法国金属材料和非金属材料标准(NF metallic material and nonmetallic material standards)ANSI|BS|DIN|EN|GB|ISO|JIS|NF|DIC 编号中文名称英文名称NF A03-001-2001 金属材料.拉伸试验.第1部分:常温试验方法(Metallic materials -Tensile testing - Part 1 :method of test at ambienttemperature.)NF A03-002-1999 金属材料.静态单轴向试验机的验正.第1部分:拉伸/压缩试验机(Metallic materials -Verification of staticuniaxial testing machines -Part 1 :tension/compression testingmachines.)NF A03-003-2002 金属材料.用于验证单轴向试验机的作用力检验仪的校准(Metallic materials -Calibration of force-proving instruments usedfor the verification ofuniaxial testing machines.)NF A03-004-2003 金属材料.单轴向试验用伸长计的校准(Metallic materials -calibration ofextensometers used inuniaxial testing.)NF A03-011-1990 金属材料.摆锤式冲击试验.第1部分:试验方法(Metallic materials. Charpyimpact test. Part 1 : testmethod.)NF A03-012-1992 金属材料.夏比冲击试验.第2部分:试验机的检定(冲击摆).(欧洲标准EN10045-2)(Metallic materials. Charpyimpact test. Part 2 :verification of the testingmachine (pendulumimpact).)NF A03-021-1994 金属材料.硬度试验.第1部分:洛氏表面硬度试验.(15N、30N、45N、15T、30T和45T刻度)(METALLICMATERIALS.HARDNESS TEST. PART1 : ROCKWELL TEST(SCALES A, B, C, D, E, F,G, H, K) ANDROCKWELLSUPERFICIAL TEST(SCALES 15N, 30N, 45N,15T, 30T AND 45T).(EUROPEANSTANDARD EN 10109-1).)NF A03-031-1994 金属材料.布氏硬度试验.第1部分:试验方法(ISO6506-81)(METALLICMATERIALS. BRINELLHARDNESS TEST. PART1 : TEST METHOD.(EUROPEANSTANDARD EN 10003-1).)NF A03-091-1994 金属材料.管材(全截面).弯曲试验(Metallic materials. Tube(in full section). Bend test.)NF A03-093-1994 金属材料.管.拉力试验(Metallic materials. Tube. Drift expanding test.)NF A03-096-1994 金属材料.管材.环形拉伸试验(METALLICMATERIALS. TUBE.RING TENSILE TEST.(EUROPEANSTANDARD EN 10237).)NF A03-152-2-1999 金属材料.布氏硬度试验.第2部分:试验机的验证和校正(Metallic materials. Brinellhardness test. Part 2 :verification and calibrationof testing machines.)NF A03-152-3-1999 金属材料.布氏硬度试验.第3部分:标准试块的校正(Metallic materials. Brinellhardness test. Part 3 :calibration of referenceblocks.)NF A03-153-2-1999 金属材料.洛氏硬度试验.第2部分:试验机(刻度A,B, C, D, E, F, G, H, K, N,T)的验证和校正(Metallic materials.Rockwell hardness test.Part 2 : verification andcalibration of testingmachines (scales A, B, C,D, E, F, G, H, K, N, T).)NF A03-153-3-1999 金属材料.洛氏硬度试验.第3部分:标准试块的校正(刻度A, B, C, D, E, F, G,H, K, N, T)(Metallic materials.Rockwell hardness test.Part 3 : calibration ofreference blocks (scales A,B, C, D, E, F, G, H, K, N,T).)NF A03-154-1-1998 金属材料.维氏硬度试验.第1部分:试验方法(Metallic materials.Vickers hardness test. Part1 : test method.)NF A03-154-2-1998 金属材料.维氏硬度试验.第2部分:试验机械的校准(Metallic materials.Vickers hardness test. Part2 : verification of testingmachines.)NF A03-154-3-1998 金属材料.维氏硬度试验.