Flash ISP (In-System Programmable)
芯片型号
描述
AT89C5115
Low-pin-count 8-bit Microcontroller with A/D Converter and 16K Bytes of Flash Memory We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to related application note: External Brown-out Protection for C51 Microcontrollers with Active High Reset Input
High performance 8-bit Microcontroller 16 kbytes Flash We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to related application note: External Brown-out Protection for C51 Microcontrollers with Active High Reset Input High performance 8-bit microcontroller 32 Kbytes Flash We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to related application note: External Brown-out Protection for C51 Microcontrollers with Active High Reset Input High performance 8-bit microcontroller with 64 Kbytes Flash
High performance 8-bit microcontroller with 128 Kbytes Flash Low-Voltage Microcontroller with 4K Bytes In-System Programmable Flash Low-Voltage Microcontroller with 8K Bytes In-System Programmable Flash 2.7-Volt 80C31 Microcontroller with 2K Bytes In-System Programmable Flash 20-pin Package. 2.7-Volt 80C31 Microcontroller with 4K Bytes In-System Programmable Flash 20-pin Package. 8-bit Microcontroller with 4K Bytes In-System Programmable Flash
AT89C51AC2
8-bit microcontroller with 32Kbyte Flash, 2KByte EEPROM and 10-bit A/D converter We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to related application note: External Brown-out Protection for C51 Microcontrollers with Active High Reset Input
AT89C51IC2 is a 80C51 8-bit microcontrollers featuring a 32K bytes Flash code memory and a two-wire interface (TWI).
High performance 8-bit microcontroller 64 Kbytes Flash, 2 Kbytes EEPROM and Two Wire Interface (TWI).
8-bit Microcontroller with 8K Bytes In-System Programmable Flash
AT89S8253
In-System Programmable Microcontroller with 12K bytes Flash 2K bytes EEPROM
Flash ISP - Single Cycle Core 芯片型号
● 4 KB version: AT89LP4052
AT89LP4052
4-Kbyte In-system Flash -- Single-Cycle Microcontroller 256 Bytes RAM,SPI PWM,20 MIPS Throughput at 20 MHz.. ● 2 KB version: AT89LP2052
8051结构单片机选型参数表
● OTP (One-Time Programmable) ● ROM ● ROMless ● USB MCUs
芯片型号 AT89C51CC03
CAN Networking MCUs
描述 8-bit microcontroller with CAN controller and 64-Kbyte Flash. 2-Kbyte RAM, 2-Kbyte EEPROM, SPI. Power Fail Detect (no need for external brown- out). Pinout compatible with T89C51CC01.
8-bit microcontroller with CAN controller and 32- Kbyte Flash AT89C51CC01 T89C51CC01 We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to
AT89C51ED2 AT89C51IC2 AT89C51ID2
AT89C51RB2
AT89Байду номын сангаас51RC2
AT89C51RD2 AT89C51RE2 AT89LS51 AT89LS52 AT89S2051 AT89S4051 AT89S51 AT89S52
High performance 8-bit microcontroller 64 Kbytes Flash, 2 Kbytes EEPROM
AT89LP214 AT89LP216
AT89LP2052
2-Kbyte In-system Programmable Flash -- Single Cycle 8051 Microcontroller 128 Bytes RAM UART SPI I/O = 12 Analog Comparator Internal RC Oscillator On-chip Debug 2-Kbyte In-system Programmable Flash -- Single Cycle 8051 Microcontroller 128 Bytes RAM PWM UART SPI I/O = 16,Analog Comparator, Internal RC Oscillator,On-chip Debug 2-Kbyte In-system Flash -- Single-Cycle Microcontroller,256 Bytes RAM,SPI,PWM,20 MIPS Throughput at 20 MHz..
AT89LP213
描述
2-Kbyte In-system Programmable Flash -- Single Cycle 8051 Microcontroller, 128 Bytes RAM, PWM, SPI, I/O = 12, Analog Comparator, Internal RC Oscillator, On-chip Debug
● CAN Networking MCUs ● Flash (Reprogrammable) ● Flash ISP (In-System Programmable) ● Flash ISP - Single Cycle Core ● Lighting MCUs
ATMEL 爱特梅尔 > 8051结构单片机
Lighting MCUs 芯片型号 AT83EB5114 AT89EB5114
描述
Dedicated to lighting control applications,the AT83EB5114 retains all the features of the standard 80C51 with 4 Kbytes ROM program memory,256 bytes RAM,256 bytes EEPROM,a 7-source,4-level interrupt system,an onchip oscillator and two timers/counters. Analog functions include a 10-bit,6 channels A/D converter and two optimized PWM units.