Product CatalogNANJING SART SCIENCE & TECHNOLOGY DEVELOPMENT CO.,LTD Maqun Science & Technology Park, Qingma Road 6#, Nanjing, ChinaTel :+86-25-83241391Company IntroductionSART Technology﹐the first Chinese manufacturer of SMD fuse﹐was founded in 2006﹒SART has devoted itself to research and develop circuit protection devices ever since﹒SART’s facility in Nanjing are certified by TS16949, ISO 9001 and ISO14001﹒Our main products include SMD fuses and Current Sensing Resistors(CSR)﹒ Our SMD fuses have been widely used in different applications like LCD panels、battery packs、battery chargers、digital cameras、cell phones etc﹒SART ceramic 6125 fuses with raw material originated from Germany have the advantage of a higher breaking capacity﹐facilitating their use in circuits with higher current and voltage﹒Our current sensing resistors(CSR) have great competitive edge in terms of ultra low ohm﹐low TCR﹐tight tolerance﹐high withstanding surge current and low thermal EMF﹒They are designed for current detecting and can be perfectly utilized by intelligent Li-ion rechargeable batteries﹒With our mission in mind﹐SART has made huge investment in building a strong R&D team﹐a global sales team and an international management team to provide our best service to global customers﹒SART’s mission and commitment are ﹕S ervice: Global sales offices and on-time deliveryA ffordability: Best quality for best prices availableR ecognition: Win trust and award from major customersT echnology: Innovative technology for the marketYOU GIVE US AN OPPORTUNITY; WE PROMISE YOU THE FUTURE!Contents⏹Fuse Selection Guide (1)Square Ceramic Surface Mount Fuse⏹Fast Acting of S6125-F Series (5)Thick Film Surface Mount Fuse⏹Fast Acting of S0603-F Series (9)⏹Slow Blow of S0603-S Series (13)⏹Fast Acting of S1206-F Series (17)⏹Slow Blow of S1206-S Series (21)Current Sensing Surface Mount Resistor ⏹Thick Film of SK Series (25)●0603 of SK Series●0805 of SK Series●1206 of SK Series●1210 of SK Series●2010 of SK Series●2512 of SK Series⏹Metal Strip of SM Series (28)●1206 of SM Series●2512 of SM Series⏹Metal Foil of SMF Series (31)●0805 of SMF Series●1206 of SMF Series●2512 of SMF Series⏹Recommended Solder Pad Layout..34⏹Recommended IR-Reflow Profile (35)⏹Packaging (36)⏹Storage Condition (39)This selection guidelines and product data are intended to provide technical information that will help with selection of fuse. Since these are only a few of the contributing parameters, application testing is strongly recommended and should be used to verify performance in the application circuit.1. Fuse selection DescriptionDuring normal load conditions, the fuse must carry the normal operating current of the circuit without nuisance openings. However, when an overcurrent occurs the fuse must interrupt the overcurrent and withstand the voltage across the fuse after internal arcing. To properly select a fuse the following items must be considered:➢Application voltage (AC or DC)➢Normal operating current➢Ambient temperature➢Overload conditions and opening times➢Maximum available fault current➢Pulse (or Surge current, Inrush current, Start-up current) characteristics➢Physical size and available board space➢Standards requirements or environmental protection requestApplication Voltage:The voltage rating of the fuse must be greater than (or equal to) the maximum open circuit voltage Normal operating current: An operating current of 75% or less than rated current of fuse is recommended for operation at 25℃ to avoid nuisance