第3部分:标准块的校准(Metallic materials.Vickers hardness test. Part3 : calibration of referenceblocks.)NF A03-155-1-2003 金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法(Metallic materials -Instrumented indentationtest for hardness andmaterials parameters - Part1 : test method.)NF A03-155-2-2003 金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准(Metallic materials -Instrumented indentationtest for hardness andmaterials parameters - Part2 : verification andcalibration of testingmachines.)NF A03-155-3-2003 金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准(Metallic materials -Instrumented indentationtest for hardness andmaterials parameters - Part3 : calibration of referenceblocks.)NF A03-159-2000 金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验(Metallic materials - Sheetand strip 3 mm thick or less- Reverse bend test.)NF A03-356-1999金属材料(Metallic materials.)NF A03-652-2003 金属材料.薄板材和带材.埃里克森压凹试验(Metallic materials - Sheetand strip - Erichsencupping test.)NF A03-750-2000 金属材料.张力的单轴蠕变试验.试验方法(Metallic materials -Uniaxial creep testing intension - Method of test.)NF A03-760-1-2003 金属材料.拉伸应力松弛试验.第1部分:试验机规程(Metallic materials -Tensile stress relaxationtesting - Part 1 : procedurefor testing machines.)NF A05-411-2000 金属材料抗腐蚀性防护.大气环境中腐蚀的可能性.大气环境中腐蚀性的分类、确定和评价(Protection of metallicmaterials against corrosion- Corrosion likelihood inatmospheric environment -Classification,determination andestimation of corrosivity ofatmospheric environments.)NF A05-412-1-2003 金属材料的防腐.土壤腐蚀的可能性.第1部分:总则(Protection of metallicmaterials against corrosion- Corrosion likelihood insoil - Part 1 : general.)NF A05-412-2-2003 金属材料的防腐.土壤腐蚀的可能性.第2部分:低合金和非合金黑色金属材料(Protection of metallicmaterials against corrosion- Corrosion likelihood insoil - Part 2 : low alloyedand non alloyed ferrousmaterials.)NF A06-352-1995 黑色金属材料的化学分析.钢和铁中砷的测定.分光光度法(欧洲标准ENISO 10212)(Chemical analysis offerrous materials.Determination of arsenic insteel and iron.Spectrophotometricmethod.)NF A06-392-1-2000 黑色金属材料的化学分析.钢和铁中氧的测定.第1部分:取样和制备钢样品用于测定氧(Chemical analysis offerrous materials -Determination of oxygen insteel and iron - Part 1 :sampling and preparationof steel samples for oxygendetermination.)NF A08-328-1989 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法(Chemical analysis offerrous materials.Determination ofchromium in steels andirons. Flame atomicabsorption spectrometricmethod.)NF A09-201-1994 无损检验.用X和γ射线进行金属材料射线检查的一般原则(Non-destructive testing.General principles forradiographic examinationof metallic materials by X-and gamma rays.)NF A09-250-3-2002 无损检验.射线检验.第3部分:用X-射线和γ射线进行金属材料射线检验的一般原理(Non-destructive testing -Radioscopic testing - Part3 : general principles ofradioscopic testing ofmetallic materials by X-and gamma rays.)NF A49-865-1999 金属材料.