GLORG: GLOBK coordinate frame realization programGLORG:GLOBK坐标框架实现程序GLORG Ver 5.13: Origin resolution program for the GLOBK.GLORG Ver5.13：GLOBK的原始解决程序。

Runstring:% glorg <output> <options> <command_file> <com_file> <OPTION>where <output> is the name of the output file (may be 6 for outputto current window.<output>输出文件的名字（输出到当前窗口为6位）<options> is the bit mapped option selection or it can bespecified by codes separated by : or = (no spaces)(Code feature added at Ver. 4.0)<options>是二进制选项，可以用代码表示，用：或=（不是空格）分开（4.0版本增加代码功能）The options are:CODE BIT Decimal MeaningCORR 0 1 Output correlation matrix输出相关矩阵BLEN 1 2 Output baseline lengths and components输出基线长度和元件BRAT 2 4 Output baseline lengths and components ratesof change.输出基线长度和元件的变化率CMDS 3 8 Write a summary of the markov file to theoutput file.将马尔科夫文件的总结写入输出文件VSUM 4 16 Write the short version of the velocity fieldinformation (one line per site)写出速度场信息的短版本（每个站点一行）5-9 32-512 NO LONGER USED (see POS_ORG and RATE_ORGbelow).不再使用（参见下面POS_ORG 和RATE_ORG）RAFX 10 1024 Fix the Right ascension origin of the system.固定系统的赤经起点MOUT 11 2048 Only output baselines if both sites are Markov.(Used to limit output in large back solutions)如果站点都是马尔科夫，只输出基线（用来限制大型的返回解决方案）COVA 12 4096 Output full precision covariance matrix.输出所有精确协方差矩阵PSUM 13 8192 Output position adjustments in summary form以摘要形式输出位置调整GDLF 14 16384 Output the GDL file used in the solution输出解决方案中的GDL文件DBUG 15 Output matrix details when there are negativevariances and negative chi**2 increments如果有负方差和负chi**2增量，输出矩阵细节ERAS 16 Erase the output file before writing solution写解决方案前改正输出文件NOPR 17 Do not output the file (either crt, prt or orgdendending on opt set).不输出文件（根据选项设置，决定crt，prt或org）SDET 18 Output details of the stabilization calculationsin glorg输出稳定计算的细节在glorgRNRP 19 Report the statistics of the differences in thepositions and velocities of renamed sites. Alsogenerates equate lines than can be filtered withshell script sh_exeqs. The equates lines arewritten to file <org root>.eqs报告重命名站点的位置和速度差异统计。

同时生成能被外壳脚本sh_exeqs过滤的等同线。

FIXA 20 Automatically fixes differences in aprioris whenequates are made (except for positions thatdiffer by more than 1.0 m)等同线生成时自动修正显眼差异（除了差异在1m以上的位置）PLST 21 Report the list of parameters to be estimated tolog file before running the globk filter. (Iflist is not the expected groups of stations, theglobk run can killed, the globk command file fixedand run re-started.在globk过滤运行之前，报告对于日志文件的估计参数列表。

（如果列表不是期望的站点组，那么globk运行终止，globk命令文件修复并重启）GEOD 24 Output GEOD coordinates (WGS84) (sh_exglk -g option)输出GEOD坐标系（WGS84）（sh_exglk –g选项）UTM 25 Output UTM coordinates (WGS84) (sh_exglk -u option)输出UTM坐标系（WGS84）（sh_exglk –u选项）SMAR 26 Report site procoss noise in globk output报告globk输出中的站点过程噪声PBOP 27 Sets position and velocity line output for PBO processing(needed to generate time series files with tssum)设置PBO过程的位置和速度线输出（需要生成关于tssum的时序文件）MIDP 28 Sets the output and binary hfiles to be referenced tothe mid-point epoch of the combined data (See discussionin globk.hlp).Feature introduced in verions 5.13 (070824)设置关于组合数据的中间点星历的输出和二进制文件（详见globk.hlp的讨论）添加在5.13版本中的功能（070824）RENM 29 Outputs the list of renames to the log file. Usefulwhen the BREAK command in am EQ-File is used. Needs tobe invoked when GLOBK is run.输出重命名列表到日志文件。

当BREAK命令在EQ-File中被使用时有用。

当GLOBK运行时需要被引入。

For example: BLEN:BRAT:VSUM would output baseline lengths,baseline rates and a summary velocity field.举例: BLEN:BRAT:VSUM输出基线长度，基线速度和速度场总结。

<command file> is the name of the command file, snf<com_file> is the name of globk common file used in the analysis.<OPTION> string that can appear at the starts of command file lineswhich will be executed. (Normally these lines are ignoredsince they do not start with a blank. (New Ver 5.08). If theoption was used when globk was run, the same option will beuse in interpretting the glorg command file unless a differentstring is used when glorg is run.<command file>是命令文件的名字，snf<com_file>是在分析的globk命令文件中的名字。

<OPTION>出现在即将被执行的命令文件行的开始的字符串。

（一般这些行被忽略，因为它们开头不是空格）（新版本5.08）如果当globk运行时，使用该选项，那么相同的选项将用来解释glorg命令文件，除非glorg运行时又使用了新的字符串。

Features added at version 5.13 (070824)---------------------------------------MIDP output option which references solutions to the midpoint epoch of thecombined data. Feature should not be used when large stochastic positionvariations are present.MIDP输出选项，该选项参考组合数据星历中心点的的解决方案。