各种视频插头插座接口介绍(引脚定义)各种视频插头插座接口介绍(引脚定义)SCART plug & connector: CENELEC (Co mitéEuropéen de Normalisation Electrot echnique) EN 50 049-1 / IEC 933-1Pin No. Signal Inter Conne-ction Pin No.1 Audio right channel output (0.5 Vrms, < 1K ohms) 22 Audio right channel input (0.5 Vrms, > 10K ohms) 13 Audio left channel output (0.5 Vrms, < 1K ohms) 64 Audio ground 45 Blue signal ground 56 Audio left channel input (0.5 Vrms, > 10K ohms) 37 Blue signal I/O (0.7 Vp-p, 75 ohms) 78 Function switching I/O (L: < 2V, H: > 10V, 10K ohms) 89 Green signal ground 910 Intercommunication data line No. 1 1011 Green signal I/O (0.7 Vp-p, 75 ohms)1112 Intercommunication data line No. 2 1213 Red signal ground 1314 Blanking signal ground 1415 Red signal I/O (0.7 Vp-p, 75 ohms) 1516 Blanking signal I/O (L: < 0.4V, H: >1. 0V, 75 ohms) 1617 Composite video signal ground 1818 Blanking signal ground 1719 Composite video signal output (1 Vp-p, 75 ohms, sync: negative) 2020 Composite video signal input (1 Vp-p, 75 ohms, sync: negative) 1921 Plug shield (common ground) 21此主题相关图片如下：EIAJ RGB plug & connector: EIAJ TTC-0 03Outlook of plug and connector including pin assignment are the same as SCART plug and connectorPin No. Signal Inter Conne-ction Pin No.1 Audio left channel input (0.40 mVrms, > 47K ohms) 12 Audio left channel output (0.40 mVrms, > 10K ohms) 23 Audio ground 34 Audio ground 45 Audio right channel input (0.40 mVrms, > 47K ohms) 66 Audio right channel output (0.40 mVrm s, > 10K ohms) 57 Video ground 78 Video ground 89 CVBS input (1 Vp-p, 75 ohms, sync: n egative) 1010 CVBS output (1 Vp-p, 75 ohms, sync: negative) 911 AV control input 1112 Ym input (switch for R, G & B signal to half tone level, L: < 0.4,H: > 1.0, 75 ohms) 1213 Red signal ground 1314 Ground 1415 Red signal I/O (0.7 Vp-p, 75 ohms) 1516 Ys input (switch for R, G & B signal from/to internal and external,L: < 0.4, H: > 1.0, 75 ohms) 1617 Green signal ground 1718 Blue signal ground 1819 Green signal I/O (0.7 Vp-p, 75 ohms)1920 Blue signal I/O (0.7 Vp-p, 75 ohms) 2 021 Plug shield 21S-connector: EIAJ CP-1211, IEC 84(s)80 Pin No. Signal1 Luminance (Y) signal ground2 Chrominance (C) signal ground3 Luminance (Y) signal I/O (1 Vp-p, 75 o hms, sync: negative)4 Chrominance (C) signal I/O (burst: 0.28 6 Vp-p, 75 ohms)S1 and S2 connectorPin No. S1 connector S2 connector1 Luminance (Y) signal ground Luminance (Y) signal ground2 Chrominance (C) signal ground Chromi nance (C) signal ground3 Luminance (Y) signal I/O (1 Vp-p, 75 o hms, sync: negative) Luminance (Y) sign al I/O (1 Vp-p, 75 ohms, sync: negative)4 Chrominance (C) signal I/O (burst: 0.28 6 Vp-p, 75 ohms)Squeeze control input:+ 5V DC / >100KW Chrominance (C) si gnal I/O (burst: 0.286 Vp-p, 75 ohms) Squeeze control input:+ 5V DC / >100KWLetterbox control input:+ 2.2V DC / >100KWEIAJ D-connector D1/2/3/4/5: EIAJ RC-523 7Pin No. Signal1 Y signal I/O (+700 mV & sync: +/-300 mV *1, 75 ohms)2 Y_GND3 PB (+/- 350 mV, 75 ohms)4 PB_GND5 PR (+/- 350 mV, 75 ohms)6 PR_GND7 Reserved line 18 Line 1 (0V: 525 lines, 2.2V: 750 lines, 5V: 1125 lines)9 Line 2 (0V: 59.94i / 60i, 2.2V: -, 5V: 59. 