网络设备维护手册第一章交换机操作手册此部分档使用本项目交换机型号如下：S7506E/S5120/S5130/WX3024E设备登陆Console登陆1、通过交换机Console 口进行本地登录是登录交换机的最基本的方式，也是配置通过其他方式登录交换机的基础。

连接示意图如下：2、把电脑和交换机连接好后，交换机上电开机，然后在电脑上进行如下操作，首先点击开始－>程序－>附件－>通讯－>超级终端打开后出现下面图示，输入名称，可以任意输入。

输入完成点击确定，出现下面界面，连接时使用选择COM口，一般台式机为COM1或COM2，而笔记本经过转接，可能会产生COM3或COM4，也有可能是其他的，你可以在下面的选择项里看到，选择完成后点击确定。

通过上面的选择，现在到了对端口属性进行设置，一般情况下没有进行过修改，默认只要点击还原为默认值就可以了，然后再单击确定。

之后敲回车即可，会出现H3C>提示符，说明已经与交换机连接，可以进行配置了，如果没有可以重启交换机或检查连接是否正确。

telnet登陆1、新建用户名密码local-user admin /admin为用户名password cipher h3c@123 /h3c@123为密码authorization-attribute level 3 /授权admin用户的等级为3,3为最高级service-type telnet /授权admin用户的登陆方式，可以为ftp、telnet等#telnet server enable /开启telnet服务使用电脑连接至交换机：交换机加电开机显示sarting......************************************************************** ** H3C S5510-24P BOOTROM, Version 142 ** **************************************************************Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd.Creation date: Mar 12 2008, 11:17:30CPU Clock Speed : 200MHzBUS Clock Speed : 33MHzMemory Size : 128MBThe switch Mac is: 000F-E2B1-BD60Press Ctrl-B to enter Boot Menu (10)Auto-booting...Decompress Image.................................................................................................................................................... .............................................................................................................................................................. .............................................................................................................................................................. .............................................................................................................................................................. .............................................................................................................................................................. .........................................................................................................................................................O K!Starting ...****************************************************************************** * Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. All rights reserved. ** Without the owner's prior written consent, ** no decompiling or reverse-engineering shall be allowed. *******************************************************************************It will take a long time to get configuration file, please wait...Startup configuration file does not exist.User interface aux0 is available.<H3C>%Apr 26 12:03:53:611 2000 H3C SHELL/4/LOGIN: Console login from aux0 <H3C><H3C>sys[H3C][H3C]sysname neiwang[neiwang-luser-admin]pa sin admin fg)safely Save current configuration safely<cr>[neiwang]save s[neiwang]save safely Are you sure [Y/N]:y Please input the file name(*.cfg)[fla](To leave the existing filename unchanged, press the enter key):Validating file. Please wait...Now saving current configuration to the device.Saving configuration fla. Please wait... .................Configuration is saved to flash successfully.[neiwang]qu<neiwang>saveThe current configuration will be written to the device. Are you sure [Y/N]:n <neiwang>sysSystem View: return to User View with Ctrl+Z.[neiwang]DHCP Snooping was enabled.[neiwang-GigabitEthernet1/0/15]qu[neiwang]vlan 26[neiwang-vlan26][neiwang-GigabitEthernet1/0/15]port access vlan 26[neiwang-GigabitEthernet1/0/15]qu[neiwang-GigabitEthernet1/0/25]port trunk permit all ......... Done. <cr>[neiwang-GigabitEthernet1/0/25]undo port link-type ......... Done. [neiwang-GigabitEthernet1/0/25]sp[neiwang-GigabitEthernet1/0/25]speed10 Specify speed of current port 10Mb/s100 Specify speed of current port 100Mb/s1000 Specify speed of current port 1000Mb/sauto Enable port's speed negotiation automatically[neiwang-GigabitEthernet1/0/25]speed au[neiwang-GigabitEthernet1/0/25]speed auto[neiwang-GigabitEthernet1/0/25]du[neiwang-GigabitEthernet1/0/25]duplex au[neiwang-GigabitEthernet1/0/25]duplex auto[neiwang-GigabitEthernet1/0/25]qu[neiwang]dhcp[neiwang]dhcp-snooping<cr>[neiwang]dhcp-snoopingDHCP Snooping has already been enabled.[neiwang]int g 1/0/25[neiwang-GigabitEthernet1/0/25]dhcp[neiwang-GigabitEthernet1/0/25]dhcp-snoopinginformation Specify Option 82 servicetrust Trusted port[neiwang-GigabitEthernet1/0/25]dhcp-snooping tr[neiwang-GigabitEthernet1/0/25]dhcp-snooping trust<cr>[neiwang-GigabitEthernet1/0/25]dhcp-snooping trust[neiwang-GigabitEthernet1/0/25]qu[neiwang]dis valnINTEGER<1-4094> VLAN IDall All the VLANsdynamic Dynamic VLAN IDreserved Reserved VLAN IDstatic Static VLAN ID<cr>[neiwang]dis vlan all [neiwang]dis arp [neiwang]dis arpall Display static&dynamic ARP entrydynamic Display dynamic ARP entryinterface Display by Interfacesource-suppression Display ARP source suppressionstatic Display static ARP entrytimer Display ARP timervlan Display by VLANvpn-instance Display ARP entries by VPN name[neiwang]dis arp allType: S-Static D-DynamicIP Address MAC Address VLAN ID Interface Aging Type [neiwang]dis mac-a[neiwang]dis mac-address [neiwang]#interface Vlan-interface4000 //路由添加管理口vlan//路由添加管理地址IP#interface GigabitEthernet1/0/52 //回程路由#//指定要回跳的路由第二章无线维护手册设备登陆此步骤参考设备登陆设备常用操作注册APwlan ap AP1 model WA2620i-AGN /MODEL的型号一定要和实际一样/手工注册方式序列号一定要正确radio 1 /2620i是双频APservice-template 10 /调用服务模板radio enable /启用射频口radio 2service-template 10radio enable配置SSID名称wlan service-template 10 /新建服务模板10ssid TAXZFWZX /ssid为TAXZFWZXbind WLAN-ESS 10 /绑定无线接口10authentication-method open-system /以下为加密方案cipher-suite tkipsecurity-ie wpaservice-template enable /启用服务模板#interface WLAN-ESS10 /新建无线接口10，供服务模板调用port-security port-mode psk /以下为认证信息port-security tx-key-type 11keyport-security preshared-key pass-phrase si h3c@123。