This section lists out the primary hardware features of the system. There are no configurable options in this section, only information. Lists the the following:System Informationo BIOS Versiono Service Tago Asset Tago Ownership Tago Manufacture Dateo Ownership DateMemory Informationo Memory Installedo Memory Availableo Memory Speedo Memory Channel Modeo Memory Technologyo DIMM A Sizeo DIMM B SizeProcessor Informationo Processor Typeo Core Counto Processor IDo Current Clock Speed 该选项列出系统的主要硬件信息。
此处仅提供信息，无法修改。
系统信息o BIOS 版本o机器编号o资产编号o Ownership编号o出厂日期o Ownership日期内存信息o安装内存容量o可用内容容量o当前内存频率o Memory通道o Memory技术o DIMM A尺寸o DIMM B尺寸CPU信息o CPU型号o CPU核数（几核）o CPU IDo当前时钟频率o Minimum Clock Speedo Maximum Clock Speed Device Informationo Primary Hard Driveo Modular Bay Deviceo System eSATA Deviceo Dock eSATA Deviceo Video Controllero Video BIOS Versiono Video Memoryo Panel Typeo Native Resolutiono Audio Controllero Modem Controllero Wi-Fi Deviceo Cellular Deviceo Bluetooth Deviceo最小时钟频率o最大时钟频率设备信息o主硬盘容量o光驱型号o系统eSATA设备o Dock eSATA 设备o显卡o显卡BIOS版本o显存大小o液晶屏类型o分辨率o声卡o Modem控制器o Wi-Fi 设备型号o Cellular Deviceo蓝牙The computer attempts to boot from the sequence of devices specified in this list:Diskette driveUSB Storage DeviceCD/DVD/CD-RW Drive.Internal HDD (IRRT)Cardbus NIC 计算机尝试从以下列表顺序启动：软驱USB存储设备光驱Internal HDD (IRRT)Cardbus NICThis list specifies the order that the BIOS searches devices when trying to find an operating system to boot. To change the boot order, select the device to be changed in the list then click the up/down arrows or use the keyboard PgUp/PgDn keys to change the boot order of the device. The boot devices can also be de-selected from the list using the check boxes.我们可以勾选需要启动的设备。
并在界面右侧对显示的设备设置启动的顺序，可以通过鼠标也可以通过上下键选择。
我们可以通过选择UEFI BIOS启动，点击“Add Boot Option”自定义启动选项。
Module BayExpressCard or PC CardMedia Card, PC Card and 1394External USB PortMicrophoneeSATA PortsHard Drive Free Fall ProtectionCamera / Microphone Default setting: All enabled.模块设备ExpressCard 或PC CardSD卡, PC卡和1394外置USB口内置麦克风eSATA口自由落体硬盘保护摄像头/ 麦克风默认所有设备启用。
This field lets you set, change, or delete the administrator (admin) password (sometimes called the "setup" password). The admin passwaord enables several security features when set including:Restricts changes to the settings in SetupRestricts the boot devices listed in the F12 Boot Menu tothose enabled in the "Boot Sequence" field.Prohibits changes to the owner and asset tags.Substitutes for the system password if the system prompts fora password during power on.Successful changes to this password take effect immediately.Default Setting: Not set 该页面可以设置，修改，或删除Admin 密码。
设置了Admin密码将启用下面安全功能：限制改变BIOS设置限制F12启动菜单的设备禁止修改Owner和Asset编号在POST界面可以替代system password默认没有设置Admin 密码。
注意：如果删除Admin 密码，System 密码也被删除。
Admin 密码可以被使用去删除硬盘密码。
但是必须首先设置Admin密码；如果已经设置了System密码或硬盘密码，不能再设置Admin密码。
当设置了Admin 密码，该项可允许/禁用修改WIFI 开关设置和WIFI Catcher设置许可－不需要管理员密码可以修改或者删除无线设置拒绝－需要有效的管理员密码This field allows the computer to power up from the off state when triggered by a special LAN signal or from Hibernate state when triggered by a special wireless LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system.Disabled— Do not allow the system to power on when itreceives a wake-up signal from the LAN or wireless LAN.LAN Only— Allow the system to be powered on by specialLAN signals.WLAN Only— Allow the system to be powered on by specialWLAN signals.LAN or WLAN— Allow the system to be powered on byspecial LAN or wireless LAN signals.Default setting: Disabled 关闭或启用远程LAN唤醒Disabled—关闭LAN/WLAN 唤醒.LAN Only—允许LAN唤醒WLAN Only—允许WLAN唤醒LAN or WLAN—允许LAN和WLAN唤醒默认：关闭This option lets you choose one of two methods to enable the keypad that is embedded in the internal keyboard.Fn Key Only— The keypad is only enabled when you holddown the <；Fn>；key.By Num Lk— The keypad is enabled when (1) the Num LockLED is on and (2) no external keyboard is attached. Note thatthe system might not notice immediately when an externalkeyboard is detached.☆NOTE:When Setup is running, this field has no effect—Setup works inthe FN Key Only mode.Default Setting: Fn Key Only.数字小键盘的设置选项：通过Fn键来控制小键盘；必须按住Fn键再输入带有小键盘的字母键。
通过Num lk键来控制小键盘；该项设置后，按Num LK键点亮数字锁定灯，直接按带有小键盘的字母键。
默认：Fn控制This option defines how the system handles mouse and touch pad input.Serial Mouse— Use a serial mouse and disable the internaltouch pad.PS/2 Mouse— Disable the integrated touch pad when anexternal PS/2 mouse is present.Touchpad-PS/2— Leave the integrated touch pad enabledwhen an external PS/2 mouse is present.Default Setting: Touchpad-PS/2.鼠标和触摸板输入设置选项：使用串口鼠标时，禁用触摸板Ps/2口鼠标连接时，禁用触摸板当外接鼠标存在时，保留使用触摸板默认设置：Touchpad-PS/2（当外接鼠标存在时，保留使用触摸板）该界面可以设置在计算机POST界面，启用或禁用USB 设备、点击复选框，启用USB emulation如设置禁用，将不能从任何USB总线设备（软驱，硬盘，u盘）启动默认：启用This field can speed up the boot process by bypassing some compatibility steps.Minimal— Boot quickly unless the BIOS has been updated,memory changed, or the previous POST did not complete.Thorough— Do not skip any steps in the boot process.Auto— Allow the operating system to control this setting(this works only when the operating system supports Simple 该界面可以设置CPU加速启动最快—除BIOS 被修改，内存改变或者上次启动没有完成，将执行快速启动完全—在启动过程中不跳过任何的步骤自动—允许操作系统控制(仅在操作系统支持Simple Boot Flag).默认：最快。