TS16949来料检验作业指导书Incoming_Inspection_Work_Instruction
文件更改历史记录
Amendment History
版次Revision
更改日期
Change Date
更改概要
Description of Changes
更改人
Prepared by
批准人
Approved by
Prepared by编制Reviewed by审核Approved by批准
TS16949来料检验作业指导书
Incoming_Inspection_Work_Instruction
1.0Purpose目的
The objective of this procedure is to define a standard inspection method in performing inspection and testing of components or materials.
本程序目的在于定义对元件或材料进行检验/测试的标准操作方法。

Scope适用范围
This procedure is applicable to all components and materials that require the relevant inspection and testing, as specified in the individual Part or Material Specification.
本程序适用于所有按照元件和材料规格进行检验和测试的元件和材料。

2.0Sampling / Equipment Used 取样 / 使用设备
2.1Per sampling plan stated in the Incoming Inspection Procedure: AQL：
MA=0.4、MI=1.0
按照来料检验程序所规定的抽样计划；AQL:MA=0.4、MI=1.0级别进行抽样.
2.2Inspection Aids检验工具
4.2.1 LCR Meter / LCR 测量仪
4.2.2 Fluke Multimeter / Fluke 万用表
4.2.3 Caliper / Plug Gauge / Pin Gauge / 游标卡尺/ 塞规/针规
4.2.4 Magnifier / Microscope / 放大镜 / 显微镜
3.0Reference Documents参考文件
3.1 Customer’s AVL / 客户接受的供应商清单
3.2 Manufacturer Part Specification / 供应商的元件规格。