Magic Box Specification
step1
wall bracket
step2
square stainless steel cover
step3
The finished shower head is closed to the wall,and sliding down into the fixed plate.
step7
screw
27MM 1.8M～2.2M left port
floor floor
Prize up the square stainless Lock the bracket to the wall tightly by screw. steel cover along the end of the magic box. Sliding down the finished magic box into the fixed plate as the view until the fixed plate through the square groove.
step4
C loop
step5
square stainless steel cover
step6
shower will be fixed into the flushing port. 2.As the view,insert the magic hand shower into the left port. When turn on the faucet,water flow into the left port , and the waterfall will outflow from the flushing port; Then turn off the
Aim the square stainless steel cover Hook the hole in the fixed plate by C loop after the magic box was installed into the wall,in case of falling off. to the back of the magic box,and press the edge of cover until flatted.
right port
ቤተ መጻሕፍቲ ባይዱ
↑
magic shower
Instruction:
1.Insert the magic shower with hose into the end of the flushing port of magic box. The magnet on the top of the magic box can suction the magnet on the top of the magic shower. So that the magic
↑
flange
hose
faucet,insert the magic shower into the right port,then turn on faucet,water flow into the right flushing port,and the saturating will outflow. 3.When saturating outflow,turn off the faucet,pull out the magic shower from the magic box,then turn on faucet,the magic shower
Slip the flange into the magic box following the arrowhead direction, until the subface flatted. constant temperature faucet.
can be used alone. After finishing the bath,turn off the faucet,and fix the magic shower into the flushing port of magic box.