Testing Condition 备 注 2.测试时产品尽量立放于料架盒内:Try to make sure the testing products are upright in the box when testing.测试点编号
Sample No.
检验項目Item
功能function 外观surface 测试员： 欧阳琳 日期：2012-6-4結论: ■ Accept □ Reject
NO.1Pretest
Sithtest
NO.2Pretest
Sithtest
NO.3合 力 泰 微 电 子 有 限 公 司
Quality Microelectronics Co., Ltd
-30℃ 30min—80℃ 30min/circle,50circle 一、判定标准：
环 境 试 验 报 告
Environmentai Test Report
试 验 数 量QTY 测试日期Testing Date 2012-6-14
机 种 编 号
Model No.
OCA
订 单 编 号Order No.3PCS 测试目的：验证LG H 0.125mm厚度的OCA
1.确保送测前产品是良品: Make sure the products for testing are good ones
测试条件：
2.测试后应保证产品表面未凝结水珠，并无明显外观不良现象（如：拱起或裂开）Make sure there are no failures caused by clotted beads or other obvious surface prblems(such as ripple or split,after testing
1、信号值在规格范围内。

二、测试方法及注意事项：Test Methods and Notices
Pretest
Sithtest
NO.4Pretest
Sithtest
NO.5
Pretest
Sithtest。