当前位置:文档之家› 变压器性能介绍

变压器性能介绍

交流输出 电抗器AC Output Reactor
技术参数 Technica l Data: 额定电流 Rated current
10-800A
额定线电 压 rated line voltage <1000V 额定频率 Rated Frequenc y:
50/Hz 电感值公 差 Toleranc e on inductan ce ±5% 冷却方式 Cooling method:
Purpose of the rectifie r transfor mers is to operate with the AC/DC power converte rs connecte d to them, to adapt the power line voltage to the voltage required by the load and to provide
20 -200kVA 额定频率 Rated Frequenc y:
50/Hz 冷却方式 Cooling method:
natural air or forced air cooling 环境温度 Ambient temperat ure:-5
to +40℃
绝缘系统 Isolatio n system: B ,F ,H
交流输入 电抗器 AC Input Reactor
技术参数 Technica l Data: 额定电流 Rated current
10-800A
额定线电 压 rated line voltage <1000V 额定频率 Rated Frequenc y:
50/Hz 电感值公 差 Toleranc e on inductan ce ±5% 冷却方式 Cooling method:
整流变压 器 Rectifie r Transfor mers 技术参数 Technica l Data: 初/次级 电压 Primary/ Secondar y Voltage : 200 -500V 额定功率 Rated Power:
20 -200kVA 额定频率 Rated Frequenc y:
隔 离变压器 的目的是 提供负载 和电源之 间的电隔 离,在所 连接设备 的绝缘失 效情况 下,在配 电系统中 防止电冲 击,还能 提供中性 点连接形 成隔离或 接地。
Purpose of these transfor mers is to provide a reliable galvanic separati on between load and power line. In distribu tion power systems they provide protecti on against electric shock, in case of insulati
The integrat ed transfor mers are connecte d at the output of a PWM power converte r with a built-in series inductan ce. The integrat ed inductan ce, in combinat ion with the output capacito rs, operates as a filter
2、4、 6、8、 12% 电感值公 差 Toleranc e on inductan ce ±5% 额定线电 压 rated line voltage <1000V 额定频率 Rated Frequenc y:
50/Hz 冷却方式 Cooling method:
natural air or forced air cooling 环境温度 Ambient temperat ure:-5
to +40℃
绝缘系统 Isolatio n system: B ,F ,H
应用 Applicat ions
变频器输 出侧一般 含较多高 次谐波。 当电机与 变频器距 离较远 时,因线 路中由较 大的分布 电容。其 中某次谐 波可能在 回路中产 生谐振, 带来两个 方面影 响: 1)
natural air or forced air cooling 环境温度 Ambient temperat ure:-5
to +40℃
绝缘系统 Isolatio n system: B ,F ,H
应用 Applicat ions
交流 输入电抗 器的作用 是: 1)
提高输入 侧的功率 因数; 2)
环境温度 Ambient temperat ure:-5
to +40℃
绝缘系统 Isolatio n system: B ,F ,H
应用 Applicat ions
整 流电抗器 是用来减 少线电流 里的谐波 成分,限 制短路电 流,使线 电压波峰 波谷值衰 减,从而 延长了电 力半导体 设备的使 用寿命, 限制了开 关瞬间的 转换电流 。整流电 抗器的串 连阻抗由 50Hz下相 对电压降 du%表示 。它是由 在额定电 流下,与 额定线电 压的百分
应用 Applicat ions
整 流变压器 的作用是 连接到 AC/DC电 源转换器 上将电源 侧电压转 换为负载 所需电压 但不提供 负载和电 源之间的 电隔离。
Purpose of the rectifie r transfor mers is to operate with the AC/DC power converte rs connecte d to them, to adapt the power line voltage to the voltage required by the load but can’t provide
有效消除 输入侧的 高次谐 波,防止 因电压波 形畸变造 成其它设 备损坏; 3)
消除电源 相间不平 衡引起的 输入电流 不平衡。 The function of these reactors is: 1)
Improvin g the input power factor;
2)
Eliminat e the high frequenc y harmonic s in the input and prevent the voltage distorti on from damaging other equipmen t; Eliminat e the input current unbalanc e due to the unbalanc e of the input three phases.
The function of these reactors is to reduce harmonic in the line current, to limit the short circuit currents (thanks to reductio n of di/dt rate), to attenuat e the line voltage peaks and sags
1)
Damaging the motor insulati on and damaging motor that has been in this status for a long time; 2)
输入电 压:从 200 V到
500 V 输出
电压:从 200 V
到 500 V 工作
功率:从 20 W
到 200000 W
整流电抗 器 communic ation reactor
技术参数 Technica l Data: 额定电流 Rated current
10-400A 电压降 Voltage drop du%
Purpose of the integrat ed transfor mers is to adapt the UPS converte r output voltage to the line voltage required by the load and to provide galvanic separati on between UPS and load.
50/Hz 冷却方式 Cooling method:
natural air or forced air cooling
环境温度 Ambient temperat ure:-5
to +40℃
绝缘系统 Isolatio n system: B ,F ,H
应用 Applicat ions
整 流变压器 的作用是 连接到 AC/DC电 源转换器 上将电源 侧电压转 换为负载 所需电压 并且提供 负载和电 源之间的 电隔离, 适合运行 再6脉冲 或12脉冲 的整流器 中。
破坏电机 绝缘性 能,长时 间会损坏 电机; 2)
产生大漏 电流,引 起变频器 频繁保护 。
一 般变频器 和电机超 过100m, 建议在变 频器输出 侧和电机 之间靠近 变频器加 装交流输 出电抗器 。
The inverter output voltage usually has high frequenc y harmonic s. The distribu ted capacita nce will be big if the inverter is far away from the motor, therefor e resonanc e may occur, which may result
输入电 压:从 220 V到
380 V 输出
电压:从 220 V
到 380 V 工作
功率:从 1000
W到 100000 W
自耦变压 器 Autotran sformers
技 术参数 Technica l Data: 初/次级 电压 Primary/ Secondar y Voltage : 200 -500V 额定功率 Rated Power:
相关主题