Working place should be well ventilated, using tools and installations of flameproof type. Operators is suggested to wear gas masks ,safety protective glasses and rubber oil-resistant gloves Avoid human bodies to contact with the product and inhalation of solvent vapor.Pay attention to safety and fire prevention.
Protection of body ：wear relevant protective working clothing ;
Protection of hands ：wear chemical-resistant rubber gloves.
Other protections ： Do not smoke, eat , and drink in the working place. Take bath and change clothes after work. Carry out health examination pre-job and at regular intervals.
Saturated vapour pressure:(KPa):1.33(32℃)
200# gasoline:;
Explosion upward limit（V/V）:6.0
Explosion downward limit%（V/V）:1.3
Saturated vapour pressure:(KPa):1.33(32℃)
Drink enough amount of warm water, press vomiting, and the very sick person should seek medical advice.
Breathe in：
Leave the scene rapidly to the site with fresh air, keep respiratory tract unimpeded, give oxygen therapy if breath is in difficulty(despnoea), give recue breathing if respiratory arrest, give heart massage if cardiac arrest, then seek medical advice as soon as possible.
施工及待干过程要有良好的通风环境，保证的持续流通的新鲜空气，施工者应注意配戴防护用品，避免人体接触油漆的吸入溶剂，并注意防火、安全。
急 救 措 施
防护措施
灭火材料
●皮肤接触：脱去污染的衣着，用肥皂水和清水彻底冲洗皮肤。
●眼睛接触 :立即提起眼睑，用大量流动清水或生理盐水冲洗至少15分钟，就医。
●食 入：饮足量温水，催吐，就医。
铁红醇酸防锈漆MSDS
l
性状
危险性
油漆闪点：约34℃
主要有害成份:
200#汽油：
爆炸上限%（V/V）：6.0
爆炸下限%（V/V）：1.3
饱和蒸汽压（KPa）：1.33(32℃)
产品内所含溶剂为易燃性和挥发性有机物质，若与空气接触，积聚到一定浓度极限时，一旦接触明火、火花、静电或高热，很容易引起火灾。燃烧时放出一氧化碳，二氧化碳有毒气体。
Authorized personnel: Auditor: Date of establishment: Date of implement:
安全运输、涂装及储存
搬运时要轻装轻卸，防止包装和容器破损。
运输时运输车辆应配备相应品种和数量的消防器材及泄漏应急处理设备。运输时严禁与食用化学品等混装混运。运输途中应防曝晒、雨淋、防高温。中途停留时应远离火种热源。避免与氧化剂接触。运输车辆要有接地装置，防止静电的积聚。
储存于阴凉，通风的库房，远离火种，热源。库温不宜超过40℃。保持容器密封。采用防爆型照明、通风设施。
●吸 入：迅速脱离现场至空气新鲜处，保持呼吸道畅通，呼吸困难时给输氧，如呼吸及心跳停止，立即进行人工呼吸和心脏按摩术，就医。
●呼吸系统防护：空气中浓度超标时，佩戴自吸过滤式防毒面具（半面罩）。紧急事态抢救或撤离时，应该佩戴空气呼吸器。
●眼睛防护：戴化学安全防护眼镜。
●身体防护：穿一般作业防护服
●手防护 ：戴橡胶耐油手套
Safety transportaቤተ መጻሕፍቲ ባይዱion,coating and storage
Carefully andgentlyload, unload and transport the product,avoid damage of package or container.
Provide appropriate fire extinguishing equipment and facilities of emergency leak treatments on the transportation.Strictly avoid mixing, loading and transport with chemicals for food use .Exposure to sun light, rain, and high temperature should be avoided on the way of transportation. Keep distance from flame, heat and strong oxidizing agents.Vehicles for transportation should have grounding device to avoid accumulating of static electricity.
Hazard, dangerousness
Flash point of the paint: about 34℃
Main harmful ingredients:
Xylene:
Explosion upward limit（V/V）:7.0
Explosion downward limit%（V/V）:1.1
Protection of respiratory system：
Wear gas maskduring workwhen the concentration in the airexceed theacceptablelimit
Protection of eyes ：wear safety protective glasses;
The product should be stored in a cool and well ventilated warehouse and should be kept distance with fire and heat sources, the suitable storage temperature being less than 40℃. Keep the paint containers tightly closed. Use lighting facility and ventilation facility of explosion proof type.
First aid measures
Safeguard procedures
Fire extinguishing material
Contact with skin：
Take off the contaminated clothes, rinse skin thoroughly with soap water and clear water.
Use solvent resistant foam, dry powder, carbon dioxide, 1211,sand and soil Spray water to cool down the containers, and remove containers from fire site to open space if it is possible.
Contact with eyes:
Take up the eye lips，rinse with running clear water or physiological saline for at least 15 minutes, seek medical advice if needed.
Take in：
●其它防护：工作现场禁止吸烟、进食和饮水，工作完毕，淋浴更衣。实行就业前和定期的体检。
●用抗溶性泡沫、干粉、二氧化碳、1211、砂土。喷水冷却容器，可能的话将容器从火场移至空旷处。
编制：审核：编制日期：实施日期：
MSDS ofIron Red Alkyd Anti-rusting Paint
Characteristics
Solvents contained in this product are inflammable and volatile material,Air and vapor of this product may form an explosive mixture which will be burnt if met with fire, static electricity or high heat, poisonous gases like carbon monoxide,carbon dioxide will be released during the combustion.