当前位置:文档之家› 进出口贸易合同完整版

进出口贸易合同完整版

编号:TQC/K665进出口贸易合同完整版

In the case of disputes between the two parties, the legitimate rights and interests of the partners should be protected. In the process of performing the contract, disputes should be submitted to arbitration. This paper is the main basis for restoring the cooperation scene.

【适用合作签约/约束责任/违约追究/维护权益等场景】

甲方:________________________

乙方:________________________

签订时间:________________________

签订地点:________________________

进出口贸易合同完整版

下载说明:本协议资料适合用于需解决双方争议的场景下,维护合作方各自的合法权益,并在履行合同的过程中,双方当事人一旦发生争议,将争议提交仲裁或者诉讼,本文书即成为复原合作场景的主要依据。可直接应用日常文档制作,也可以根据实际需要对其进行修改。

本合同由abc公司,主营业所在中国xx(以下称甲方),与xyz公司,主营业所在美国xx(以下称乙方)于19xx年x月x日在中国xx签署

兹证明

鉴于乙方拥有现用于制造钢丝绳的机器设备,并愿意将机器设备卖给甲方

鉴于乙方同意购买甲方用已方提供的机器设备生的产钢丝绳,以补偿其机器设备的价

鉴于甲方向意向乙方出售钢丝绳,以

偿还乙方的机器设备价款;

因此,考虑到本协议所述的前提和约定,甲、乙双方物此立约:

1.购买协议

甲方同意从乙方按一下列条款购买下述商品:

1. 1商品、规格及其生产能力:

商品:

规格:

生产能力:

1.2 数量:2台。

1.3 价格:

xx港fob价:

单价:总价:

1.4 支付:

机器设备价款以甲方的产品--钢丝绳偿还,全部价款在边疆三年内平均三次付清,自xx日开始支付。

1.5 装运:

装运期:装运港:

目的港:装运唛头:

1.6 保险:

由甲方保险。

1.7 检验:

1.8 保证:

乙方保证其机器设备从未用这,性能先进,质量好,并保证该机器能生产xx规格钢丝绳,产量每小时xx米。

2. 销售协议

甲方以钢丝黾偿还购买乙方机器设备

的价款。

2.1 商品及规格:

商品:钢丝绳。

规格:

2.2 数量:

铡丝绳每年xx米。

2.3 价格:

钢丝绳的价格按交货时国际市场cif价确定

2.4 装运:

每年两次装运,一次在六月,另一次在十二月,每次货价为xx。

装运港:

目的港:

法语运唛头:

2. 5包装:

木卷轴装。

2.6支付:

凭以甲方为受益人的保兑的,不可撤销的即期信用证,允许转船。信用证必须于装运日期前15天到达甲方,有效期不少于90天。

信用证要与本合同完全一致,否则,乙对迟装负责;而且,甲方有机就其中的损失向乙方提出索赔。修改信用证的费用由乙方承担。

2. 7保验:

甲方保险,投保水渍险和战争险,投保金额为发票金额加10%

2.8 检验:

甲方出具的品技检验证书为最后依据。若货到后乙方发现质量与上述规定不符,乙方在货到目的港后45天内通知甲方,双方协商解决有争义的问题。

3. 不可抗力

若因不可抗力事故,甲方或乙方对未交或迟交本合同项下的部分或全部货物不负责任。

4. 仲裁

有关或执行本合同的一切争议应该友好协商解决。若达不成协议,有关争议案则提交xx仲裁。仲裁决定为终局的,并对双方均具有约束力。

5. 适用法律

本合同的签订,解释和履行以中华人

民共和国法律为准。

6. 正本条款

本合同以英文书写,正本两份,每方各持一份。

7. 有效期

甲方:乙方:

本处可输入公司或团队名字

THIS TEMPLATE IS DESIGNED BY FOONSHION

国际贸易合同(标准版)范本

Both parties jointly acknowledge and abide by their responsibilities and obligations and reach an agreed result. 甲方:___________________ 乙方:___________________ 时间:___________________ 国际贸易合同

编号:FS-DY-20276 国际贸易合同 贸易合同又称契约或合约,是进口出口双方当事人依照法律通过协商就各自的在贸易上的权利和义务所达成的具有法律约束力的协议。 国际贸易合同范本 合同编号:____ ____(售方)为一方,与____(购方)为另一方,签订合同如下: 第一条合同对象 依据____年__月__日双方签订的关于合作的协议,在售方国国境车上交货条件下售方售出,购方购入货物。其数量、种类、价格及交货期均按第__号附件办理,该附件为本合同不可分割的部分。 合同总金额为_____ 第二条价格

