当前位置:文档之家› 水库除险加固设计毕业设计 精品

水库除险加固设计毕业设计 精品

摘要本设计主要是有关PS水库除险加固设计,PS水库位于河北省沙河市境内,工程为小(2)型五等工程,主要建筑物为五级,由主坝、副坝、溢流坝和放水洞等四部分组成。

枢纽的主要任务以防洪、灌溉和供人畜饮水为主。

PS水库现状存在的问题如下:(1)大坝基础抗滑不满足要求,坝体高水位时渗漏严重(2)坝顶高程不满足规范要求(3)放水洞闸阀损坏(4)大坝下游无消能防冲设施针对水库现状存在的主要问题,需要对水库进行初步的校核。

主要内容包括挡水坝段的抗滑稳定计算和应力复核,溢流坝段的抗滑稳定计算和应力复核,溢流坝段过水能力及消能的计算等三大部分。

坝体抗滑稳定计算是重力坝设计的一项重要内容,其目的是验算坝体沿坝基面的抗滑稳定安全度,利用公式判别大坝是否满足抗滑稳定要求。

经计算得大坝在某些工况下不满足抗滑稳定要求。

应力分析的目的是检验坝体在施工和运用期间是否满足强度要求,利用材料力学的方法检验应力是否满足要求。

经计算得大坝在某些工况下不满足要求。

溢流坝过流能力验算及消能计算依据《溢洪道设计规范》SL253-2000计算。

经计算满足要求。

根据上述校核中所出现的问题,对PS水库进行除险加固,以满足水库的正常运作。

关键词:PS水库、除险加固、抗滑稳定计算、应力复核SummaryThis design, the PS reservoir reinforcement design, PS reservoir is located in Shahe City in the works for a small (2) five other projects, the main building for the five main dam and auxiliary dam, spillway and such as water holes in four parts. The main task of the hub to flood control, irrigation and for drinking water main.PS reservoir status quo existing problems are as follows:Dam foundation sliding does not meet the requirements of serious high water level of dam leakageCrest elevation does not meet the specification requirementsWater hole gate valve damageDam downstream energy dissipation and scour protection facilitiesA preliminary check of the main problems of reservoir status quo, the need for the reservoir. The main contents include retaining monolith stability against sliding calculation and stress for review, the stability against sliding calculation and stress for review of the Spillway, Spillway over the water capacity and energy dissipation calculation.The calculation of dam stability against sliding is an important part of the gravity dam design, with the aim of checking the dam along the dam foundation stability against sliding safety, use the formula to distinguish dam whether to meet the requirements of stability against sliding. The calculated dam stability against sliding in certain conditions does not meet the requirements.The purpose of the stress analysis is to test dam during the construction and use meet the strength requirements, the use of mechanical means of checking stress to meet the requirements. Calculated dam in certain conditions does not meet the requirements.Spillway flow capacity checking and eliminate the basis for calculating the spillway design specification "SL253-2000 calculation. Calculated to meet the requirements.Problems in the above check the PS reservoir reinforcement, to meet the normal operation of the reservoir.Keywords: PS reservoir reinforcement, sliding stability calculation, the stress review目录摘要 (1)Summary (2)1 综合说明 (1)1.1工程概况 (1)1.2水文 (1)1.2.1流域概况 (1)1.2.2 气象 (2)1.2.3 水文 (2)1.2.4 泥沙 (2)1.3工程地质条件 (2)1.4工程除险设计 (3)2 水库大坝现状情况校核 (4)2.1正常蓄水位下的坝体抗滑稳定计算与坝基处应力计算 (4)2.1.1主坝抗滑稳定计算与坝基应力计算 (4)2.1.2副坝抗滑稳定计算与坝基应力计算 (9)2.1.3溢流坝抗滑稳定计算与基应力计算 (11)2.2 设计洪水位下的抗滑稳定计算与坝基应力计算 (14)2.2.1主坝抗滑稳定计算与坝基应力计算 (14)2.2.2副坝抗滑稳定计算与坝基应力计算 (16)2.2.3溢流坝抗滑稳定计算与坝基应力计算 (18)2.3 校核洪水位下的抗滑稳定计算与坝基应力计算 (22)2.3.1主坝抗滑稳定计算与坝基应力计算 (22)2.3.2副坝抗滑稳定计算与坝基应力计算 (25)2.3.3溢流坝抗滑稳定计算与坝基应力计算 (26)2.4 地震情况下,正常蓄水位时的坝体抗滑稳定计算与坝基处应力计算 (30)2.4.1主坝抗滑稳定计算与坝基应力计算 (30)2.4.2副坝抗滑稳定计算与坝基应力计算 (33)2.4.3溢流坝抗滑稳定计算与基应力计算 (35)2.5 溢流面过流能力验算 (38)2.6 消能防冲计算 (38)3 除险加固工程设计 (40)3.1 大坝防洪复合设计 (40)3.1.1 大坝防洪加固方案 (40)3.1.2 坝顶高程计算 (40)3.2 大坝防渗设 (40)3.2.1 存在的问题 (40)3.2.2 防渗方案 (41)3.2.3 坝基防渗 (41)3.3 主坝加固后抗滑稳定计算与应力复合计算 (41)3.3.1正常蓄水时,主坝抗滑稳定计算和应力复合 (42)3.3.2 设计洪水位时,主坝抗滑稳定计算和应力复合 (45)3.3.3 校核洪水位时,主坝抗滑稳定计算和应力复合 (48)3.3.4地震情况下,正常蓄水时,主坝抗滑稳定计算和应力复合 (50)3.4 溢流坝加固后抗滑稳定计算与应力复合计算 (53)3.4.1正常蓄水位时,溢流坝抗滑稳定计算与应力复合 (54)3.4.2 设计洪水位时,溢流坝抗滑稳定计算和应力复合 (57)3.4.3 校核洪水位时,溢流坝抗滑稳定计算和应力复合 (61)3.4.4地震情况下,正常蓄水时,溢流坝抗滑稳定计算和应力复合 (64)3.5 溢流面加固设计 (67)3.5.1溢流面加固方案 (67)3.5.2溢流坝过流能力验算及消能防冲验算 (67)3.6 放水洞维修加固 (68)3.6.1加固方案设计 (68)3.6.2放水洞流量计算 (68)3.7 防浪墙及坝顶设计 (68)DAM SAFETY AND EARTHQUAKES (69)英文文献翻译: (72)谢辞 (75)参考文献 (76)1 综合说明1.1工程概况PS水库位于河北省沙河市境内,属海河流域滏阳河系沙洺呵支流,水库控制流域面积4㎞2,总库容61.2万m3,是一座以防洪、灌溉和供人畜饮水的小错误!未找到引用源。