openings.Ambient temperature:All electrical characteristics of fuse are rated and validated at an ambient temperature of 25℃.Both higher and lower ambient temperatures will affect the fuse’s opening and current carrying characteristics. Please refer to the temperature derating curve for individual product series found in the specifications.Overload conditions and opening times:Specific attention must be given to first overload operating points. For fuses, the first overload point is usually between 200% to 300% of rated current.Maximum available fault current:The interrupting rating of fuse must meet or greater than the maximum fault current of the circuit.Pulse current characteristics:Transient Pulse current is used to describe wave shapes that result from any start up, Inrush, Surge, or transient currents in a circuit. Electrical pulses produce thermal cycling and possible mechanical fatigue that could affect the life of the fuse. Initial or start-uppulses are normal for some applications and require the characteristic of a slow blow fuse. The fuse’s capability to withstand a surge pulse without causing thermal stress to the fuse element, which may result in nuisance openings, can be determined once the circuit’s pulse I 2t is calculated. The circuit designer nee ds to properly size the fuse so that the fuse’s melting I 2t value is greater than or equal to the pulse I 2t divide by a pulse factor Fp. In design the selected fuse should have a I 2t value much greater than the I 2t value of pulse. The I 2t value of a pulse can be approximated from the following formulas for a typical wave Shape, refer to P1.Physical size and available board space:Please refer to the product dimensions presented in Sartfuse product datasheet for specific information (such as 0603/1206/6125).Standards requirements or environmental protection request:Please refer to the product datasheet or contact us, we will supply specially service to you. 2. Flow for Fuse selectionStep1. Measurement of circuit values using actual device.Measure the circuit values, such as operating current, Inrush current waveform, Ambient temperature.Step2. Calculation from operating current. Rated current of fuse ≧Operating current/①/② ①Rated derating factor: 0.75②Temperature derating factor: (Look Temperature Derating Curve P1)Example: Operating current = 1.7A, Ambient temperature = 80 o CChoosing Rated current of fuse ≧ 1.7/0.75/0.91 = 2.491A(0.91:Temperature 80 o C derating factor)T e m pTemperature in degrees o CP1: Chip fuse Temperature Derating Curve2Fuse Selection GuideStep3. Consider from overload current.Specific attention must be given to first overload operating points. For fuses, the first overload point is usually between 200% to 300% of rated current. Referring to the I/T curve(Look P2).P2: S1206-F Series I/T curveSteo4. Calculation from inrush current.Choosing I fuse2t >I pulse2t/0.25 25%(Pulse Factor 100,000 surge Pulses)In design the selected fuse should have a I2t value much greater than the I2t value of pulse.The I2t value of a pulse can be approximated from the following formulas for a typical wave Shape, refer to P3.Fuse Selection GuideStep5. Final determination of rated valueFrom calculation results of step2 through step4 ,determine the rate value Step6. Operation check using actual device.After selecting the rating, confirm if the device works properly under the pre-determined conditions.ReliabilitySafetySurface Mount Fuses6125Size> Fast Acting > S6125-F SeriesAgency File Number Ampere