重量损失磨损试验(欧洲标准EN 10274)(METALLICMATERIALS. DROPWEIGHT TEAR TEST.(EUROPEANSTANDARD EN 10274).)NF A49-866-1999 金属材料.管圈液压试验(METALLICMATERIALS. TUBERING HYDRAULICPRESSURE TEST.(EUROPEANSTANDARD EN 10275).)NF A50-110-8-2003 铝和铝合金.废料.第8部分:铝分离工艺中切碎工艺产生的有色金属材料组成的废料(Aluminium andaluminium alloys - Scrap -Part 8 : scrap consisting ofnon-ferrous materials fromshredding processesdestined to aluminiumseparation processes.)NF A80-230-1-1998 焊接和合金过程.金属材料几何缺陷的分类.第1部分:熔焊(欧洲标准6520-1)(Welding and alliedprocesses. Classification ofgeometric imperfections inmetallic materials. Part 1 :fusion welding.)NF A80-230-2-2003 焊接和相关工艺.金属材料中几何缺陷的分类.第2部分:带压焊接(Welding and alliedprocesses - Classificationof geometric imperfectionsin metallic materials - Part2 : welding with pressure.)NF A81-331-1984 焊接、硬钎焊和硬焊铝及铝合金用填充金属材料.符号.规范(Filler materials forwelding, brazing and brazewelding aluminium andaluminium alloys.Symbolization.Specifications.)NF A88-112-1998 焊接操作人员.焊接操作人员用金属材料全机械化和自动焊接用熔焊和阻焊装置验收试验(Welding personnel.Approval testing ofwelding operators forfusion welding andresistance weld setters forfully mechanized andautomatic welding ofmetallic materials.)NF A89-010-1-1992 金属材料焊接工艺与验收规范.第1部分:熔焊一般规则(欧洲标准EN 288-1)(Specification and approvalof welding procedures formetallic materials. Part 1 :general rules for fusionwelding.)NF A89-010-10-1996 金属材料焊接工艺的验收和规范.第10部分:电子束焊接工艺规范(SPECIFICATION ANDAPPROVAL OFWELDINGPROCEDURES FORMETALLICMATERIALS. PART 10 :WELDING PROCEDURESPECIFICATION FORELECTRON BEAMWELDING. (EUROPEANSTANDARD EN ISO9956-10).)NF A89-010-11-1996 金属材料焊接工艺的验收和规范.第11部分:激光束焊接工艺规范(SPECIFICATION ANDAPPROVAL OFWELDINGPROCEDURES FORMETALLICMATERIALS. PART 11 :WELDING PROCEDURESPECIFICATION FORLASER BEAMWELDING. (EUROPEANSTANDARD EN ISO9956-11).)NF A89-010-2-1992 金属材料焊接工艺与验收规范.第2部分:电弧焊焊接程序规范(欧洲标准EN288-2)(Specification and approvalof welding procedures formetallic materials. Part 2 :welding procedurespecification for arcwelding.)NF A89-010-3-1992 金属材料焊接工艺的验收和规范.第3部分:钢件电弧焊焊接工艺试验(欧洲标准EN 288-3)(Specification and approvalof welding procedures formetallic materials. Part 3 :welding procedure tests forthe arc welding of steels.)NF A89-010-5-1994 金属材料焊接程序的规范和认可.第5部分:使用批准的电弧焊焊条进行认可(Specification and approvalof welding procedures formetallic materials. Part 5 :approval by using approvedwelding consumables forarc welding.)NF A89-010-6-1994 金属材料焊接程序的规范和认可.第6部分:有关以前试验的认可(SPECIFICATION ANDAPPROVAL OFWELDINGPROCEDURES FORMETALLICMATERIALS. PART 6 :APPROVAL RELATEDTO PREVIOUSEXPERIENCE.(EUROPEANSTANDARD EN 288-6).)NF A89-010-7-1995 金属材料焊接程序的规范和认可.