Copyright © 2002, 2003 Huntsman LLC
Warning : Polyurethane products manufactured from these chemicals may present a fire hazard if improperly used. Each manufacturer or user of such products should determine whether there is potential hazard and take the necessary precautions.
Huntsman LLC warrants only that its products meet the specifications stated herein. Typical properties, where stated, are to be considered as representative of current production and should not be treated as specifications. While all the information presented in this document is believed to be reliable and to represent the best available data on these products, NO GUARANTEE, WARRANTY, OR REPRESENTATION IS MADE, INTENDED, OR IMPLIED AS TO THE CORRECTNESS OR SUFFICIENCY OF ANY INFORMATION, OR AS TO THE SUITABILITY OF ANY CHEMICAL COMPOUNDS FOR ANY PARTICULAR USE, OR THAT ANY CHEMICAL COMPOUNDS OR USE THEREOF ARE NOT SUBJECT TO A CLAIM BY A THIRD PARTY FOR INFRINGEMENT OF ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT.EACH USER SHOULD CONDUCT A SUFFICIENT INVESTIGATION TO ESTABLISH THE SUITABILITY OF ANY PRODUCT FOR ITS
INTENDED USE. Products may be toxic and require special precautions in handling. For all products listed, user should obtain detailed information on toxicity, together with proper shipping, handling, and storage procedures, and comply with all applicable safety and environmental standards.Main Offices: Huntsman Belgium BVBA / Everslaan 45 / B-3078 Everberg, Belgium / 32-2-758-9211Technical Services Section: Technical Services / Hamburg Office / 49-40-36670-162
Technical Bulletin
_______________________________________________________________________
JEFFCAT ® Z -130 CATALYST
DESCRIPTION
JEFFCAT ® Z-130 catalyst chemical identity is N,N,N’,N’-tetramethyldipropylenetriamine. It acts as a low-odour, reactive, amine catalyst designed for use in rigid, semirigid, flexible and packaging polyurethane foams.
STRUCTURE
H 3C H CH 3 \ | / N - CH 2 CH 2 CH 2 -N- CH 2 CH 2 CH 2 - N / \H 3C CH 3
TYPICAL PROPERTIES
Appearance
Clear liquid,substantially free of suspended matter Water, wt-%
0.15Flash point, PMCC,°C 88Freezing point, °C - 78Density, g/ml, 20/20°C 0.84Viscosity, cps, 40 °C
1.93
Current sales specification can be obtained from any Huntsman LLC sales office.
SUGGESTED USES
JEFFCAT ® Z-130 catalyst is recommended for use in all water-blown, packaging foams and in automotive applications requiring low fogging. It can be used alone or in combination with other amine and metal catalysts to achieve the desired reaction profile.
Rigid foams made with JEFFCAT ® Z-130 catalyst show a uniform, fine cell-structure. This catalyst is low in odour and gives excellent postcure characteristics.
AVAILABILITY
JEFFCAT ® Z-130 catalyst is available in bulk and in non-returnable drums of 165 kg net. Requests for samples may be made through any Huntsman LLC sales office.
REGULATORY STATUS
CAS No:6711-48-4EINECS:229-761-9TSCA:
Registered
STORAGE AND HANDLING
Please refer to our bulletin “Storage and Handling of JEFFCAT ® Catalysts” and the Material Safety Data Sheet on this product for necessary information.
PRODUCT SAFETY POLICY
It is the policy of Huntsman LLC Europe to provide customers with information on the safe handling and use of our products. The Material Safety Data Sheet (MSDS) should always be read and understood thoroughly before handling the product,and adequate safety procedures should be rmation on the toxicity environmental and industrial hygiene aspects of our products may be found in the MSDS, which is available upon request through any Huntsman LLC Europe sales office.。