本合同所售出货物的价格以瑞士法郎计算,此项价格系卖方国国境车上交货,包括包皮、包装和标记费在内。 第三条品质 按本合同所售出货物的品质应符合中华人民共和国国家标准或原苏联国家标准,并符合本合同附件所规定的技术条件;凭样交货的商品品质应符合双方确认的样品。 商品质量应以售方国国家商品检验局出具的品质证明书证明之。 第四条供货期 售方应在本合同附件规定的期限内发货。在征得购方同意的情况下,售方有权按双方商妥的数量和金额提前交货。 第五条标记 每个货箱均应用防水颜料在箱体的三面(上面,前面和左右)用英、俄两种文字书写以下标记:合同号,收货人,箱号,毛重,净重。 第六条支付 本合同所供应的货物之价款,由购方按照中国银行和原苏联外经银行关于边境贸易支付协议书所规定的办法及——

国际贸易合同(中英文)

国际贸易合同(中英文)国际贸易货物买卖(中英文) CONTRACT OF GOODS PURCHASE Contract No.: 合同号: Date: 日期: The Buyer: 买方:

Address: 地址:Fax: 传真:Tel: 电话: The Seller: 卖方:Address: 地址:Fax: 传真:Tel: 电话:

1. COMMODITY AND PRICE 商品和价格 This Contract is made by and between the Buyer and the Seller; whereby the Buyer agrees to buy and the Seller agrees to sell the commodity and on terms and conditions stipulated below: 本合同由买卖双方订立,根据下列条款和条件买方同意购买且卖方同意出售下列商品: Item No. 序号 Commodity and specifications 商品和规格 Quantity数量

Unit Price + Price Term单价和价格术语 Total Amount in U.S.Dollar总价(美元) TOTAL value: USD (SAY U.S. DOLLAR ONLY)总金额:美元(大写美元整) 2. COUNTRY OF ORIGIN AND MANUFACTURERS: THE NETHERLANDS/ PHILIPS 原产国和制造商: 3. TIME OF SHIPMENT: 装运时间: The Seller agrees to exercise customary reasonable business practices to meet the Buyer s requested delivery dates set forth herein. The Buyer understands that shipping dates may depend upon site readiness and the Seller s prompt

国际贸易合同中英文对照版

编号:_______________ 本资料为word版本,可以直接编辑和打 印,感谢您的下载 国际贸易合同中英文对照版 甲方:___________________ 乙方:___________________ 日期:___________________

英文进口合同范本-- 合同编号(Contract No.): 签订日期(Date) : ________________

m 甘售 inr (signed a ° ________ __ The Buyer _________________________________________

Address- C >5H (T E _) -—— ________ f 火客a (E —ma=H ___________________________

卖方: The Seller: 地址: Address: 电话(Tel):_ 传真(Fax): 电子邮箱(E-mail):

买卖双方同意按照下列条款签订本合同: The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below: 1. 货物名称、规格和质量( Name, Specifications and Quality of Commodity ): 2. 数量(Quantity ): 允许的溢短装( % more or less allowed ) 3. 单价(Unit Price ): 4. 总值(Total Amount ):

国际贸易合同样本

国际贸易合同样本 国际贸易合同1 甲方(委托方): 地址: 法定代表人: 联系电话:传真: 手机:电子邮箱: 乙方(居间方): 地址: 法定代表人: 联系电话:传真: 手机:电子邮箱: 鉴于: 甲方为提高收购量,在各个国家需要寻找适当的供应商。乙方愿意介绍客户给甲方。如果乙方完成甲方委托的成交事项,甲方愿意支付相应报酬。乙方与客户间报价的差价之部分归乙方所有。为了明确各方责任,经甲、乙双方友好协商,达成如下协议,供双方遵照执行,以资信守: 第一条委托事项 乙方接受甲方委托,在寻找的供应商,并促成甲方与该供应商签订有关的购买事宜。

