0 2 1=有效 (在 LOC 时)
允许或不允许门重开
2=有效（在 LOC 时即使曾经开过）
1 60 1…60 秒，每步一秒
内呼或外呼时, 门保持开启的时间
1 250 0.1…25 秒，每步 0.1 秒
按开门按钮时,门保持开启的时间
0=no ADO, ACL, COD,1=ADO, ACL,
0
7
COD, 2=no ADO, no ACL, no COD, 3= ADO, no ACL, no COD, 4= ADO, no ACL, COD, 5=ADO, ACL, no COD, 6=no ADO,
2-01=Set PIN code for group 1
2-02=Set PIN code for group 2
...
2-63=Set PIN code for group 63
-------------------------------------------------
UI Range 300's
1-02=Reset (clear) locked group 2
...
1-63=Reset (clear) locked group 63
0
304
------------------------------------------------UI Range 200's
2-00=Set PIN code for Master group
UI Range 300's Program the PIN code for the features that can be activated/deactivated via a PIN code entry on the COP. Only available if menu item 1-4 = 1.
Enables or disables the PIN code features.
UI Range 0 to 99 Define the floors that are members of each PIN code locked group.
UI Range 100's Clear the floors that were set via 1-5-1 to 1-5-63. Individual groups can be cleared, or all groups can be cleared at one time.
3 液压电梯
4 PIN codd
5
Features and Car Call PIN
Code Locking
(PCL) Setup
安全
默认 值 1 2 0 0
0
最小 最大 值值
数据
** ** 楼层数
1
6
1=SBC，2=DC，3=FC，4=PB， 5=MPB，6=FC 带 DIA
...
63=Define floors of locked group 63
-------------------------------------------------
UI Range 100's
1-00=Reset (clear) all locked groups
1-01=Reset (clear) locked group 1
UI Range 200's Program the PIN code for the locked groups that can be deactivated via a PIN code entry on the COP. Only available if menu item 1-4 = 1.
Notes: 1) Elevator must be in RDF (machine room inspection) when this is changed.
6 锁定取消
*
7 输入安全码时间 8
8 访问控制
0
9 关闭重新开门
0
10 开门时间
5
11 重新开门时间
20
门
12
选择 ADO，ACL 和修正运行
通力电梯产品调试技能培训
--LCE 菜单（1-5）/（7-8）
E 故障
功能
1 故障历史 2 清除故障历史
默认 值 * *
最小 值 * 0
最大 值
数据
* 1=最近纪录
1 设定 1 时清除故障纪录
描述
按箭头健滚动故障纪录 从 E 菜单中清除故障纪录
d 驱动 故障
1 电梯参 数
功能
1 主楼层
2 控制模式 必需
Calls from E-link
submenu 6 = lockings overridden by DELI
1 59 秒
从输入第一个按钮到安全代码输入完的时间（全能访问）
0=关闭 0 2 1=全能访问（IAC）
2=高级安全界面（HLI）
允许或不允许访问控制
0=有效 (在被锁层楼,开门按钮不起作用)
1
子菜单 1=由 PRC 取消
子菜单 2=由 PRL H/HEL 取消
子菜单 3=由 PRL L 取消
1
6 子菜单 4=由 ATS 取消
submenu 5 = lockings overridden by
定义选哪个开关取消锁定
Destination Calls from PC-group or Car
Set PIN code for PIN activated features:
3-01=PRC
3-02=OSS
3-03=OCL
3-04=OCV
描述 选择主入口楼层, 对下集选非常重要, 因为所有的外呼都 朝向主楼层. 外呼集选方式, SBC=单按钮集选, DC=下集选, FC=全集 选, PB=按钮,MPB=记忆按钮有 DIA.
1
0=PIN code not in use 1=PIN code in use
UI Range 0 to 99
0=Setup of PCL and PIN codes accepted
1=Define floors of locked group 1
2=Define floors of locked group 2
0=没有，1=液压梯，2=防滑行，3=液压+ 液缸限位开关，4=防滑行+液缸限位开关
0 7 5=KCM831 Hydro with telescopic jacks 6=KCM831 Hydro with PPS 7=KCM831 Hydro with telescopic jacks + PPS
0