JIS Z2280-1993
高温下金属材料的扬式模量试验方法
Test method for Young's modulus of metallic materials at elevated temperature
JIS Z2281-1993
金属材料在高温下连续氧化试验的试验方法
Test method for continuous oxidation test at elevated temperatures for metallic materials
Measuring method of coefficient of linear thermal expansion of metallic materials
JIS Z2286-2003
金属材料高温旋转弯曲疲劳试验方法
Method for high temperature rotating bending fatigue testing of metallic materials
JIS Z2293-2004
熔盐中浸入和嵌入的金属材料的高温腐蚀试验方法
Methods for high-temperature corrosion test of metallic materials by dipping and embedding in molten salts
JIS Z2294-2004
JIS G0564-1999
金属材料.平面应变断裂强度的测定
Metallic materials -- Determination of plane-strain fracture toughness
JIS H0321-1973
有色金属材料检查的通用规则
General rules for inspection of non-ferrous metal materials
JIS Z2550-2000
烧结金属材料.规范
Sintered metal materials -- Specification
JIS Z2611-1977
金属材料光电发射光谱化学分析的通用规则
金属材料の光電測光法による発光分光分析方法通則
General rules for photoelectric emission spectrochemical analysis of metal materials
General rule of ultrasonic testing of metals by pulse echo technique
JIS Z2501-2000
烧结金属材料.密度、油含量和开口孔隙率的测定
Sintered metal materials -- Determination of density, oil content, and open porosity
JIS H0505-1975
有色金属材料的电阻率及导电率测量方法
Measuring methods for electrical resistivity and conductivity of non-ferrous materials
JIS H7503-2003
超塑变形金属材料孔穴体积比值的测量方法
JIS C0066-2001
暴露于火源时固体非金属材料的可燃性.试验方法列表
Flammability of solid non-metallic materials when exposed to flame sources -- List of test methods
JIS C2531-1999
JIS Z2282-1996
金属材料在高温下循环氧化试验方法
Method of cyclic oxidation testing at elevated temperatures for metallic materials
JIS Z2283-1998
液氦中金属材料的低周期疲劳试验方法
Method of low cycle fatigue testing for metallic materials in liquid helium
金属材料疲劳试验方法的通则
General rules for fatigue testing of metals
JIS Z2274-1978
金属材料回转弯曲疲劳试验方法
Method of rotating bending fatigue testing of metals
JIS Z2276-2000
JIS Z2614-1990
金属材料中氢测定的通用规则
General rules for determination of hydrogen in metallic materials
JIS Z2615 AMD 1-2006
金属材料中碳的测定通则（修改件1)
General rules for determination of carbon in metallic materials (Amendment 1)
日本
编号
中文名称
英文名称
JIS B7739-1989
非金属材料用摆锤式冲击试验机
Pendulum-type impact testing machines for non-metallic materials
JIS B7755-1993
金属材料用冲击试验机械.仪器
Impact testing machines for metallic materials -- Instrumentation
Method for measurement of cavity volume fraction of superplastically deformed metallic materials
JIS T6002-2005
牙科用金属材料.抗腐蚀性试验方法
Dental metallic materials -- Corrosion test methods
JIS Z2615-1996
金属材料中碳的测定通则
General rules for determination of carbon in metallic materials
JIS Z2616 AMD 1-2006
金属材料中硫的测定通则(修改件1)
General rules for determination of sulfur in metallic materials (Amendment 1)
JIS Z2284-1998
液氦中金属材料的弹塑性断裂韧度的Jic测试方法
Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium
JIS Z2285-2003
金属材料线性热膨胀系数的测量方法
JIS Z2241-1998
金属材料拉伸试验方法
Method of tensile test for metallic materials
JIS Z2242-2005
金属材料的摆式冲击试验方法
Method for Charpy pendulum impact test of metallic materials
镊铁软磁金属材料
Nickel iron soft magnetic metallic materials
JIS C60695-10-2-2000
着火危险试验.第10部分:将火中电工产品不正常热的效应减至最小的指南和试验方法.第2节:使用球压试验的非金
Fire hazard testing Part 10: Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires -- Section 2: Method for testing products made from non-metallic materials for resistance to heat using the ball pressure test
金属材料中氧含量测定的一般规则(修改件1)
General rules for determination of oxygen in metallic materials (Amendment 1)
JIS Z2613-1992
金属材料中氧含量测定总则
General rules for determination of oxygen in metallic materials
JIS T6123-2005
固定牙齿修复用义齿基托金属材料
Base metal materials for fixed dental restorations
JIS Z2201-1998
金属材料抗拉试验用试样
Test pieces for tensile test for metallic materials
JIS Z2248-2006
金属材料.弯曲试验
Metallic materials -- Bend test
JIS Z2271-1999
金属材料蠕变和蠕变断裂试验方法
Method of creep and creep rupture test for metallic materials
JIS Z2273-1978
JIS Z2278-1992
金属材料的热疲劳试验方法
Method of thermal fatigue testing for metallic materials