SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-EMODEL NO. : ISSUED DATE: VERSION :TM097TDH01 2010-2-24 Ver. 2.0■Preliminary Specification □Final Product SpecificationCustomer :Approved by NotesSHANGHAI AVIC Confirmed : Prepared by Checked by Approved byStephen Sun 2011/2/24Hyman Chen 2011/2/24Anfernee Du 2011/2/24This technical specification is subjected to change without notice The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 1 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-ETable of ContentsTable of Contents .............................................................................................................................. 2 Record of Revision............................................................................................................................ 3 1 2 3 4 5 6 7 8 9 General Specifications ............................................................................................................... 4 Input/Output Terminals ............................................................................................................... 5 Absolute Maximum Ratings ....................................................................................................... 7 Electrical Characteristics............................................................................................................ 8 Timing Chart..............................................................................................................................11 Optical Characteristics ............................................................................................................. 14 Environmental / Reliability Test ................................................................................................ 17 Mechanical Drawing................................................................................................................. 18 Packing drawing....................................................................................................................... 1910 Precautions for Use of LCD Modules....................................................................................... 20The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 2 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-ERecord of RevisionRev 1.0 2.0 Issued Date 2011-2-14 2011-2-24 Description Preliminary Specification Release Change the Viewing Direction Editor Stephen Sun Stephen SunThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 3 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-E1 General SpecificationsFeature Size Resolution Interface Color Depth Technology Type Display Spec Pixel Pitch (mm) Pixel Configuration Display Mode Surface Treatment(Up Polarizer) Viewing Direction Gray Scale Inversion Direction Active Area(mm) Mechanical Characteristics With /Without TSP Weight (g) LED Numbers Note 1: Note 2: Note 3: 9.7 inch 1024 (RGB) x 768 RGB 24 bits with TCON 16.7M a-Si 0.192 (H) x 0.192 (V) R.G.B. Vertical Stripe TM with Normally White Anti Glare(3H) 3 o’clock 9 o’clock 196.608 (W) x 147.456 (H) Without TSP TBD 36 LEDs SpecViewing direction for best image quality is different from TFT definition. There is a 180 degree shift. Requirements on Environmental Protection: RoHS LCM weight tolerance: +/- 5%The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 4 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-E2 Input/Output Terminals2.1 CN1 of FPCPin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol NC CABC_EN1 CABC_EN0 DIMO GND VCOM DVDD MODE DE VS HS B7 B6 B5 B4 B3 B2 B1 B0 G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 GND DCLK GND L/R U/D I/O P I P I I I I I I I I I I I I I I I I I I I I I I I I I I I I P I P I I Function No connection Power ground Common voltage Power supply 3.3V DE/SYNC mode select Data input enable Vertical sync input Horizontal sync Input Blue data (MSB) Blue data Blue data Blue data Blue data Blue data Blue data Blue data (LSB) Green data (MSB) Green data Green data Green data Green data Green data Green data Green data (LSB) RED data (MSB) RED data RED data RED data RED data RED data RED data RED data (LSB) Power ground Clock for input data Power ground Left/right scan selection Up/down selection Remarks MODE=1, DE mode; MODE=0, HSD/VSD mode. L/R=1, from left to right; L/R=0, from right to left. U/D=0, from up to down; U/D=1, from down to up.