第七部分:使用电弧焊标准接程序进行认可(SPECIFICATION ANDAPPROVAL OFWELDINGPROCEDURES FORMETALLICMATERIALS. PART 7 :APPROVAL BY ASTANDARD WELDINGPROCEDURE FOR ARCWELDING. (EUROPEANSTANDARD EN 288-7).)NF A89-010-8-1995 金属材料焊接程序的规范和认可.第八部分:利用预生产焊接试验进行认可(SPECIFICATION ANDAPPROVAL OFWELDINGPROCEDURES FORMETALLICMATEIRALS. PART 8 :APPROVAL BY A PRE-PRODUCTIONWELDING TEST.(EUROPEANSTANDARD EN 288-8).)NF A89-052-2-2001 金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊(Specification andqualification of weldingprocedures for metallicmaterials - Weldingprocedure specification -Part 2 : gas welding.)NF A89-057-11-2002 金属材料焊接程序规范和鉴定.焊接程序试验.第11部分:电子和激光射线焊接(Specification andqualification of weldingprocedures for metallicmaterials - Weldingprocedure test - Part 11 :electron and laser beamwelding.)NF A89-057-8-2002 金属材料焊接程序规范和鉴定.焊接程序试验.第8部分:管对管-板接头的焊接(Specification andqualification of weldingprocedures for metallicmaterials - Weldingprocedure test - Part 8 :welding of tubes to tube-plate joints.)NF A89-101-1-1998 焊接.金属材料焊接推荐.第1部分:电弧焊接的一般指南(WELDING.RECOMMENDATIONSFOR WELDING OFMETALLICMATERIALS. PART 1 :GENERAL GUIDANCEFOR ARC WELDING.(EUROPEANSTANDARD EN 1011-1).)NF A89-101-1/A1-2002 焊接.金属材料焊接的推荐规范.第1部分:电弧焊接通用指南(Welding -Recommendations forwelding of metallicmaterials - Part 1 : generalguidance for arc welding.)NF A89-焊接.金属材料焊接的推(Welding - Recommendations for101-2-2002 荐规范.第2部分:铁素体钢的电弧焊welding of metallic materials - Part 2 : arc welding of ferritic steel.)NF A89-101-3-2000 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊(Welding -Recommendations forwelding of metallicmaterials - Part 3 : arcwelding of stainless steels.)NF A89-101-4-2000 焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊(Welding -Recommendations forwelding of metallicmaterials - Part 4 : arcwelding of aluminium andaluminium alloys.)NF A89-101-5-2003 焊接.金属材料焊接的推荐方法.第5部分:包层钢焊接(Welding -Recommendations forwelding of metallicmaterials - Part 5 : weldingof clad steel.)NF A89-204-2-1996 金属材料焊接的破坏试验.硬度试验.第2部分:焊接接缝的微硬度试验(欧洲标准EN 1043-2)(DESTRUCTIVE TESTSON WELDS INMETALLICMATERIALS.HARDNESS TEST. PART2 : MICRO HARDNESSTESTING ON WELDEDJOINTS. (EUROPEANSTANDARD EN 1043-2).)NF A89-210-1996 金属材料焊接的破坏试验.断裂试验.(欧洲标准EN1320)(DESTRUCTIVE TESTSON WELDS INMETALLICMATERIALS.FRACTURE TEST.(EUROPEANSTANDARD EN 1320).)NF A89-211-1996 金属材料焊接的破坏试验.焊接的低倍及显微检验(欧洲标准EN 1321)(DESTRUCTIVE TESTSON WELDS INMETALLICMATERIALS.MACROSCOPIC ANDMICROSCOPICEXAMINATION OFWELDS. (EUROPEANSTANDARD EN 1321).)NF A89-250-1-1994 焊接的质量要求.金属材料的熔焊.第1部分:选择和使用导则(Quality requirements forwelding. Fusion welding ofmetallic materials. Part 1 :guidelines for selection anduse.)NF A89-250-2-1994 焊接的质量要求.金属材料的熔焊.第2部分:全面质量系统(Quality requirements forwelding. Fusion welding ofmetallic materials. Part 2 :comprehensive qualityrequirements.)NF A89-250-3-1994 焊接的质量要求.