Range JDYX2.E31954 1A~20A JDYX8.E31954 1A~20APSE11020297 1A~5A PSE110202966.3A~10ACertificateFile NumberISO9001:2008 J10Q20600R0S ISO14001:2004 J10E20601R0S ISO/TS16949:20090117251• Fast acting ，Inrush withstand capability • Wire -In-Air performance• Wide range of current rating available• 6.1mm× 2.5mm spuare shape surface mount • Higher temperature profiles• -50℃~125℃ operating temperature • Excellent environmental integrity • RoHS compliant • Halogen -free• Battery pack• PC related equipment and peripherals (Hard driver , Printer , etc.)• Digital camera (Digital still camera) • Game equipment• LCD monitor , LCD modules • Wireless basestation • Power supply • Medical device*Measured at≤10% rated current and 25 o C **Melting I 2T at 10 times of rated currentGeneral Application Agency / Certificate InformationOrdering Information Typical Nominal Cold DCR*I 2T **(mΩ)(A 2S)S6125-F -1.0A 1125UL 1000.355S6125-F-1.25A1.2512550A 890.481S6125-F-1.6A 1.6125125V AC 580.847S6125-F-2.0A 2125160V DC 320.84S6125-F-2.5A 2.512527 1.403S6125-F-3.15A3.15125PSE 21 2.054S6125-F-4.0A 4125100A 16 3.44S6125-F-5.0A 5125100V AC14 4.843S6125-F-6.3A 6.31251010.558S6125-F-7.0A 71259.410.584S6125-F-8.0A81257.417.628S6125-F-10.0A 10125 5.930.3S6125-F-12.0A1265 4.842.221S6125-F-15.0A 1565 3.769.753S6125-F-20.0A20653132Part NumberUL 50A65VAC/DCCurrent Rating(A)Voltage Rating(V)InterruptingRating5 Surface Mount Fuses6125Size> Fast Acting > S6125-F SeriesCatalo S6125—F —1.0A“1.0A” Ampere Rating: 1A“ F” Electrical Characteristic: F = Fast acting “6125” Size Numbe r “ S” Symbol of SARTShape & Dimensions: (mm)Recommended Land Patterns: (mm) Materials:L W t D 6.1±0.22.5±0.12.5±0.11.4±0.1Components MaterialBody CeramicTerminations Au Plated Brass CapElementSilver Plated or Copper Alloy wireDimensions A B C DSpec3.0±0.3 8.0±0.3 3.0±0.3 2.5±0.3Catalog SymbolDimensions Recommended Land Patterns MaterialsB A DC Unit:mmUnit:mm6 Surface Mount Fuses6125Size> Fast Acting > S6125-F SeriesTime Current Curve:Time Current CurveTemperature Derating CurveAmpere Rating % of CurrentRatingOpening Time 1A-20A 100% Min.4hr. 1A-10A 200% Max.5s 12A - 20A200%Max.20sI 2T vs Time CurveElectrical Characteristics 020406080100120-50-35-20-5102540557085100115130ambient temperature(℃)p e r c e n t o f r a t i n g (%)7 6125Size> Fast Acting > S6125-F SeriesReliability Test:Item Test condition/ Methods Performance StandardTime/Current100% In No Fusing;4hr min. UL248-14 200% In1~10A < 5 s12~20A < 20 sRefer to SARTFile 1000% In 1ms-10ms IEC60127-4Voltage Drop 100% of its rated current1-6.3A<300mv7-10A<220mv12A-20A<150mvIEC-60127-4Endurance Test 125% of its rated current1-6.3A<70℃7-10A<85℃IEC-60127-4 100% of its rated current 12-20A<105℃UL248-14Interrupting Ability 50A/125V AC 160V DC(1A-10A)50A/65VAC/DC(12A-20A)without permanent arcing,ignition and bursting offuse linkUL248-14IEC60127-4Solderability 240o C±5℃,3s±0.5s 95% coverage min.IEC60127-4 IEC60068-2-20; MIL-STD-202Resistance to soldering 260o C±5℃，10s±0.5s △R:<10%MIL-STD-202Method 210High Temperature Operating Life T=70±2℃，0.6In，96h △R: <10%MIL-STD-202Method 108Humidity(steady state) T=40±2℃，90～95%RH，1000h △R: <10%MIL-STD-202Method 103Low TemperatureStorageT=-55±3℃，96 h △R: <10% IEC60068-2-1High TemperatureStorageT=125±2℃，96h △R: <10% IEC60068-2-2Salt Spray 5% salt solution ，48 h △R: <10% MIL-STD-202 Method 101Thermal Shock 5 cycles between -55℃/+125℃,60 minutes ; each extreme△R: <±(10%R+0.005) IEC 60068-2-14Reliability Test0603Size> Fast Acting > S0603-F SeriesAgency File Number Ampere RangeJDYX2.E319540 0.5A~6A JDYX8.E3195400.5A~6ACertificate File NumberISO9001:2008 J10Q20600R0S ISO14001:2004 J10E20601R0S ISO/TS16949:20090117251• Fast Acting• 1.6mm×0.8mm physical size• Thick film manufacturing method, ceramic substrate, silver fusing element• -50o C~125 o C operating temperature • Excellent environmental integrity • RoHS compliant • Halogen -free• Battery pack• PC related equipment and peripherals (Harddriver, Printer, etc.)