Set parameters to adjust status, the corresponding parameters with '[]' logo Save command parameters or perform an action (or code address code parameter reset)
CONFIRM long press
ቤተ መጻሕፍቲ ባይዱPress the CONFIRM button for more than 1.5 seconds after release
Save command parameters or perform an action (or code address code parameter
DOWN long press
Press the DOWN button for more than 1.5 seconds after release
Mode 4 on the adjustment of status to switch modes; parameter adjustment
parameters for the current state of minus 4 Mode switch to the next mode to adjust status; parameter adjustment parameters for the current state plus 1
Three, the controller's main function conversion table
Four, the product prompts Description After power is turned on, prompting the host content, the program will display customer specific code; boot automatically after two seconds to set a good start into working mode.
Two, the key switch corresponding to the menu [left to right four switches were FUNCTION CONFIRM DOWN UP]: Action Name
FUNCTION short press
Methods of operation
�
Product features:
� � � � � � � � � � �
DMX signal output line DMX512/1990 standard. With standard DMX512 output 170 full-color point control signal. Interior lighting with more than 64 fixed-effects model. Combination of internal definition of the program combined fixed-effects model can perform. Definition of the steps listed within the definition of mode. There are two modes within the definition of voice. Effects of various changes in the rate of change selected independent set. With LCD output indicator, all functions are operating tips on the LCD. With four action buttons, can facilitate functions. A wireless remote control can operate remote debugging and change. DMX address with editing functions, easy to address changes.
\
Five, the product demonstration luminous efficiency function description 1, this function is used to output DMX512 control signal, the output of various light effects set a good presentation capabilities. 2, this function automatically after power prompts to set a good light efficiency presentation capabilities. 3, this function interface description:
Press the FUNCTION button for more than 1.5 seconds after release
Switch to the next main menu
CONFIRM short press
Press the CONFIRM button within 1.5 seconds after release
4,Light effects demo menu: Function Luminous efficiency Number function name display shows
#00 #01 #02 #03 #04 #05 #06 #07 #08 #09 #10 #11 #12 #13 #14 #15 #16 #17 ... #20 #21 #22 LEAP MOVE 3C> LEAP MOVE 3C< LEAP STEP 3C> [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level [RGB]Tricolor Right Move [RGB]Tricolor Left Move [RGB]Tricolor Right Step STATIC COLOR ALL LAMP No parameters STATIC COLOR RED STATIC COLOR GREEN STATIC COLOR YELLOW STATIC COLOR BLUE STATIC COLOR PURPLR STATIC COLOR CYAN STATIC COLOR WHITE STATIC MMIX00 STATIC MMIX01 STATIC MMIX02 FLASH WHITE CHANGE LEAP3C CHANGE FADE3C BREATHE 3C CHANGE LEAP7C CHANGE FADE7C BREATHE 7C [B:XXX]Brightness can be adjusted to [0-255] level [B:XXX]Brightness can be adjusted to [0-255] level [B:XXX]Brightness can be adjusted to [0-255] level [B:XXX]Brightness can be adjusted to [0-255] level [B:XXX]Brightness can be adjusted to [0-255] level [B:XXX]Brightness can be adjusted to [0-255] level [B:XXX]Brightness can be adjusted to [0-255] level [R:XX G:XX B:XX]RGB brightness can be adjusted [R:XX G:XX B:XX]RGB brightness can be adjusted [R:XX G:XX B:XX]RGB brightness can be adjusted N:XX light time;M:XX Off time;F:XX Flashing mode [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level [S:XXX]Speed can be adjusted to [0-63] level
specifications Battery compatibility Green Environment protecting Other MTBF Dimensions, weight Accessories Packaging, labeling Wiring Diagram Remarks
1, the interface supports standard DMX control output, also support the company's all DMX decoder configuration and write address code. 2, the output can access 32PCS DMX decoder modules, up to 300m long access to dual-core shielded cable. 3, to provide safety isolation from the ADAPTER.