94p / 60p)10 Reserved line 211 Line 3 (0V: 4:3, 2.2V: 4:3 letter box, 5V: 16:9)12 Plug insert detect GND13 Reserved line 314 Plug insert detect (output: 10K ohms, input: >100K ohms)hooks Shell GND*1: for 1125i and 750p. -300mV for 525p/ 525i, superimposed in Y signalNote: Indication for video signal format (i: interlace, p: progressive)D1: 525iD2: 525i, 525pD3: 525i, 525p, 1125iD4: 525i, 525p, 1125i, 750pD5: 525i, 525p, 1125i, 750p, 1125pVESA DFP connector: VESA (Video Elect ronics Standards Association) Digital Flat Panel (DFP) StandardPin No. Signal Name Signal1 TX1+ TMDS positive differential output, channel 12 TX1- TMDS negative differential output, channel 13 SHLD1 Shield for TMDS channel 14 SHLDC Shield for TMDS clock5 TXC+ TMDS positive differential output, reference clock6 TXC- TMDS negative differential output, reference clock7 GND Logic Ground8 +5V Logic +5V DC Supply from the Ho st9 No Connect No Connection10 No Connect No Connection11 TX2+ TMDS positive differential output, channel 212 TX2- TMDS negative differential outpu t, channel 213 SHLD2 Shield for TMDS channel 214 SHLD0 Shield for TMDS channel 015 TX0+ TMDS positive differential outpu t, channel 016 TX0- TMDS negative differential outpu t, channel 017 No Connect No Connection18 HPD Hot Plug Detection (+5V DC to Host)19 DDC_DAT DDC2B Data20 DDC_CLK DDC2B ClockTMDSTM: Transition Minimized Differentia l SignalingDDC: Display Data ChannelDDC2B: Simplest of the DDC modes defi ned in the VESA DDC standard此主题相关图片如下：VESA P&D connector: Plug and Display Standard (P&DTM)Pin No. SignalPin No. Signal1 TMDS Data2 + 16 USB data +2 TMDS Data2 - 17 USB data -3 TMDS Data return 18 1394 outer sahield (optional) & Charge Power return4 Unused 19 1394 Vg5 Unused 20 1394 Vp6 Unused 21 TMDS Data0 +7 TMDS Clock return 22 TMDS Data0 -8 Charge power + 23 TMDS Data return9 1394 pair A, data - 24 Unused10 1394 pair A, data + 25 DDC return11 TMDS Data1 + 26 DDC data (SDA)12 TMDS Data1 - 27 DDC clock (SCL)13 TMDS Data return 28 +5V DC14 TMDS Clock + 29 1394 pair B, clock +15 TMDS Clock - 30 1394 pair B, clock -(TMDS: Trademark of Silicon Image, USB: universal serial bus, DDC: display data channel, SDA: serial data, SCL: serial cl ock)此主题相关图片如下：IEEE 1394-1995:Pin No. Signal Name Signal Inter ConnectionInter Connection with i-Link1 VP Cable power 12 VG Cable ground 23 TPB* Strobe on receive, data on trans mit (differential pair) 5 14 TPB 6 25 TPA* Strobe on receive, data on trans mit (differential pair) 3 36 TPA 4 4i-Link: 4-pin type IEEE 1394-1995Pin No. Signal Name Signal Inter Connec tionInter Connection with 1394-19951 TPB* Strobe on receive, data on trans mit (differential pair) 3 52 TPB 4 63 TPA* Strobe on receive, data on transmit (differential pair) 1 34 TPA 2 4此主题相关图片如下：VGA (15-pin Dsub connector: for analog interface of PC monitorPin No. SignalPin No. Signal1 Red video input 9 No pin2 Green video input 10 Digital ground3 Blue video input 11* Monitor ID 0 / Gr ound4 Monitor ID 2 / Ground 12* Monitor ID 1 / Serial data line (SDA)5* Digital ground / Self test 13 Horizonta l sync / H+V6 Red video ground 14 Vertical sync (VC LK for DDC)7 Green video ground 15* Reserved / Da ta clock line (DCL)8 Blue video ground。