• Portable devices (Mob ile phone, PDA batterycharger, etc.)• Digital camera (Digital still camera) • Game equipment• LCD monitor, LCD modules • Wireless basestation* Measured at≤10% rated current and 25 o C** Melting I 2T at 10 times of rated currentPart Number MarkingCurrent Rating (A) Voltage RatingInterrupting RatingMax Cold DCR *(Ω) Typical I 2T ** (A 2S) S0603-F-0.5A F 0.5 32V DC50A/32V DC0.940 0.0067 S0603-F-0.75A G 0.75 0.448 0.0087 S0603-F-1.0A H 1.0 0.252 0.0150 S0603-F-1.5A K 1.5 0.1080.0365 S0603-F-2.0A N 2.0 0.058 0.0595 S0603-F-2.5A O 2.5 0.043 0.1222 S0603-F-3.0A P 3.0 0.044 0.1350 S0603-F-3.5A R 3.5 0.032 0.1891 S0603-F-4.0A S 4.0 32V DC35A/32V DC 0.0190.3559 S0603-F-5.0A T 5.0 0.01350.7030 S0603-F-6.0A66.00.0115 0.8861GeneralApplication Agency / Certificate InformationOrdering InformationSurface Mount Fuses0603Size> Fast Acting > S0603-F SeriesCatalo S0603—F —1.0A“1.0A” Ampere Rating: 1A“ F” Electrical Characteristic: F = Fast acting “0603” Size Numbe r “ S” Symbol of SARTShape & Dimensions: (mm)Recommended Land Patterns: (mm) Materials:DimensionsSize L 1.60±0.15 W0.80±0.15 T 0.40±0.10 B0.30±0.20Components MaterialSubstrate CeramicTerminations Silver over-plated with tin (100%)ElementSilver or Silver / PalladiumDimensions A B C DSpec 1.0±0.2 3.0±0.5 1.4±0.2 1.0±0.3Catalog SymbolDimensions Recommended Land Patterns MaterialsBAD CUnit:mmUnit:mmSurface Mount Fuses 0603Size> Fast Acting > S0603-F Series• The current carrying capacity will be affected by ambient temperature which was showed in the figure.•This current derating curve is for fusing characteristics.Example:Work Temp:80℃Temp derating factor = 91% I actual = I normal / 0.91Time Current CurveTemperature Derating CurveAmpere Rating % of Current RatingOpeningTime 500mA-6A 100% ＞4 h 500mA-6A 250%≤5 sI 2T vs Time CurveElectrical Characteristics Temperature in degrees ℃T e m p d e r a t i n g f a c t o r %0603Size> Fast Acting > S0603-F SeriesItem Test condition / Methods Performance StandardVoltage Drop 100% In; Temperature in fuse wasstabilizedDeviation between themean value:<15%IEC 60127-1Time/Current 100% In No Fusing;4h min.SART File 250% In Within 5sEndurance Test 100% In, 1h on,15min off, 100 cycles;followed by 1h at 125%In│△R│<10%Legible appearanceIEC 60127-1Maximum Sustained Dissipation 125%In, during the last 10min of theendurance testchanged with currentratingIEC 60127-1Temperature Rise 100%In △T<75℃UL248-14Interrupting Ability 50A /32V DC(500mA-3.5A)35A/32V DC(4A-6A)Without permanent arcing,ignition and bursting offuse linkUL248-14Solderability 240o C±5℃,3s±0.5s 95% coverage min.IEC60127-4 IEC60068-2-20 MIL-STD-202Resistance to Soldering 260o C±5℃,10s±0.5s│△R│<10%Legible appearanceMIL-STD-202IEC60127-4Bending Test Distance between holding points：90mmBending：1mm ; time:10s│△R│<10%No mechanical damagesIEC 60127-4High Temperature Operating Life 70℃±2℃, 96h, at 60% In │△R│<10%; no fusingMIL-STD-202Method 108Low TemperatureStorage-55℃±2℃, 96h │△R│<10%IEC60068-2-1 High TemperatureStorage125℃±2℃, 96h │△R│<10%IEC60068-2-2Humidity (steady state) 40±2℃, 90～95%RH, 1000h │△R│<10%MIL-STD-202Method 103Salt Spray 5% salt solution，48h exposure│△R│<10%Legible appearanceMIL-STD-202Method 101Thermal Shock 5 cycles between -55℃/+125℃,60 minutes ; each extreme│△R│<10%No mechanical damagesIEC 60068-2-14Reliability Test0603Size> Slow Blow > S0603-S SeriesAgency File Number Ampere RangeJDYX2.E319540 0.5A~6A JDYX8.E3195400.5A~6ACertificateFile NumberISO9001:2008 J10Q20600R0S ISO14001:2004 J10E20601R0S ISO/TS16949:20090117251• Slow Blow• 1.6mm×0.8mm physical size• Thick film manufacturing method, ceramic substrate, silver fusing element• -50o C~125 o C operating temperature • Excellent environmental integrity • RoHS compliant • Halogen -free• Battery pack• PC related equipment and peripherals (Harddriver, Printer, etc.)• Portable devices (Mobile phone, PDA batterycharger, etc.)• Digital camera (Digital still camera) • Game equipment• LCD monitor, LCD modules • Wireless basesta tion* Measured at≤10% rated current and 25 o C** Melting I 2T at 10 times of rated currentPart Number MarkingCurrent Rating (A) Voltage RatingInterrupting RatingMax Cold DCR *(Ω) Typical I 2T ** (A 2S) S0603-S-0.5A F 0.5 32V DC50A/32V DC1.148 0.0072 S0603-S-0.75A G 0.75 0.582 0.0113 S0603-S-1.0A H 1.0 0.260 0.0746 S0603-S-1.5A K 1.5 0.1040.1125 S0603-S-2.0A N 2.0 0.054 0.1752 S0603-S-2.5A O 2.5 0.036 0.4001 S0603-S-3.0A P 3.0 0.027 0.7329 S0603-S-3.5A R 3.5 0.022 0.9758 S0603-S-4.0A S 4.0 32V DC35A/32V DC 0.0162.1722 S0603-S-5.0A T 5.0 0.01052.9022 S0603-S-6.0A66.00.0075 8.4692GeneralApplication Agency / Certificate InformationOrdering Information0603Size> Slow Blow > S0603-S SeriesCatalo S0603—S —1.0A“1.0A” Ampere Rating: 1A“ S” Electrical Characteristic: S = Slow blow “0603” Size Numbe r “ S” Symbol of SARTShape & Dimensions: (mm)Recommended Land Patterns: (mm)Materials:Dimensions Size L 1.60±0.15 W 0.80±0.15 T 0.40±0.10 B0.30±0.20Components Material Substrate CeramicTerminations Silver over-plated with tin (100%) ElementSilver or Silver / PalladiumDimensionsA B C D Spec1.0±0.2 3.0±0.5 1.4±0.2 1.0±0.3Catalog SymbolDimensions Recommended Land Patterns MaterialsBAD CUnit:mmUnit:mmTime Current Curve:• The current carrying capacity will be affected by ambient temperature which was showed in the figure.•This current derating curve is for fusing characteristics.Example:Work Temp:80℃Temp derating factor = 91% I actual = I normal / 0.91Ampere Rating% of Current Rating Opening Time500mA-6A 100% ＞4 h500mA-6A 200% ≤60 s500mA-750mA 1000% >0.1ms1A-3A 1000% >0.3ms 3.5A-6A 1000% >0.6msTime Current CurveTemperature Derating Curve I2T vs Time CurveElectrical Characteristics T e m p d e r a t i n g f a c t o r %Reliability Test:Characteristics Test condition / Methods Requirement Test ReferenceVoltage Drop 100% In; Temperature in fuse wasstabilizedDeviation between themean value:<15%IEC 60127-1Time/Current100% In No Fusing;4h min.SART File 200% In ≤60 s1000% In(500mA-750mA)1000% In(1A-3A)1000% In(3.5A-6A)>0.1ms>0.3ms>0.6msEndurance Test 100% In, 1h on,15min off, 100 cycles;followed by 1h at 125%In│△R│<10%Legible appearanceIEC 60127-1Maximum Sustained Dissipation 125%In, during the last 10min of theendurance testchanged with currentratingIEC 60127-1Temperature Rise 100%In △T<75℃UL248-14Interrupting Ability 50A /32V DC(500mA-3.5A)35A/32V DC(4A-6A)Without permanent arcing,ignition and bursting offuse linkUL248-14Solderability 240o C±5℃,3s±0.5s 95% coverage min.IEC60127-4 IEC60068-2-20 MIL-STD-202Resistance to Soldering 260o C±5℃,10s±0.5s│△R│<10%Legible