7.12中涉及的关于产品安全操作的说明, 需要整理归总在 说明书的前面部分. 其中大写字母的高度不得小于4mm. 安全说明还需要有一个备选格式存在, 比如网络版.
12
Clause 7.14: The height of symbol IEC 60417-5041 shall be at least 12 mm
11.Z102,barbecues, 棉花糖, 爆玉 米锅, 在额定功率下和正常工作条件下工作. 下面几个地方可以不用考 虑. 1. 在热功能面之外25mm可以不用测 2. 通风口之外25mm可以不用测. 3. 试验棒41碰不到的地方可以不测.
11.Z103:
2
Main addition or Modification of A13
1. Scope (Clause 1) 2. Definition (Clause 3) 3. Marking and Instructions (Clause 7) 4. Protection against to live parts (Clause 8) 5. Heating (Clause 11) 6. Mechanical hazards (Clause 21) 7. Construction (Clause 22)
11.Z105:
烘烤器在额定功率下和正常工作条件下工作, 下面几个地方可以不用 考虑. 1. 盖子不用测 2. 盖子边缘之外25mm可以不用测 3. 通风口之外25mm可以不用测. 4. 试验棒41碰不到的地方可以不测.
Table Z101
Clause 11.8(Delete the addition In A12 )
EN 60335-2-9/A13:2010 Household and similar electrical appliances – Safety –
Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
1. 烤箱, 旋转烤架, 电转烤肉架, 蒸(煮)机, 用 11.Z101考核; 2. 三明治炉, 华夫炉,发光烤架, 煎饼浅锅,barbecues, 棉花糖, 爆玉米
锅, 用 11.Z102考核; 3. 面包机和食物脱水器,用 11.Z103考核; 4. 多士炉, 用 11.Z104考核; 5. 烘烤器,用 11.Z105考核. 温升不能超过Table Z101 里规定的限值.
面包机和食物脱水器, 在额定功率下和正常工作条件下工作. 下面几个 地方可以不用考虑. 1. 盖子边缘之外25mm可以不用测 2. 通风口之外25mm可以不用测. 3. 底面上试验棒41碰不到的地方可以不测.
11.Z104:
多士炉在额定功率下和正常工作条件下工作3个周期,. 下面几个地方 可以不用考虑. 1. 如果是上表面加负载, 在上表面向下25mm和top side,可以不测 2. 热功能面之外25mm可以不用测 3. 通风口之外25mm可以不用测. 4. 试验棒41碰不到的地方可以不测.
Clause 20.2:
Addition: Appliances are fully assembled as in normal operation without any parts removed. Replace the first paragraph of compliance by: Compliance is checked by inspection, by the tests of 21.1 and by means of: – a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non circular face, applied with a force of 5 N and – test probe 18 of IEC 61032, applied with a force of 2,5 N.
11
Clause 7.12. Z101:
The specific instructions related to the safe operation of this appliance (as given in 7.12 of this standard) shall be collated together in the front section of the user instructions. The height of the characters, measured on the capital letters, shall be at least 4 mm. These instructions shall also be available in an alternative format, e.g. on a website.
根据标准规定需要测的可触及表面的温度如果是高于限 值(Table Z101)到限值2陪之间的要标: CAUTION: Hot surface. or 符号: .Symbol 5041. 警告句或者标志要放在器具表面 温度最高点, 而且在正常使用中要能方便看到的地方.
Clause 7.10:
Addition: Devices used to start/ stop operational functions of the appliance, if any, shall be distinguished from other manual devices by means of shape, or surface texture, or position, etc. A tactile or an audible and visual feedback shall give an indication that the device has been operated.
and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are old than 8 and supervised.
Clause 8.1.1:
However when using test probe 18 the appliance shall be fully assembled as in normal operation without any parts removed; parts that are intended to be removed for user maintenance shall not be removed.
2. keep the appliance and its cord out of reach of children less than 8 years.
Clause 7.12: 在说明书中要加入警告语句: 1. 8岁以上的小孩和 哪些身体上有缺陷的人或者缺少知
识需要在监督下, 或者使用说明书指导下,确保安全后 使用. 2. 器具和它的电源线应放在8岁以下小孩拉不到的地方
Jason Yang - March 2011 Intertek C&E HANGZHOU Testing everywhere for markets anywhere.
1
DOP and DOW for EN 60335-29/A13:2010 开始执行日期(DOP)：2011年10月1日 原标准作废日期(DOW)：2013年10月1日
删除11.8中A12里增加的内容
Clause 11.8 of A12 (Replaced by A13 ):
(Replaced by A13 ):
(Replaced by A13 ):
(Replaced by A13 ):
EN 60335-1: Clause 22.13: 器具在正常工作中, 使用手柄/把手时,可能会碰到的 地方的温度不能超过 table 3对手柄温升的限制值
器具的Start/ stop 功能键, 如果有的话,需要明显区别其他 按钮, 从形状/ 尺寸/ 质地纹理 让人能明显感觉到这个功能键是否处于工作状态.
9
Clause 7.12:
Addition: 1. This appliance can be used by children aged from 8 years and above
Clause 1: Scope
标准尽可能根据实际情况, 考虑了消费者在家用或者相似环境里使用 器具可能发生的普通危险情况. 但不考虑………
Clause 3: Definitions
Clause 7.1:
Addition: When the provisions of footnote b to Table Z101 apply, the appliance shall be marked with: Symbol IEC 60417-5041 or the substance of “CAUTION: Hot surface” . The warning shall be put on the surface of the appliance having the highest temperature and shall be visible during normal operation.