GOF= Glass Optic Fibre HCS = Hard Clad Silica Fibre POF = Plastic Optical Fibre
OR
OR
NISA-03 (ISA)
PCMCIA-adapter (PCI) + NDPA-02 (PCMCIA) + NDPC-02 (5Mb) or
3. Ring. Drives can be connected in a ring .
An individual address to be set by parameter 70.02 or 70.15 for every drive in the link.
Note! all the drives in the ring should have power supply on all the time. Otherwise the ring will break.
common manner)
2. Through the distributor,
DriveWindow-link (sectional drives). An individual address to be set by parameter 70.02 or 70.15 for every drive in the link.
Note ! Do not use address one (1) if several drives are in a network (ring or connected together with the distributors). The first (1.) address are meant for sparepart use.
adapter)
Functions
·Network adapter when using remote connection
·Control operations (start, stop, references, etc.) ·DDCS cabling
·Monitoring signals in numerical and graphical format
DriveWare®
Getting start
1. OR
Double-click the program icon
2.
Select OK
DriveWindow 2
Open Browse Tree by Double-clicking the motor
Tool bar
BROWSE TREE PANE
MSTR
NDBU-95/85
... 8 7 6
0
Optical distributor 9 channels
CH 3
MSTR
NDBU-95/85
8 76
0
...
CH 3
HCS
max 200 m OR
POF
max 30m
CH 3 CH 3 CH 3 CH 3
© ABB Oy FINLAND- 3 -
DriveWare®
ITEM LIST PANE
Size of the window parts can be changes
TREND DISPLAY PANE
TREND SETTINGS PANE
Status bar
DRIVE STATUS OFF-LINE or COMM. BREAK
NOT RUNNING RUNNING (forward) FAULT WARNING
NDPC-12 (10Mb)
DDCS-protocol 1 Mbit/s
2.
NDPA-02 (PCMCIA) + NDPC-02 (5Mb) or
NDPC-12 (10Mb)
GOF
max 1000m (NOCR-01 is required)
HCS
max 200 m OR
POF
max 30m
1. 3.
© ABB Oy FINLAND- 4 -
DriveWindow 2
1.
Most of the operations can be done only when the drive is in REMOTE-control (Not the local control with the DriveWindow)
User Interface
Menu bar
Title bar
DriveWindow area
© Oy FINLAND- 5 -
DriveWare®
DriveWindow 2
• Operating system Windows NT, Windows 2000, or Windows XP
Required DriveWindow hardware:
·ISA card, or
·PCMCIA-card
(PCMCIA-slot or PCI-slot with PCI/PCMCIA
·Parameters (changing values)
·Datalogger (controls, display)
·Fault Logger (display faults, controls)
·Back-up & Restore (complete software back-up)
·All functions over network (control, monitoring, etc.)
© ABB Oy University - 1 version: 06.2004
DriveWare®
DriveWindow 2
DriveWindow 2
Introduction
• DriveWindow is Windows Application for commissioning and maintaining ACS600, ACS800, ACS6000, ACS1000 and DCS600.
DriveWare®
© ABB Oy FINLAND- 2 -
DriveWindow 2
Connection
Connection alternatives:
1. Direct connection (point-to point) between the PC and the drive (the most