型水库。

水库枢纽主要包括:主坝、副坝、溢流坝和放水洞等建筑物。

水库大坝为浆砌石重力坝,主坝最大坝高27.5m,坝顶高程23.5m,坝顶长119m,坝顶宽4.5m,迎水面坝坡直立,背水面坝坡1:0.51,。

副坝最大坝高5.5m,坝顶长70m,坝顶宽2.9m。

溢流坝在主坝中央,采用克-奥菲真空实用堰,堰面为钢筋混凝土结构,堰顶高程20.5m,堰深3m,宽22m,设计最大泄流量161.77m3/s,采用挑流鼻坎消能,鼻坎高程9m,挑射角25°,反弧半径4m。

放水洞位于溢流坝左侧,洞口高程5.1m,出口采用碟阀控制。

水库防洪标准为20年一遇设计,200年一遇校核。

水库枢纽为五等工程,主要建筑物为5级建筑物。

经调洪演算,不同设计标准的洪水位及相应的最大泄流量如下:20年一遇的最高洪水位为21.85m,最大泄量为63.38m3/s;200年一遇的最高洪水位为23.04m,最大泄量为161.77m3/s。

2007年6月,华北水利水电勘测设计有限公司完成PS水库大坝安全鉴定,并通过河北省大坝安全管理中心核查,综合评价该水库大坝为三类坝。

1.2水文1.2.1流域概况PS水库位于沙河市册井乡,属沙洺河支流。

该河流位于沙河市西部,太行上东麓,为季节性河流,除汛期洪水径流较大外,其他月份径流量很小。

水库控制流域面积4km2,坝址以上河床平均坡降28‰。

相关主题