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 5 of 20SHANGHAI AVIC OPTOELECTRONICS 41 VGH P Gate on voltage 42 VGL P Gate off voltage 43 AVDD P Power for analog circuit 44 RESET I Global reset pin 45 NC No connection 46 VCOM I Common voltage47 48 49 50 DITHB GND NC NC I P Dithering function Power ground No connection No connectionTM-产技 1-L-11-A-003-E DITHB=1, Disable internal dithering function; DITHB=0, Enable internal dithering function -Note:I/O definition. O---Output pin, P--- Power/Ground,N--- No ConnectionI---Input pin, 2.2U/D R/L Function Description Scan Control Input UPDN GND DVDD GND DVDD SHLR DVDD GND GND DVDD Scanning Direction Up to Down, Left to Right Down to Up, Right to Left Up to Down, Right to Left Down to Up, Left to RightThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 6 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-E3 Absolute Maximum RatingsAGND= GND=0V, Ta = 25℃ Item Symbol DVDD Power Voltage AVDD VGH VGL Operating Temperature Storage Temperature TOPR TSTG Min -0.5 -0.5 -0.3 VGH-42 -20 -30 Max 5.0 13.5 +42 +0.3 70 80 Unit V V V V ℃ ℃ RemarkThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 7 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-E4 Electrical Characteristics4.1 Recommended Operating Condition AGND=GND=0V, Ta = 25℃ Item Digital Supply Voltage Analog Supply Voltage Gate On Voltage Gate Off Voltage Symbol DVDD AVDD VGH VGL Min 3.0 12.3 20.8 -7.5 TBD Typ 3.3 12.5 22 -7.0 TBD Max 3.6 12.7 23.3 -6.5 TBD Unit V V V V V RemarkCommon Electrode VCOM Driving SignalNote: The value is for design stage only.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 8 of 20SHANGHAI AVIC OPTOELECTRONICS 4.2 Recommended Driving Condition for BacklightTM-产技 1-L-11-A-003-ETa=25℃ Item Forward Current Forward Voltage Operating Life Time Symbol IF VF Min Typ 120 19.2 30000 Max Unit mA V Hrs Remark 36 LEDs (6 LED Serial, 6 LED Parallel)Note1: For each LED: IF (1/6) =20mA, VF (1/6) =3.2V. Note2: Under LCM operating, the stable forward current should be inputted. And forward voltage is for reference only. Note3: IF is defined for one channel LED. Optical performance should be evaluated at Ta=25℃ only If LED is driven by high current, high ambient temperature & humidity condition. The life time of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.56Note4: The LED driving condition is defined for each LED module.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 9 of 20SHANGHAI AVIC OPTOELECTRONICS 4.3 Power Consumption Item Digital Supply Current Analog Supply Current Gate On Current Gate Off Current Symbol IDVDD IAVDD IVGH IVGL Panel&Gamma Power Consumption Backlight Total Condition DVDD=3.3V AVDD=12.5V VGH=22V VGL=-7.0V Min Typ TBD TBD TBD TBD TBD TBD TBDTM-产技 1-L-11-A-003-E AGND=GND=0V, Ta = 25℃ Max TBD TBD TBD TBD TBD TBD TBD Unit Remark mA mA mA mA mW W W4.4 Block DiagramThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 10 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-E5 Timing Chart5.1 TFT-LCD Input Timing DVDD=3.3V, AVDD=10.4V, AGND=GND=0V, Ta=25℃ Parameter DCLK Cycle Time DCLK Pulse Width VSD Setup Time VSD Hold Time HSD Setup Time HSD Hold Time Data Setup Time Data Hold Time DE Setup Time DE Hold Time Symbol Tcph Tcwh Tvst Tvhd Thst Thhd Tdsu Tdhd Tesu Tehd Min 14 40 5 5 5 5 5 5 5 5 Typ 50 Max 60 Unit ns % ns ns ns ns ns ns ns ns Data to DCLK Data to DCLK ConditionsInput Clock and Data timing Diagram:The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 11 of 20SHANGHAI AVIC OPTOELECTRONICS 5.2 Recommended Timing Setting Of TCONTM-产技 1-L-11-A-003-ETCON (Embedded In Source IC) Input Timing (DCLK, HSD, VSD, DE) DVDD=3.3V, AVDD=10.4V, AGND=GND=0V, Ta=25℃ Parameter DCLK Symbol Fclk th thd HSD thpw thb thfp tv tvd VSD tvpw tvb Min 1 1 Typ 65 1344 1024 160 160 806 768 23 15 Max 140 20 Unit MHZ tclk tclk tclk tclk tclk th th th th th Remarktvfp Note: DE timing refer to HSD, VSD input timing. Vertical input timing Diagram:VSD HSD DENThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 12 of 20SHANGHAI AVIC OPTOELECTRONICS Horizontal input timing Diagram:TM-产技 1-L-11-A-003-EHSDDEN5.3POWER ON/OFF SEQUENCEThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 13 of 20SHANGHAI AVIC OPTOELECTRONICSTM-产技 1-L-11-A-003-E Ta=25℃6 Optical CharacteristicsItem Symbol Condition θT View Angles θB θL θR Contrast Ratio Response Time White Red Chromaticity Green Blue Uniformity NTSC Luminance Test Conditions: 1. 2. IF= 120 mA, VF=19.2 V and the ambient temperature is 25℃. The test systems refer to Note 1 and Note 2. L CR TON TOFF x y x y x y x y U Backlight is on θ=0° 25℃ CR≧10 Min Typ 70 70 70 60 500 20 0.313 0.329 TBD TBD TBD TBD TBD TBD 75 50 220 -% % cd/m2 Note1 Note6 Note 5 Note1 Note7 Note1 Note5 Max ms Note1 Note3 Note1 Note4 Degree Note 2 Unit RemarkThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 14 of 20SHANGHAI AVIC OPTOELECTRONICS Note 1: Definition of optical measurement system.TM-产技 1-L-11-A-003-EThe optical characteristics should be measured in dark room. After 5 Minutes operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center area of the panel.Photo detector FieldItem Contrast Ratio500mm LCD PanelPhoto detector BM-5A SR-3A TRD100FieldTFT-LCD ModuleLuminance Lum Uniformity Chromaticity Response Time1°-The center of the screenNote 2: Definition of viewing angle range and measurement system. viewing angle is measured at the center point of the LCD by CONOSCOPE(ergo-80)。