Series is represented by a three-letter code. When the series name only has two letters, use a hyphen, “-“, to fill the third blank. When the series name has 4 letters, use the following series codes. OCVZ→OVZ; OCVU→OVU
② ~ ④: Please refer to Part Numbering System (Radial Type)
⑤ Package:
TR Reel package T- Tray package for case diameter 12.5 ~ 18mm
⑥ Terminal:
- No dummy terminal A For automotive application (10G) K Anti-vibration structure (30G) G Anti-vibration structure (50G)
All product specifications in the catalog are subject to change without notice. (CAT. 2013E2)
11
【 南京南山半导体有限公司 — 贴片铝电解电容器选型资料-LELON/立隆电解电容】

Carrier Tape
TR
□□
⑤
Package Type
-
□
⑥
Terminal Type
4φ×5.3L
0405
□□□□
Pb-free and PET coating case
□
⑦
Case size
⑧
Lead Wire and Coating Type
⑨
Supplement Code
① Series:
φD×L 18×45 18×50 20×30 20×35 22×35 22×40 22×45 25×40 25×45
Code 1845 1850 2030 2035 2235 2240 2245 2540 2545 Note 1: Size codes with a mark of “ * ” are for OP-CAP. Note 2: When a case size is required and not shown in the table, please contact with us for further discussion.
1E
1V
1H
1J
1K
2A
Voltage (WV) 160 200 250 315 350 400 420 450 500 525
Code
2C 2D 2E 2F 2V 2G 2P 2W 2H 2Y
⑤ Lead configuration and package (Please refer to page 17 ~ 19):
5×4.5 0504
5×5.3 0505
5×5.7 0506
5×5.9 0506*
6.3×4.5 6.3×5.3
0604
0605
φD×L Code
6.3×5.7 0606
6.3×5.9 0606*
6.3×7.0 0607*
6.3×7.7
0607 0608*
8×6.5 0806
8×6.7 0807*
Product Guide
Part Numbering System (Radial Type)
⑦ Case size:
The first two digits indicate case diameter and the last two digits indicate case length in mm.
& Package
⑥
Rubber Type
⑦
Case Size
⑧
Lead Wire and Sleeve Type
⑨
Supplement Code
①Series:
Series is represented by a three-letter code. When the series name only has two letters, use a hyphen, ”-“, to fill the third blank. When the series name has 4 letters, use the following series codes. OCRZ→ORZ; OCRK→ORK; OCRU→ORU
10
All product specifications in the catalog are subject to change without notice. (CAT. 2013E2)
【 南京南山半导体有限公司 — 贴片铝电解电容器选型资料-LELON/立隆电解电容】

⑧ Lead wire and sleeve type:
None = Standard design Pb-free wire + PET sleeve (aluminum e-cap) Pb-free wire + Coating case (OP-CAP)
B = Sn-Bi wire + PET sleeve
② Capacitance:
Capacitance in μF is represented by a three-digit code. The first two digits are significant and the third digit indicates the number of zeros following the significant figure. “R” represents the decimal point for capacitance under 10μF. Example:
⑦ Case size:
The first two digits indicate case diameter and the last two digits indicate case length in mm.
φD×L Code
3×5.3 0305
4×4.5 0404
4×5.3 0405
4×5.7 0406
Gas Type
5φ×11L
Pb-free Wire + PET Sleeve
REA
100
M
1H
TA
-
0511
□□□ □□□ □ □□ □□ □ □□□□ □
①
Series
②
③
Capacitance
Capacitance Tolerance
④
Rated Voltage
⑤
Lead Configuration
⑥ Rubber type:
– = Gas escape type or standard design*
F = Flat rubber bung
Note :For case sizes of 3φ×5L, 12.5φ×16L, 16φ×16L, 16φ×20L, 18φ×16L, 18φ×20L, 18φ×25L of aluminum e-caps and 6.3φ×6 ~ 8L and 8φx8L in OCRZ, ORE, OCRK series of OP-CAP, flat rubber bung is the standard design. In these cases, use a hyphen, “-“, in this digit.
Product Guide
Part Numbering System (SMD Type)
Product Code Guide
VE series
VE-
□□□
①
Series
10μF
±20%
100
M
□□□ □
②
③
Capacitance
Capacitance Tolerance
16V
1C
□□
④
Rated Voltage
* When the automotive control code is required, please contact with us for further discussion.
⑨ Supplement code (Optional):
For special control purposes
Capacitance 0.1
0.47
1
4.7
10
47
100
470 1,000 4,700 10,000
Part number 0R1 R47
010
4R7
100
470
101
471
102
472
103
③ Tolerance:
J = -5% ~ +5%
K = -10% ~ +10%
M = -20% ~ +20%
【 南京南山半导体有限公司 — 贴片铝电解电容器选型资料-LELON/立隆电解电容】

Product Guide
Part Numbering System (Radial Type)
Product Code Guide
REA series
10μF
±20%
50V
Lead Forming Tape
V = -10% ~ +20%
④ Rated voltage: