基于FPGA误码检测器的设计与实现西安欧亚学院本科毕业论文(设计)开题报告题目基于FPGA误码检测器的设计与实现学生姓名: *****学生学号: 12610602150807指导教师:导师职称:所在分院: 信息工程学院专业: 通信工程班级: 统本通信1201班提交日期: 2015年12月21日备注:“指导教师意见”与“教研室意见”请在“□”内打“√”表示。
摘要随着通信测试技术的发展,对测试仪器也提出了更高的要求。
要求测试仪器软件化、智能化。
而且由于通信技术的迅速发展,通信测试仪器的价格比较昂贵,所以要求仪器开发商要考虑到测试仪器的功能问题及仪器的成本问题。
另外,小型化与便携化的思想就是通信测试仪器的两个重要发展趋势与方向。
鉴于网络通信监测具有移动性,要对同一通信网络不同测试点进行监测,对于测试点的物理距离比较远的通信网络,要求通信网络测试设备向小型化,便携化的两个方向发展。
手持式网络测试设备主要以现场施工以及运行维护使用为目的,不要求其测试功能的完善,但侧重于实用性与方便性。
误码测试仪主要基于FPGA技术,并且以方便,实用,经济三个方面为主要特点进行设计开发的。
它的核心器件就是现场可编程逻辑阵列(FPGA),便于移植或者升级。
FPGA就是目前应用比较广泛的可编程门阵列,如今很多数字通信系统都就是用FPGA作为系统的核心控制器件,不仅使系统的集成度大大提高而且降低了硬件设计的复杂程度。
所以,采用FPGA作为智能误码仪的核心控制器件就是比较合适的选择。
本论文在分析了误码仪工作原理的基础上,釆用FPGA等构建硬件平台,完成误码仪的功能。
用FPGA实现伪随机序列的收发与误码统计,然后通过数码管显示检测结果。
关键词:误码检测仪FPGA 伪随机码同步AbstractWith the rapid development of communication technology test, also put forward higher requirements for the test instrument、Requirement of intelligent instrument software、And because of the rapid development of communication technology, communication test instruments are expensive, the cost function and instrument so instrument developers to consider to test instruments、In addition, miniaturization and portability of the thought is the two important development trend and directionof communication testing instrument、In view of the network traffic monitoring with mobility, to monitor the same communication networks of different test points, for the physical distance between the test point is far from the communication network, communication network testing equipment to the miniaturization, portable two direction、The portable network test equipment to the main maintenance on-site construction and operation for the purpose, does not require the test function perfect, but focuses on the practicality and convenience、Intelligent error tester is mainly based on FPGA technology, and with convenient, practical, the three aspects of economy as the main characteristics of the design and development of the、It is the core component of field programmable logic array (FPGA), easy to transplant or upgrade、FPGA is widely used programmable gate array, now a lot of digital communication system is using FPGA as the core of the system control device, not only the system integration degree greatly improve and reduce the complexity of the hardware design、So, using FPGA as the core control device of intelligent error tester is a suitable choice、In this paper, based on the analysis of the principle of the error code, using FPGA, processor and other hardware platform to complete the function of the error tester、FPGA implementation of the pseudo random sequence of transceiver and error statistics, and then through the digital tube display detection results、Key Words : Error detecting instrument FPGA Pseudo random code Synchronization目录摘要.................................................................................................................................. Abstract ............................................................................................................................1、绪论 .....................................................................................................................- 0 -1、1研究目的及意义 ......................................................................................- 0 -1、2国内外研究现状 ......................................................................................- 0 -1、3本课题主要要求内容 ..............................................................................- 1 -2、系统的总体方案设计 .........................................................................................- 2 -2、1 EDA与VHDL介绍 ....................................................................................- 2 -2、1、1 FPGA发展历程...........................................................................- 2 -2、1、2 VHDL语言介绍...........................................................................- 4 -2、2总体方案设计, .........................................................................................- 5 -2、2误码率测试基本原理 ..............................................................................- 5 -2、3伪随机序列的原理及特点 ......................................................................- 7 -2、4硬件电路设计方案选择 ..........................................................................- 9 -3、功能设计 .............................................................................................................- 9 -3、1基本功能设计 ....................................................................................... - 10 -3、1、1伪随机码型发生单元设计 ..................................................... - 10 -3、1、2误码插入单元 ......................................................................... - 10 -3、1、3误码检测单元设计 ................................................................. - 11 -3、1、4同步模块 ................................................................................. - 12 -3、1、5显示模块 ................................................................................. - 13 -3、1、6模拟信道模块 ......................................................................... - 16 -3、2 顶层电路的设计 ...................................................................................- 17 -4、功能的仿真与验证 ...........................................................................................- 17 -4、1仿真验证 ................................................................................................- 17 -4、1、1伪随机码型发生单元设计 ............................................................. - 18 -4、1、2误码插入单元与模拟信道模块 ..................................................... - 18 -4、1、3误码检测单元设计 ......................................................................... - 18 -4、1、4同步模块 ......................................................................................... - 18 -4、1、5显示模块 ......................................................................................... - 19 -4、2整体仿真图 ........................................................................................... - 19 -4、3FPGA验证............................................................................................... - 19 -5、结论 ...................................................................................................................- 20 -参考文献................................................................................................................. - 21 -致谢......................................................................................................................... - 22 -1、绪论1、1研究目的及意义在当今的信息时代,通信在我们生活中必不可少。