5 © 2012 Oclaro Inc.
CONFIDENTIAL
Topr vs Po matrix
Optical output power, Po(mW)
800
700
600
500
400
Operating area
300
200
100
0 -20 -10 0 10 20 30 40 50
Operating temperature, Topr(oC)
(3) (1) (2)
Internal circuit
(1)
(3)
LD
(2) (Case)
Note This product is under development. Therefore, the specification is changed without notice.
3 © 2012 Oclaro Inc.
4 Lasing wavelength
5 Beam divergence parallel to the junction
6 Beam divergence Perpendicular to the junction
Ith
-
IOP
Po=700mW
VOP
Po=700mW
lp
Po=700mW
q//
Po=700mW, FWHM
Application Show Laser Laser projector Light source of optical equipments
Package
Φ5.6mm
Features
Red light emitting: 638nm typ @ 700mW Optical output power: 700mW CW Operating current: 900mA typ @ 700mW Operating voltage: 2.3V typ @ 700mW Small package: f 5.6mm Multi transverse mode
q⊥ Po=700mW, FWHM
(Note1) The value is based on Oclaro measurement.
-
200
-
mA
1,2
-
900
-ห้องสมุดไป่ตู้
mA
1,2
-
2.3
-
V
1,2
-
638
-
nm
1,2
-
8
-
o
1,2
-
35
-
o
1,2
Note This product is under development. Therefore, the specification is changed without notice.
CONFIDENTIAL
Absolute maximum rating ( Tc=25℃ ) 绝对最大额定值
No.
Items
Symbols
Ratings
Unit
Note
工作温度 存储温度
1 Optical output power(1) 2 Optical output power(2) 3 LD reverse voltage 4 Operating temperature 5 Storage temperature
Product detail: WL:638nm Po: 700mW Multi transverse mode 多横模 5.6mmPKG
Schedule 时间表 WS: Apr,2013 MP: Jan,2014
OCLARO Advantage - High Power/Short WL - High Po. Red LD in 5.6mmPKG - High efficiency - Suitable for Show laser, Laser projector
Note This product is under development. Therefore, the specification is changed without notice.
2 © 2012 Oclaro Inc.
CONFIDENTIAL
OCLARO Red LD: HL63193MG (Under Development)
光输出功率等级的工作温度而改变。请参阅page.6更多细节
Note This product is under development. Therefore, the specification is changed without notice.
4 © 2012 Oclaro Inc.
CONFIDENTIAL
Optical and Electrical characteristics (Tc=25±3℃) 光学和电气特性
Items
Symbols
Test condition
Min Typ max Unit Note
No.
1 Threshold current
2 Operating current
3 Operating voltage
Po(1) Po(2)
VR(LD) Topr Tstg
700 550
2 -10 ~ +40 -40 ~ +85
mW 1,2,3 mW 1,2,3
V 1,2 oC 1,2,3 oC 1,2
(Note1) The value is based on Oclaro measurement. (Note2) Operating temperature is defined by case temperature “Tc”. High increase in temperature of LD chip
itself is expected during operation due to high current density. Thus, without proper heat dissipation, it is observed that no specific output power is achieved or it results to LD degradation. It is advised that sufficient measure of heat dissipation should be taken so that LD’s maximum operating temperature is not exceeded during actual operation. (Note3) Optical output power rating is changed by operating temperature. Please refer to page.6 for more detail.
Note This product is under development. Therefore, the specification is changed without notice.
6 © 2012 Oclaro Inc.
CONFIDENTIAL
THANK YOU.
7 © 2012 Oclaro Inc.
OCLARO Laser Diode 激光二极 管
638nm/700mW HL63193MG specification
Oclaro Japan, Inc. Device division 设备事业部
APD No.13080 Apr/2013
1 © 2012 Oclaro Inc.
OCLARO Red LD: HL63193MG (Under Development)