Forms a barrier between the steel substrate and
ZP
the corrosive environment. It is preferentially
Zinc Dichromate** attacked, forming sacrificial anodes in the circuit
5304 T5304
page 18
KLIPRING® EXTERNAL
METRIC CIRCLIPS
DIN 6799
D1500
page 19 METRIC “E”
EXTERNAL
DIN 471
D1400
pages 20 - 21 METRIC
EXTERNAL
DIN 472
D1300
pages 22 - 23 METRIC
not as toxic as Cadmium, it is not recommended for use
where prolonged contact with foodstuffs is involved.
Z
ZB
ZF
ZD ZD
ZD
*Bright finish rings are clear passivated to improve resistance to finger stains and normal darkening during storage. **Dichromate is a post-plating process, improving corrosion resistance and restricting the formation of “white rust” on Zinc plated surfaces under humid conditions. It has a yellowing effect on the finish.
DUTY PUSH-ON DUTY GRIP RING
EXTERNAL
EXTERNAL
1500
page 16
E-RING EXTERNAL
1540
page 16
REINFORCED E-RING EXTERNAL
1800
page 17
C-RING EXTERNAL
WA/AAR
page 17 CRIMP RING
PLAIN WIRE RING
3200
page 25
XRC-XRO
page 26
BEARING SNAP ROUND SECTION
RING
EXTERNAL
XSC-XSO
page 27
SQUARE SECTION EXTERNAL
page 28
SPIRAL RINGS
TRC
page 28
RECTANGULAR SECTION
temperatures for rings: 1000°F
1501, 1540, 1800 all sizes
(850°F under severe stress).
Other series & sizes on application
H SS2 SS2
Beryllium Copper*
Alloy 25
DIN 472 471
6799 M1465
ROTOR CLIP HO SH HOI SHI SHR SHM RE E C LC PO POL BE BHO BSH VHO VSH SHF TX TY
not offered not offered
TI
MILITARY STANDARD MS16625** MS16624** MS16627** MS16626** MS 3217**
Finish
Suitability
Interchangeability Code
Anderton Truarc IRR Rotor Clip
Phosphate
Zinc-based coating sealed with lanolin-based oil.
Provides added shelf-life plus a measure of
EXTERNAL
EN page 29
EXTERNAL NOTCHED RINGS
XAN pages 30 - 31
EXTERNAL RETAINING
RINGS
pages 32 - 33
EXTERNAL RETAINING
RINGS
NAN pages 34 - 35
INTERNAL RETAINING
— MS 3215** MS16633** MS16632** MS90708**
— — MS16634** MS16629** MS16628** MS16631** MS16630** MS90707** — — — — —
ROTOR CLIP DHO DSH DE DTX
SEEGER J A RA ZA
S
S
ST
ST
Stainless Steel*
PH 15-7 Mo (Armco)
N1300 sizes 25 thru 150
Precipitation hardened.
1308 sizes 75 thru 150
Withstands all dilute non-acidic
1400 sizes 25 thru 200
chemicals. The most effective
1408 sizes 50 thru 200
AS
material for long term resistance 1440 all sizes
to industrial atmospheres.
1460 sizes 39 thru 66
Maximum recommended operating 1500 all sizes except 4
BC
marine applications.
1440 all sizes
Maximum recommended operating 1460 sizes 39 thru 66
temperatures for rings: 660°F for 1500, 1501, 1540, 1800 all sizes
limited period of time.
Other series & sizes on application
C
BC
BC
*Not all sizes in Stainless Steel and Beryllium Copper in stock — inquire for availability.
ZD
made by its contact with the steel. Superior to
Cadmium in general industrial use and considerably
less expensive. Should not be used in conjunction
with alkaline solutions, hot water or steam. Though
protection in corrosive environments. Used as the
PP
standard finish for several PP series of rings.
Coating weight iPP PA
PA
Bright Zinc*
RINGS
pages 38 - 39
INTERNAL RETAINING RINGS
(METRIC)
ND page 40
INTERNAL RETAINING
RINGS
pages 44 - 45
SPRINGS/ MISC
ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service
N1300 sizes 25 thru 150
Precipitation hardened.
1308 sizes 75 thru 150
Poor resistance to industrial
1400 sizes 12 thru 200
atmospheres but widely used in
1408 sizes 50 thru 200
eg:MS 16625 -1025=1300-25 CD (Carbon Steel, Cadmium Dichromate) (We no longer supply) 2025=1300-25 ZD (Carbon Steel, Zinc Dichromate) 3025=1300-25 PP (Carbon Steel, Standard Phosphate) 4025=1300-25 AS (Stainless Steel, Passivate) 5025=1300-25 C (Beryllium Copper)
INTERNAL
ARCON
AR ON 2
ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service
Wire / Specialty Rings - CONTENTS
1000
page 24
ROUND SECTION
1200
page 24
ARCON
ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service