当前位置:文档之家› 阀门样本

阀门样本

一、调节阀系列First、series regulating valve1、型号编制说明The model description:P普通型M密闭型P Normal type M Airtight typeD电动Q气动S手动D Motor-driven Q Pneumatic S Manual风阀高度H Air valve height H风阀宽度W Air valve widthW1 工作温度为-40℃~95℃2工作温度为-55℃~205℃1 the operating temperature -40℃~95℃2 theoperating temperature55℃~205℃D对开式P平行式D Vis-a-vis type P Parallel type创元风量调节阀chuangyuan air volume regulating valve 1.1、型号示例model sample1:CYTD2-1000×500SP 表示创元普通型对开式多叶调节阀,工作温度为-55℃~205℃,宽1000mm,高500mmCYTD2-1000×500SP is Chuangyuan normal vis-a-vis multi-blade regulating valve, the working temperature is -55℃~ 205℃, width is 1000mm, the height is 500mm2、风量调节阀技术参数Air volume regulating valve technical parameters:2.1、风量调节阀框体和叶片采用镀锌钢板制成,无焊点,表面无需涂装;Air volume regulating valve frame and blade made by galvanized steel plates, no weld, the surface doesn’t need paint.2.2、风阀轴承材料为烧结青铜含油轴承,可以耐300℃的高温;The regulating valve bearing material is sintered bronze oiled bearings, can resist high temperature 300℃;2.3、叶片由10×10方形轴连接,轴的材料为45#镀锌钢;Blades are connected by 10×10 square shaft, the material of the bearing is 45# galvanized steel plates 2.4、根据需要可选配可调节风量的执行机构;We can provide implement facility which can regulating the air volume by need.2.5、普通型阀体厚度标准尺寸L=210mm,密闭型阀体厚度标准尺寸L=180mm,也可根据客户需要生产各种特型尺寸;The standard thickness of the normal valve dimension is L=210, the standard thickness of the airtight valve dimension is L=180, customers may also choose a variety of special type size;2.6、风量调节阀的法兰宽度为30mm、40mm,客户可以根据需要选择;The width of the air regulating valve flange is 30mm、40mm,the user can make choice.2.7、密闭阀密封材料为橡胶。

The seal material of the airtight valve is rubber.3、风量调节阀分类以及特点The air volume regulating valve classification and characteristics:3.1、分为普通型风量调节阀、密闭型风量调节阀。

每种又有对开与平行式两种类型以及手动、气动、电动三种驱动方式;The air control valve is divided into normal air volume regulating valve、airtight air volume regulating valve. Each of them has two types, Off-style and parallel style, and they have three driven ways: manual, pneumatic, electric, manual;对开式与平行式选用的一般原则General selection principles of off-style and parallel:(a)当阀门所需调节的管段阻力大,而阀门消耗的阻力小时宜选用对开式,反之则应选用平行式;When tube resistance is big but the valve consumes small resistance, it is better to choose off-type on the contrary should choose parallel;(b)对开式的起始调节性能优于平行式;The off-type regulation is better than parallel style;(c)一般做开关用的风阀宜选用平行式;If the valve used as switch the parallel should be chosen;(d)当安装在两个系统的混合处时,宜选用相同特性的调节阀,且宜为对开式;When the valve installed in the mixture place of the two systems, it is better to choose the same characteristics valve, and off-type is better;(e) 对气流噪声有严格要求的系统宜选配平行式;There are strict requirements on the aerodynamic noise matching system, parallel way should be selected;(客户可根据需要选择相应的方式。

)(Customers can select the appropriate way.)3.2、风量调节阀的特点air volume regulating valve features:(a)风量调节阀的传动方式为连杆传动;Drive transmission mode of the air volume regulating valve is the connecting rods way;(b)普通型调节阀的漏风率不大与2%,密闭型调节阀的漏风率不大与0.5%;The leakage rate of the normal air volume regulating valve is no less than 2%, the leakage rate of the airtight air volume regulating valve is no less than 0.5%;(c)手动和电(气)动阀门一般为顺时针方向关闭,逆时针方向开启;M anual and electric (pneumatic) valve is generally clockwise, counterclockwise op en;3.3、风量调节阀的结构尺寸The air volume regulating valve overall dimension3.3.1、普通型风量调节阀Normal air volume regulating valve结构尺寸the structure dimension:备注:(Note)(1)以上“√”尺寸为常用尺寸,也可根据客户需要生产各种特型尺寸。

(当W尺寸≥1250时,加中间框,叶片分隔。

)Note: The above "√" size is commonly used, but we can also produce various special sizes. (When W size ≥ 1250, add the middle frame, blades separated.)(2)L尺寸为210mm。

The dimension L is 210mm。

3.3.2、密闭型风量调节阀Airtight air volume regulating valve结构尺寸the structure dimension :备注:(Note )(1)以上“√”尺寸为常用尺寸,也可根据客户需要生产各种特型尺寸。

(当W 尺寸≥1250时,加中间框,叶片分隔。

)The above "√" size is commonly used, but we can also produce various special sizes. (When W size ≥ 1250, add the middle frame, blades separated.) (2)L 尺寸为180mm 。

The dimension L is180mm 。

二、防火、排烟阀门Fire、smoke damper1、型号编制说明The model description:风阀高度H Valve height H风阀长度W(圆形阀门以Φ表示)Valve length W(Φ is the sign of circular valve)功能Function控制方式Control way产品名称Product Name1.1、产品名称 the product name :FHF:防火阀;PHFH:排烟防火阀;PYF:排烟阀;PYK:排烟口fire damper PHFH: fire & smoke damper; PYF:smoke exhaust valve ;PYK:smoke exhaust outlet 1.2、控制方式Control way:W:熔断器控制自动关闭;Fuse control automatically turns off;S:手动控制关闭或开启;Manual control closed or open;D:电动控制关闭或开启;Electric control closed or open;Dc:电控电磁铁关闭或开启;Electric solenoid closed or open;Di:电控电机关闭或开启;Electric motor turned on or off;Dq:电控气动机构关闭或开启;Electronically controlled pneumatic facility to close or open;注意:排烟阀没有熔断器控制方式;Note: The smoke exhaust valve does n’t have fuse control;1.3功能 Function:F:具有风量调节功能;With air volume regulating functionY:具有远距离复位功能;With remote reset functionK:具有阀门关闭或开启后阀门位置信号反馈功能;With the position signal feedback function after the valve closed or open valve;注意:排烟防火阀和排烟阀不要求风量调节功能;Note: The smoke &fire damper and smoke exhaust valves do not require air volume control function;1.4型号示例model sample:FHF WS-FK-500×500表示防火阀;具有温感控制功能;手动控制功能;具有风量调节功能;具有信号反馈功能;阀体有效长度为500mm,有效高度为500mm。

相关主题