金属材料的熔焊.第3部分:标准质量要求(Quality requirements forwelding. Fusion welding ofmetallic materials. Part 3 :standard qualityrequirements.)NF A89-250-4-1994 焊接的质量要求.金属材料的熔焊.第4部分:基本质量要求(Quality requirements forwelding. Fusion welding ofmetallic materials. Part 4 :elementary qualityrequirements.)NF A89-500-1997 焊缝的无损检验.金属材料用一般规则(Non-destructiveexamination of welds.General rules for metallicmaterials.)NF A89-500/A1-2003 焊接无损检验.金属材料的一般规则(Non-destructiveexamination of welds -General rules for metallicmaterials.)NF A89-573-2003 金属材料焊缝的有损检验.电阻点焊的扭转试验(Destructive tests on weldsin metallic materials -Torsion test of resistancespot welds.)NF A89-574-2003 金属材料焊接的无损检验.电阻焊接.电阻缝焊的压力试验(Destructive test on weldsin metallic materials -Resistance welding -Pressure test on resistanceseam welds.)NF A89-575-2003 金属材料焊接的无损检验.测量δ铁素体用的取样方法(Destructive tests on weldsin metallic materials -Method for taking samplesfor delta ferritemeasurement.)NF A89-600-1998 焊接.金属材料的弧双端螺栓焊接(欧洲标准ENISO 14555)(WELDING. ARC STUDWELDING OFMETALLICMATERIALS.(EUROPEANSTANDARD EN ISO14555).)(Welding - FrictionNF A89-601-2001 焊接.金属材料的摩擦焊接welding of metallicmaterials.)NF A91-474-2001 金属材料上的转化涂层.单位面积涂层质量的测定.重量分析法(Conversion coatings onmetallic materials -Determination of coatingmass per unit area -Gravimetric methods.)NF A95-301-1977 粉末冶金.硬金属除外的烧结金属材料.取样(POWDERMETALLURGY.SINTERED METALMATERIALSEXCLUDINGHARDMETALS.SAMPLING.)NF A95-311-1977 粉末冶金.透气烧结金属材料.密度和开气孔率的测定(POWDERMETALLURGY.PERMEABLE SINTEREDMETAL MATERIALS.DETERMINATION OFDENSITY AND OPENPOROSITY.)NF A95-322-2000 硬金属除外的烧结金属材料.拉伸试验块(Sintered metal materials,excluding hardmetals -Tensile test pieces.)NF A95-323/A1-2003 不包括硬质合金的烧结金属材料.横向断裂强度的测定.修改件1:精确说明(Sintered metal materials,excluding hardmetals -Determination of transverserupture strength -Amendment 1 : precisionstatement.)NF A95-326-1993 除硬金属外的烧结金属材料.无缺口试件(Sintered metal materials,excluding hardmetals.Unnotched impact testpiece.)NF A95-327-1986 粉末冶金.硬金属除外的烧结金属材料.疲劳试验用试件(Powder metallurgy.Sintered metal materialsexcluding hardmetals.Fatigue test pieces.)NF A95-329-1986 粉末冶金.硬金属除外的烧结金属材料.维氏显微硬度的测定(POWDERMETALLURGY.SINTERED METALMATERIALSEXCLUDINGHARDMETALS.MEASUREMENT OFVICKERSMICROHARDNESS.)NF A95-342-1985 粉末冶金.包括硬金属在内的烧结金属材料.显微照相检查技术(POWDERMETALLURGY.SINTERED MATERIALSINCLUDINGHARDMETALS.MICROGRAPHICEXAMINATIONTECHNIQUES.)NF A95-771-1-1988 烧结金属材料.规范.第1部分:用液体润滑剂浸渍的轴承材料(Sintered metal materials.Specifications. Part 1 :materials, for bearings,impregnated with liquidlubricant.)NF C20-907-2000 固体非金属材料暴露于引燃源的可燃性.试验方法清单(Flammability of solid nonmetallic materials whenexposed to flame sources -List of test methods.)NF E01-201-4-2003 压力设备.