在FLUNET中应用TUI复杂命令
集群中使用fluent往往要用到Tui命令制作jou文件，下面给出例子应用tui 命令做简单的后处理工作。

总压
∙report si awa(inlet outer)tp no
Area-Weighted Average
Total Pressure(pascal)
----------------------------------------------------
inlet0
outer357.27557
------------------------------------
Net61.145008
∙report si awa(inlet outer)tp yes H:\optimal\impeller-09-1115-19\total-pressure.txt
∙report si awa(inlet outer)tp yes total-pressure.txt
静压
∙report si awa(inlet outer)pressure no
Area-Weighted Average
Static Pressure(pascal)
----------------------------------------------------
inlet-3.1208441
outer235
------------------------------------
Net37.631733
动压
∙report si awa(inlet outer)dy no
Area-Weighted Average
Dynamic Pressure(pascal)
----------------------------------------------------
inlet 3.1231101
outer120.85186
------------------------------------
Net23.271494
流量
∙report si vfr(inlet outer)no
Volumetric Flow Rate(m3/s)
----------------------------------------------------
inlet7.0884967
outer-7.0881147
------------------------------------
Net0.00038173632
转矩
∙report forces wall-moments no(blade hub)000001no
Moments-Moment Center(000)
……
Moments-Moment Center(000)Moment Axis(001)
……
设置压力进口
∙define bc pi inlet yes no0no0no yes no no no yes52000
∙define bc pi inlet
(inlet)
Reference Frame:Absolute[yes]yes
Use Profile for Gauge Total Pressure?[no]no
Gauge Total Pressure(pascal)[0]0
Use Profile for Supersonic/Initial Gauge Pressure?[no]no
Supersonic/Initial Gauge Pressure(pascal)[0]0
Direction Specification Method:Direction Vector[no]no
Direction Specification Method:Normal to Boundary[yes]yes
Turbulent Specification Method:K and Epsilon[no]no
Turbulent Specification Method:Intensity and Length Scale[no]no
Turbulent Specification Method:Intensity and Viscosity Ratio[no]no Turbulent Specification Method:Intensity and Hydraulic Diameter[yes] yes
Turbulent Intensity(%)[4.999999888241291]5
Hydraulic Diameter(mm)[2000.000094994903]2000
设置压力出口
∙define bc po outer no235no yes no no no yes5905no no no
∙define bc po outer
(outer)
Use Profile for Gauge Pressure?[yes]no
Gauge Pressure(pascal)[235]280
Backflow Direction Specification Method:Direction Vector[no]no
Backflow Direction Specification Method:Normal to Boundary[yes]y
Turbulent Specification Method:K and Epsilon[no]no
Turbulent Specification Method:Intensity and Length Scale[no]no
Turbulent Specification Method:Intensity and Viscosity Ratio[no]no Turbulent Specification Method:Intensity and Hydraulic Diameter[yes]y Backflow Turbulent Intensity(%)[10]5
Backflow Hydraulic Diameter(mm)[1000]900
Radial Equilibrium Pressure Distribution[no]no
Average Pressure Specification?[no]no
Specify targeted mass flow rate[no]no。