《水泥工程》2010-3Discussion on energy saving and emission reduction of building material industry in the trend of low-carbon economyThe requirements and trend of low-cabon economy in domestic and oversea was summarized, and the development of building material industry and the state of it’s energy consumption ,solid waste usage ,main pollutant discharge and the preventions were introduced.The gap between China and develop countries in energy saving and emission reduction and pollution control of building material industry as well as the problems were pointed out.Finally,several suggestions of realizing saving energy and emission reduction were put forward.浅谈低炭经济趋势下建材工业的节能减排概述了国内外低炭经济发展的要求和趋势,介绍了建材工业的发展状况以及建材工业能源消耗、固体废物利用和主要污染物排放水平和治理现状；指出了我国建材行业在节能减排、污染防治方面与世界发达国家的差距以及存在的诸多问题；最后提出了为实现建材行业节能减排目标的几个方面的建议。
consumption [英] [kənˈsʌmpʃən]网摘：MON ENGLISH GIOSSARY OF CEMENT INDUSTRY水泥工业常用英语词汇收藏指正2.Adhere to technical progress and speed up structural adjustment in our cement industry坚持技术进步加速我国水泥工业结构调整收藏指正3.APPLICATION OF MINIMATE EDXRF SPECTROMETER TO CEMENT ANALYSIS Minimate EDXRF谱仪在水泥工业分析中的应用收藏指正4.In a word, the cement意在抛砖引玉，以科学发展观引领水泥工业可持续健康发展。
收藏指正5.Apply to remove the dust under situation of welding soot, mechanical process, pharmacy, cement and viscosity medium.适用于焊接烟尘、机械加工、制药、水泥工业及粘性介质的过滤。
收藏指正6.New dry process kiln is not only stand for the advance level technology of cement producing at present, but also is the main direction of cement industry continual development.新型干法生产技术代表着当今水泥生产技术的先进水平，也是水泥工业可持续发展的主要方向。
收藏指正7.Great resource and energy wastage and heavy environment load is the characteristic of China cement industry.摘要我国水泥工业的生产特点是资源和能源消耗较高、环境负荷较大。
收藏指正8.There have been tens of 2500 t/d NSP production lines designed by SINOMA Nanjing Cement Design and Rearch Institute, and real outputs of all theproduction lines have exceeded the projected output capacity.摘要中材国际南京水泥工业设计研究院承担设计的2500t/d新型干法水泥生产线已有数十条投产，并且所有的生产线实际产量都超过了设计能力产量。
收藏指正9.Applications:Mainly for manufacture of coating and paint;mixed with white cement in building industry to fabricate artificial marble;coating and decora6ting on wall,cement floor;making water-color and grease-paint in in-dustry of oulture and education;colorant for leather tinting;ironoxide series pigments intermediate.用途：用于涂料、制漆、建筑工业中与白水泥混合制人造大理石墙壁粉饰，水泥地面、文教工业制水彩，油彩颜料，皮革涂饰剂的着色剂以及氧化铁系列颜料中间体等。
收藏指正10.To produce fly ash cement by utilizing five kinds of industrial waste residue of fly ash, colliery, pouter plant furnace residue, sulphuric acid residue, phospogypsum, a row material mix proportion by weight project of "High KH and intermediate SM and IM" is designed, technical ways such as small residue granule and highly fine grinding are used. Finally, the weight of industrial waste residue expands so percent in cement finishedproduct and the quality grade of fly ash cement could reach to 42.5.通过采用“一高两中”配料方案设计、废渣生料小料球成型及煅烧、高细粉磨等技术手段,综合利用粉煤灰、煤矸石、电厂炉渣、硫酸渣、磷石膏五种工业固体废弃物生产粉煤灰水泥,使最终水泥实物重量中工业废渣含量达到50%,粉煤灰水泥质量等级达到42.5级《水泥工程》2010-3Study on several representative cement grinding systemThe cement grinding system has developed form early ball mill system to newly ball mill+roller press system and vertical mill system gradually.By analysis of flow,main configuration and run parameters,the technical characters of several representative cement grinding system were summarized. The results show that the vertical mill finishing system has the simplest flow and lowest energy consumption which is the preferred cement plan ,and the flow and energy consumption of the combined grinding system of roller press+ball mill (with whirling fluid separator) and the combined grinding system of vertical mill+ball mill is similar which can be the following preferred plan,and the open circuit and semi-open circuit grinding system of roller press+ball mill have the most disadvantage which should be selected never.几种典型水泥粉磨系统的比较水泥粉磨系统已由早先的球磨机系统逐步发展到现在的球磨机+辊压机系统和立磨系统。
通过分析流程和主要配置及运行参数，归类出比较典型的七种水泥粉磨系统的技术性能特点。
其中，立磨终粉磨系统流程最简单，能耗最低，是水泥粉磨方案的首选；辊压机+球磨（带涡流选粉机）组成的联合粉磨系统及立磨和球磨组成的联合粉磨系统流程相近，能耗相近，可作为水泥粉磨系统的优选方案；辊压机和球磨机组成的开流及半开流系统缺点最多，应尽量避免选用。
Investigation of the influence of modulus on free CaO and sintering of cement clinkerBase on the practical production modulus of KH=0.92 ,SM=2.58,IM=1.75,one of the modulus changed ,three test specimens were made by raw meal,clay and some adjusting material,and the test clinker was made by firing the specimens at 1400℃ for 40 min.Influence of modulus on free CaO and sintering of the three group of clinker was investigated contrastively.The analysis results showed that KH and SM’s influence on the free CaO and sintering of the clinker is more than that of IM and with KH and SM increasing,the clinker sintering decreased and the free CaO content rised.率值对熟料烧结和氧化钙结合程度的影响研究以实际生产率值KH=0.92,SM=2.58,IM=1.75为基础，用生产线生料、黏土和调整组分，分别变化其中一个率值制作了三组试件，并经实验电炉1400℃烧制40min而形成水泥熟料。