金属材料的技术交货条件的确立(Pressure equipment - Part4 : establishment oftechnical deliveryconditions for metallicmaterials.)NF E29-492-2002 工业阀门.金属材料的薄片阀(Industrial valves -Diaphragm valves made ofmetallic materials.)NF E29-648-1-1998 可运输储气瓶.储气瓶和阀门材料与气含量的相容性.第1部分:金属材料(Transportable gascylinders. Compatibility ofcylinder and valvematerials with gas contents.Part 1 : metallic materials.)NF E29-648-2-2001 可移动式液化气钢瓶.内有气体的钢瓶和阀材料的配合性.第2部分:非金属材料(Transportable gascylinders - Compatibility ofcylinder and valvematerials with gas contents- Part 2 : non-metallicmaterials.)NF L06-387-1991 航天结构用焊接和钎焊组装件.用电子束焊接金属材料组装件(Weldments andbrazements for aerospacestructures. Joints ofmetallic materials byelectron beam welding.Quality of weldments.)NF L06-航天结构用焊接和钎焊组装件.用扩散焊接法安装(WELDED ANDBRAZED ASSEMBLIESFOR AEROSPACECONSTRUCTION.ASSEMBLY OF391-1994 金属材料组装件.焊接组装件的质量METALLIC MATERIALS CARRIED OUT BY DIFFUSION WELDING. QUALITY OF WELDED ASSEMBLIES.)NF L06-394-1999 飞行器工业.航空与航天结构的焊接和钎焊. 用TIG方法的金属材料焊接组件.焊接质量(AIRCRAFT INDUSTRIE.WELDMENTS ANDBRAZEMENTS FORAEROSPACESTRUCTURES.ASSEMBLY OFMETALLIC MATERIALSWELDED BY TIGMETHOD. QUALITY OFWELDMENTS.)NF L06-850-2001 航空航天系列.非金属材料.设计产品.塑料粒子.技术规范(Aerospace series - Nonmetallic materials -Projecting products -Plastic particles - Technicalspecification.)NF L10-005-1-2002 航空航天系列.金属材料.第1部分:常规命名(Aerospace series -Metallic materials - Part 1 :conventional designation.)NF L10-006-2002 航空航天系列.金属材料.生产进度表、检验进度表、检验和试验报告.定义、一般原理、制备和验收(Aerospace series -Metallic materials -Manufacturing schedule,inspection schedule,inspection and test report -Definition, generalprinciples, preparation andapproval.)NF L10-015-2002 航空航天系列.金属材料.金属半成品产品尺寸标准的起草和说明规则(Aerospace series -Metallic materials - Rulesfor the drafting andpresentation of dimensionalstandards for metallic semi-finished products.)NF L10-020-1998 航空和航天系列.金属材料.一般结构和标准化.EN标准和其使用型之间的链接(Aerospace series. Metallicmaterials. Generalorganization ofstandardization. Linksbetween types of ENstandards and their use.)NF L10-100-1991 航空和航天系列.非金属材料分类用耐火性试验方法(Aerospace series. Testmethods for the flameresistance rating of non-metallic materials.)NF L17-005-1992 航空航天系列.非金属材料.优选试验温度(Aerospace series. Non-metallic materials.Preferred testtemperatures.)NF L17-015-2000 航空系列.非金属材料.质量计划的验收和评价及建立的规则(Aerospace series - Non-metallic materials - Rulesfor the establishement, theevolutions and theacceptance of qualityplans.)NF L17-020-1996 航空航天系列.非金属材料.液相色谱法特性(高性能液相色谱法.静挤压色层分离法).分类法(AEROSPACE SERIES.NON-METALLICMATERIALS. LIQUIDCHROMATOGRAPHYCHARACTERIZATION(HIGH PERFORMANCELIQUIDCHROMATOGRAPHY.STERIC EXCLUSIONCHROMATOGRAPHY).GENERALMETHODOLOGY.)NF L17-021-1998 航空航天系列.