appearanceMIL-STD-202IEC60127-4Bending Test Distance between holding points：90mmBending：1mm ; time:10s│△R│<10%No mechanical damagesIEC 60127-4High Temperature Operating Life 70℃±2℃, 96h, at 60% In │△R│<10%; no fusingMIL-STD-202Method 108Low TemperatureStorage-55℃±2℃, 96h │△R│<10%IEC60068-2-1 High TemperatureStorage125℃±2℃, 96h │△R│<10%IEC60068-2-2Humidity (steady state) 40±2℃, 90～95%RH, 1000h │△R│<10%MIL-STD-202Method 103Salt Spray 5% salt solution，48h exposure│△R│<10%Legible appearanceMIL-STD-202Method 101Thermal Shock 5 cycles between -55℃/+125℃,60 minutes ; each extreme│△R│<10%No mechanical damagesIEC 60068-2-14Reliability Test1206Size> Fast Acting > S1206-F SeriesAgency File Number Ampere RangeJDYX2.E319540 0.5A~7AJDYX8.E319540 0.5A~7ACertificate File Number ISO9001:2008 J10Q20600R0SISO14001:2004 J10E20601R0SISO/TS16949:2009 0117251• Fast Acting• 3.10mm×1.55mm physical size• Thick film manufacturing method, ceramic substrate, silver fusing element• -50o C~125 o C operating temperature• Excellent environmental integrity• RoHS compliant• Halogen-free• Battery pack• PC related equipment and peripherals (Hard driver, Printer, etc.)• Portable devices (Mobile phone, PDA battery charger, etc.)• Digital camera (Digital still camera)• Game equipmentPart Number Marking CurrentRating(A)VoltageRatingInterruptingRatingMaxColdDCR*(Ω)TypicalI2T**(A2S)S1206-F-0.5A F 0.532V DC 50A/32V DC 1.375 0.0155S1206-F-0.75A G 0.75 0.605 0.0276 S1206-F-1.0A H 1.0 0.270 0.0279 S1206-F-1.5A K 1.5 0.130 0.0491 S1206-F-2.0A N 2.0 0.074 0.1251 S1206-F-2.5A O 2.5 0.051 0.1255 S1206-F-3.0A P 3.0 0.033 0.1350 S1206-F-3.15A Z 3.15 0.0300 0.1490 S1206-F-3.5A R 3.5 0.0325 0.1948S1206-F-4.0A S 4.032V DC 35A/32V DC 0.021 0.3025S1206-F-5.0A T 5.0 0.0165 0.5207 S1206-F-6.0A 6 6.0 0.0145 0.8134 S1206-F-7.0A U 7.0 0.0085 4.0418GeneralApplicationAgency / Certificate InformationOrdering InformationSurface Mount Fuses 1206Size> Fast Acting > S1206-F Series• LCD monitor, LCD modules • Wireless basestation* Measured at≤10% rated current and 25 o C ** Melting I 2T at 10 times of rated currentCatalo S 1206—F —1.0A“1.0A” Ampere Rating: 1A“ F” Electrical Characteristic: F = Fast acting “1206” Size Numbe r “ S” Symbol of SARTShape & Dimensions: (mm)Recommended Land Patterns: (mm) Materials: Dimensions Size L 3.10±0.20 W 1.55±0.20 T 0.55±0.20 B0.50±0.20ComponentsMaterialSubstrate CeramicTerminationsSilver over-plated with tin (100%)ElementSilver or Silver /Catalog SymbolDimensions Recommended Land PatternsMaterialsBAD CUnit:mm17 Surface Mount Fuses1206Size> Fast Acting > S1206-F SeriesTime Current Curve:• The current carrying capacity will be affected by ambient temperature which was showed in the figure.•This current derating curve is for fusingcharacteristics.Example:Work Temp:80℃Temp derating factor = 91% I actual = I normal / 0.91PalladiumDimensions A B C DSpec2.0±0.3 4.4±0.5 2.4±0.3 1.2±0.3Time Current CurveTemperature Derating CurveAmpere Rating % of Current Rating OpeningTime 500mA-7A 100% ＞4 h 500mA-7A 250% ≤5 sI 2T vs Time CurveElectrical Characteristics Unit:mm18 19Temperature in degrees ℃T e m p d e r a t i n g f a c t o r %1206Size> Fast Acting > S1206-F SeriesReliability Test:Item Test condition / Methods Performance StandardVoltage Drop 100% In; Temperature in fuse wasstabilizedDeviation between themean value:<15%IEC 60127-1Time/Current 100% In No Fusing ; 4h min.SART File 250% In Within 5sEndurance Test 100% In, 1h on,15min off, 100 cycles;followed by 1h at 125%In│△R│<10%Legible