戴尔DELL笔记本最新BIOS-中英文对照表Description 中文This section lists out the primary hardware features of the system. There are no configurable options in this section, only information.Lists the the following:∙System Informationo BIOS Versiono Service Tago Asset Tago Ownership Tago Manufacture Dateo Ownership Date∙Memory Informationo Memory Installedo Memory Availableo Memory Speedo Memory Channel Modeo Memory Technologyo DIMM A Sizeo DIMM B Size∙Processor Informationo Processor Typeo Core Counto Processor IDo Current Clock Speedo Minimum Clock Speedo Maximum Clock Speed∙Device Informationo Primary Hard Drive 该选项列出系统的主要硬件信息。
此处仅提供信息，无法修改。
∙系统信息o BIOS 版本o机器编号o资产编号o Ownership编号o出厂日期o Ownership日期∙内存信息o安装内存容量o可用内容容量o当前内存频率o Memory通道o Memory技术o DIMM A尺寸o DIMM B尺寸∙CPU信息o CPU型号o CPU核数（几核）o CPU IDo当前时钟频率o最小时钟频率o最大时钟频率∙设备信息o主硬盘容量o光驱型号o系统eSATA设备o Dock eSATAo Cellular Deviceo Bluetooth DeviceIndicates the primary battery and the media bay battery status. Also displays the AC adapter type connected to the system. 侦测主电池和第二块电池状态，也显示的型号。
Boot Sequence The computer attempts to boot from thesequence of devices specified in this list:∙Diskette drive∙USB Storage Device∙CD/DVD/CD-RW Drive.∙Internal HDD (IRRT)∙Cardbus NIC∙Onboard NICThis list specifies the order that the BIOSsearches devices when trying to find anoperating system to boot. To change the bootorder, select the device to be changed in the listthen click the up/down arrows or use thekeyboard PgUp/PgDn keys to change the bootorder of the device. The boot devices can also bede-selected from the list using the check boxes.This also where the UEFI boot option can beenable or disable. 计算机尝试从以下列表顺序启动：∙软驱∙USB存储设备∙光驱∙Internal HDD (IRRT)∙Cardbus NIC∙Onboard NIC我们可以勾选需要启动的设备。
并在界面右侧对显示的设备设置启动的顺序，可以通过鼠标也可以通过上下键选择。
我们可以通过选择UEFI BIOS启动，点击Boot Option”自定义启动选项。
Displays current date and time settings. 显示当前的日期和时间Disabled, AT, PS2 and ECP. Default setting: ECP 禁用，AT，PS2 和ECP 默认设置是ECP。
This field determines how the integrated serial port operates. The settings are Disabled, COM1, COM2, COM3 and COM4.Default setting: COM1 串口设置选项：禁用，COM1，COM2，COM3，默认设置是COM1SATA Operation This option configures the operating mode of theinternal SATA hard drive controller. The settingsare Disabled, ATA, AHCI, and RAID On.Default setting: RAID On = SATA is configured tosupport RAID modeSATA Operation 设置选项：禁用，ATA ，AHCI 和Raid On默认设置是Raid On=SATA 设置支持Miscellaneous Use the check boxes to enable/disable thefollowing devices:∙Internal Modem∙Module Bay∙ExpressCard or PC Card∙Media Card, PC Card and 1394∙External USB Port∙Microphone∙eSATA Ports∙Hard Drive Free Fall Protection∙Camera / MicrophoneDefault setting: All enabled.请点击复选框启用/禁用下面设备：∙内置Modem∙模块设备∙ExpressCard 或PC Card∙SD卡, PC卡和1394∙外置USB口∙内置麦克风∙eSATA口∙自由落体硬盘保护∙摄像头/ 麦克风默认所有设备启用。
；This field lets you choose the operating mode ofthe Latitude On™；Reader.启用或禁用Latitude On Readeryour system's LCD panel based on the amount of light in the environment.Default setting: Disabled 自动根据周围环境改变显示器的亮度默认设置禁用。
LCD Brightness This option (represented by a slider bar for OnBattery and On AC) sets the panel brightnesswhen the ambient light sensor is off. 在环境观光器关闭时，可以分别设定连接电源或电池时显示器的亮度。
Security 安全设置Description 描述Admin Password This field lets you set, change, or delete theadministrator (admin) password (sometimescalled the "setup" password). The adminpasswaord enables several security featureswhen set including:∙Restricts changes to the settings in Setup∙Restricts the boot devices listed in theF12 Boot Menu to those enabled in the"Boot Sequence" field.∙Prohibits changes to the owner and assettags.∙Substitutes for the system password ifthe system prompts for a passwordduring power on.Successful changes to this password take effectimmediately.Default Setting: Not set 该页面可以设置，修改，或删除Admin了Admin密码将启用下面安全功能：∙限制改变BIOS设置∙限制F12启动菜单的设备∙禁止修改Owner和Asset∙在POST界面可以替代systempassword默认没有设置Admin 密码。
注意：如果删除Admin 密码，System删除。
Admin密码可以被使用去删除硬盘密码。
但是必须首先设置Admin密码；如果已经设置了System密码或硬盘密码，不能再设置码。
System Password system password (previously called the"Primary" password).Default Setting: Not set 前版本将Primary密码）默认没有设置System密码。
This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even when installed in another system.Default Setting: Not set 该页面可以设置，修改，或删除硬盘密码。