非金属材料.树脂,粘接剂,增强塑料,预浸渍.用液相色谱测定特性(AEROSPACE SERIES.NON-METALLICMATERIALS. RESINS,ADHESIVES,REINFORCEDPLASTICS,PREIMPREGNATES.CHARACTERISATIONBY LIQUIDCHROMATOGRAPHY.)NF L17-022-1999 航空航天系列.非金属材料.油类、液压油和燃料.液体层析法特征(AEROSPACE SERIES.NON-METALLICMATERIALS. OILS,HYDRAULIC FLUIDS,FUELS.CHARACTERISATIONBY LIQUIDCHROMATOGRAPHY.)NF L17-301-1998 航空航天系列.非金属材料.结构胶粘剂.试验方法.低漆厚度的测定(AEROSPACE SERIES.NON-METALLICMATERIALS.STRUCTURALADHESIVES. TESTMETHODS.DETERMINATION OFTHE PRIMERTHICKNESS.(EUROPEANSTANDARD EN 2781).)NF L17-310-6-2002 航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.第6部分:吸水性的测定(Aerospace series - Non-metallic materials -Foaming structuraladhesives - Test methods -Part 6 : determination ofwater absorption.)NF L19-003-1992 航空航天系列.元件和非金属材料中的管腔蜂窝状材料(AEROSPACE SERIES.HONEYCOMBMATERIALS WITHTUBULAR CELLS INCOMPONENT ANDNON-METALLICMATEIRALS.GENERALITIES.)NF L22-031-2003 紧固件.金属材料的选择(Fasteners - Selection of metallic materials.)NF S91-243-2002 牙科用金属材料.抗腐蚀试验方法(Dental metallic materials -Corrosion test methods.)NF S94-051-2000 外科植入物.金属材料.锻造不锈钢(Implants for surgery -Metallic materials -Wrought stainless steel.)NF S94-052-1997 外科用植入物.金属材料.第2部分:非金属钛(Implants for surgery.Metallic materials. Part 2 :unalloyed titanium.)NF S94-053-1997 外科植入物.金属材料.第12部分:锻造钴/铬/钼合金(Implants for surgery.Metallic materials. Part 12 :wrought cobalt-chromium-molybdenum alloy.)NF S94-054-1997 外科植入物.金属材料.第4部分:钴铬钼铸造合金(Implants for surgery.Metallic materials. Part 4 :cobalt-chromium-molybdenum castingalloy.)NF S94-055-1997 外科用植入物.金属材料.第5部分:锻制钴-铬-钨-镍合金(Implants for surgery.Metallic materials. Part 5 :wrought cobalt-chromium-tungsten-nickel alloy.)NF S94-056-1998 外科植入物.金属材料.第6部分:锻压的钴镍铬钼合金(Implants for surgery.Metallic materials. Part 6 :wrought cobalt-nickel-chromium-molybdenumalloy.)外科植入物.金属材料.可(Implants for surgery.Metallic materials.NF S94-057-1997 锻和冷成型钴铬镍钼铁合金Forgeable and cold-formedcobalt-chromium-nickel-molybdenum-iron alloy.)NF S94-058-1998 外科植入物.金属材料.第8部分:锻压的钴镍铬钼钨铁合金(Implants for surgery.Metallic materials. Part 8 :wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.)NF S94-059-1997 外科植入物.金属材料.可锻高氮不锈钢(Implants for surgery.Metallic materials.Wrought high nitrogenstainless steel.)NF S94-065-1998 外科植入物金属材料.基于磷酸钙包被的砷,汞,铬,铅含量的测定(Materials for surgicalimplants. Determination ofarsenic, mercury, cadmiumand lead on coatings basedon phosphate of calcium.)NF S94-066-1998 外科植入物金属材料.磷酸钙钙/磷比数量的测定(Materials for surgicalimplants. Quantitativedetermination of the Ca/Pratio of calciumphosphates.)NF S94-471-2000 外科设备.金属材料.第1部分:不锈钢(Surgical instruments -Metallic materials - Part 1 :stainless steel.)编号中文名称英文名称返回。