appearanceIEC 60127-1Maximum Sustained Dissipation 125%In, during the last 10min of theendurance testchanged with currentratingIEC 60127-1Temperature Rise 100%In △T<75℃UL248-14Interrupting Ability 50A /32V DC(500mA-3.5A)35A/32V DC(4A-7A)Without permanent arcing,ignition and bursting offuse linkUL248-14Solderability 240o C±5℃,3s±0.5s 95% coverage min.IEC60127-4 IEC60068-2-20 MIL-STD-202Resistance to Soldering 260o C±5℃,10s±0.5s│△R│<10%;Legible appearance;MIL-STD-202IEC60127-4Bending Test Distance between holding points：90mmBending：1mm ; time:10s│△R│<10%;No mechanical damagesIEC 60127-4High Temperature Operating Life 70℃±2℃, 96h, at 60% In │△R│<10%; no fusingMIL-STD-202Method 108Low TemperatureStorage-55℃±2℃, 96h │△R│<10%IEC60068-2-1 High TemperatureStorage125℃±2℃, 96h │△R│<10%IEC60068-2-2Humidity (steady state) 40±2℃, 90～95%RH, 1000h │△R│<10%MIL-STD-202Method 103Salt Spray 5% salt solution，48h exposure│△R│<10%Legible appearanceMIL-STD-202Method 101Thermal Shock 5 cycles between -55℃/+125℃,60 minutes ; each extreme│△R│<10%No mechanical damagesIEC 60068-2-14Reliability Test1206Size> Slow Blow> S1206-S SeriesAgency File Number Ampere Range JDYX2.E319540 0.5A~7AJDYX8.E319540 0.5A~7ACertificate File NumberISO9001:2008 J10Q20600R0SISO14001:2004 J10E20601R0SISO/TS16949:2009 0117251• Slow Blow• 3.10mm×1.55mm physical size• Thick film manufacturing method, ceramic substrate, silver fusing element• -50o C~125 o C operating temperature• Excellent environmental integrity• RoHS compliant• Halogen-free• Battery pack• PC related equipment and peripherals (Hard driver, Printer, etc.)• Portable devices (Mobile phone, PDA battery charger, etc.)• Digital camera (Digital still camera)• Game equipment• LCD monitor, LCD modules• Wireless basestation*Measured at≤10% rated current and 25 o C General ApplicationAgency / Certificate InformationOrdering InformationSurface Mount Fuses1206Size> Slow Blow> S1206-S Series**Melting I 2T at 10 times of rated currentCatalo S 1206—S —1.0A“1.0A” Ampere Rating: 1A“S ” Electrical Characte ristic: S = Slow Blow “1206” Size Numbe r “ S” Symbol of SARTShape & Dimensions: (mm)Part Number MarkingCurrent Rating (A) Voltage RatingInterrupting Rating 32V DC Max Cold DCR *(Ω)Typical I 2T ** (A 2S) S1206-S-0.5A F 0.5 32V DC50A/32V DC1.344 0.0200 S1206-S-0.75A G 0.75 0.672 0.0358 S1206-S-1.0A H 1.0 0.358 0.1945 S1206-S-1.5A K 1.5 0.1570.4137 S1206-S-2.0A N 2.0 0.103 0.4383 S1206-S-2.5A O 2.5 0.073 0.7343 S1206-S-3.0A P 3.0 0.041 1.5267 S1206-S-3.5A R 3.5 0.035 1.5312 S1206-S-4.0A S 4.0 32V DC35A/32V DC0.027 2.5356 S1206-S-5.0A T 5.0 0.0193.3999 S1206-S-6.0A 6 6.0 0.015 5.7505 S1206-S-7.0AU7.00.0088.8200Dimensions Size L 3.10±0.20 W 1.55±0.20 T 0.55±0.20 B0.50±0.20Catalog SymbolDimensions Unit:mm21 Surface Mount Fuses 1206Size> Slow Blow> S1206-S SeriesRecommended Land Patterns: (mm) Materials:• The current carrying capacity will beaffected by ambient temperature which was showed in the figure.•This current derating curve is for fusing characteristics.Example:Work Temp:80℃Temp derating factor = 91% I actual = I normal / 0.91Components MaterialSubstrate CeramicTerminations Silver over-plated with tin (100%)ElementSilver or Silver / PalladiumDimensions A B C DSpec2.0±0.3 4.4±0.5 2.4±0.3 1.2±0.3Ampere Rating % of Current Rating Opening Time 500mA-7A 100%＞4 h 500mA-7A 200% ≤60 s 500mA-750mA 1000% >0.4ms 1A-7A 1000% >1.0msRecommended Land Patterns MaterialsTime Current CurveTemperature Derating CurveBAD CElectrical Characteristics Unit:mmI 2T vs Time Curve 22 23。