Exporting a de015 ANSYS, Inc.
Index
• Description • Solution • Attachments • References
2
© 2015 ANSYS, Inc.
Description
• Step by step procedure to export a deformed geometry
2) RMB on « geometry synthesis -> initial geometry 3) RMB on Initial geometry -> Convert to parasolid
8
© 2015 ANSYS, Inc.
Solution
At this step the created bodies are surfaces : 1) RMB on « parasolid geometry » -> add a sew tool
When selecting « Solid » in the tree, the body has to appear deformed
6
© 2015 ANSYS, Inc.
Solution
After that, link a FE Modeler box on the model of the duplicated analysis
3
© 2015 ANSYS, Inc.
Solution
On the project page, duplicate the initial mechanical analysis
4
© 2015 ANSYS, Inc.
Open the previously duplicated analysis
Solution
2) Select surface bodies and « apply » 3) RMB on parasolid geometry -> export to parasolid file
9
© 2015 ANSYS, Inc.
Solution
If your CAD doesn’t support parasolid files : 1) Create a geometry box on the project page 2) Select the parasolid file created previously 3) In DM export to the desired format (stp, iges…)
Update the model line and refresh FE Modeler. Open FE Modeler
7
© 2015 ANSYS, Inc.
Solution
In FE Modeler : 1) RMB on « Skin Detection Tool » -> create skin components
In Mechanical, RMB on Geometry > -> « Update geometry from results file » (beta options have to be active)
5
© 2015 ANSYS, Inc.
Default options are OK
Solution
10
© 2015 ANSYS, Inc.
Attachments
• 2040122.wbpz
11
© 2015 ANSYS, Inc.