a run test to make sure its safe when driving
5 the car ship to 4S show room
6 you get your car
Finish!
Thank you!
Cao yuhui
2019.10.22
合作愉快
2011
4.8Assembly process总装工艺
before assem the engine and suspension system
4.9Assembly process总装工艺 workers asseming trocess总装工艺
workers asseming the engine and suspension system
Welding slag and burrs
3.1Coating process涂装工艺 put the body into anode
electrophoresis tank for coating
3.2Coating process涂装工艺 a car finished electrophoresis
4.5Assembly process总装工艺 assem the dashboard
4.6Assembly process总装工艺 a robot spread glue on the windshield
4.7Assembly process总装工艺
a robot spread glue on the windshield
4.3Assembly process总装工艺 every car must paste a paper to
show what model of this car
4.4Assembly process总装工艺 workers should assem wires and
decorations first, in bottom
Remark:
due to these photos are from different manufacturers, so do not surprise when you see different cars here
4.2Assembly process总装工艺 a car in the 1st position of A / W
2.1 Welding process焊装工艺 Welding robot weld the body
2.2Welding process焊装工艺 a worker welding a part
2.3Welding process焊装工艺 a girl welding a part
2.4Welding process焊装工艺 a worker check and remove
4.11Assembly process总装工艺 workers asseming tyres
4.12Assembly process总装工艺 the door assembly line
4.13Assembly process总装工艺 filling fuel and liquid here
3.3Coating process涂装工艺 a car been painting
3.4Coating process涂装工艺 final check for a coating body
4.1Assembly process总装工艺 a car ship to assembly workshop
4.14Assembly process总装工艺
raining test to make sure it won’t leak when raining
4.15Assembly process总装工艺 final check for paint and assem
4.16Assembly process总装工艺