第二条居间期限:(可不可以是永久的?) 第三条佣金/差价计算方式、支付期限与支付办法 如果乙方接受甲方委托后,为甲方找到了合适的供应商,并促成双方签订了购买合同或直接交易,那么甲方应当向乙方支付相应报酬。该报酬的具体计算方式为: (1)差价:甲方公司与乙方介绍的客户签订业务合同为准,合同编号:号,客户名称: 乙方所介绍的客户销售价格每吨元,乙方即获取价格每吨元的差价. (2)居间服务报酬的支付时间为:甲方公司发出订单后,与客户签定合同后,以该合同上规定客户发货时间和货物实际到达时间为准,往后计算三天,在该三天内甲方必须向乙方支付居间服务报酬和差价金额部分。 居间服务报酬和差价金额支付办法为:甲方应根据乙方的要求,将有关款项支付到乙方指定的银行账户。 帐号: 户名: 第四条居间费用的负担: 乙方促成合同成立的,居间活动的费用由乙方负担;未促成合同成立的,甲方应向乙方支付必要费用壹千元人民币第五条甲方的权利与义务 1、甲方有权要求乙方提供客户的有关资料;

进出口贸易合同样本3篇

进出口贸易合同样本3篇 合同为一种合意,依此合意,一人或数人对于其他一人或数人负担给付某物、作为或不作为的债务”,今天小编就给大家看看贸易合同,希望大家来阅读哦! 进出口贸易合同样本1 买方: 电报: 卖方: 电报: 电传: 本合同由买卖双方商订,在合同项下,双方同意按下列条款买卖下述商品; 第一条品名、规格、数量及单价 第二条合同总值 第三条原产国别及制造厂商 第四条装运港

第五条目的港 第六条装运期 分运: 转运: 第七条包装 所供货物必须卖方妥善包装,适合远洋和长途内陆运输,防潮、防湿、防震、防锈,耐野蛮装卸,任何由于卖方包装不善而造成的损失由卖方负担。 第八条麦头 卖方须用不褪色油漆于每件包装上印刷包装编号、尺码、毛重、净重、提吊位置及“此端向上”、“小心轻放”、“切勿受潮”等样及下列麦头: 麦na 第九条保险 转运后由买方投保。 第十条付款条件

1、买方在收到备货电传通知后转运期前30天,开立以卖方为受益人的不可撤销售信用证,其金额为合同总值的%,计。中国银行行收到下列单证经核对无误后,承付信用证款项:全套可议付已装船清洁海运提单,外加两套副本,注明“运费待收”,空白台头,空白背书,已通知到货口岸中国对外贸易运输公司。 商业发票一式五份,注明合同号,信用证号和麦头。 装箱单一式四份,注明每包货物数量、毛重和净重。 由制造厂家出具并由卖方签署的品质证明书一式三份。 提供全套技术文件的确认书一式两份。 装运后即刻通知买方启运日期的电报/电传副本一份。 2、卖方在装船后10天内,须挂号航空邮寄三套上述文件,一份寄买方,两份寄目的港中国对外贸易运输公司。 3、中国银行收到合同中规定的、经双方签署的验收证明后,承付合同总值的%,金额为。 4、买方在付款时,有权按合同第1 5、18条规定扣除应由卖方支付的延期罚款金额。

国际贸易合同(英文版)

?INTERNATIONAL SALES CONTRACT Contract No:0616 Conclusion Date: November 7th , 2009 Conclusion Place: Zhongxin digital Building,Beijing,China The Buyer: Great World Store,Newyork ,America TEL:01188745608002 The Seller:Gome Home Appliance Company, Beijing,China TEL:86-010-******** The Seller agrees to sell and the buyer agrees to buy the undermentioned commodity according to the terms and conditions stated below: (1) Name of Commodity: Haier refrigerator Product description: (a) model number:BCD—226STV (b)About the exterior appreance: total volume(L):226 power comsumption(kW.h/24h):0.6 effective area of freezer:58 effective area of variable greenhouse:43 effective area of storage room:125 dimentions(L*W*H):580*560*1786mm

国际贸易合同的主要内容(完整版)

合同编号:YT-FS-8069-45 国际贸易合同的主要内容 (完整版) Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity

国际贸易合同的主要内容(完整版) 备注:该合同书文本主要阐明合作框架下每个条款,并根据当事人一致协商达成协议,同时也明确各方的权利和义务,对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 国际贸易合同的具体内容因各个交易的具体情况 不同而不同。而且,在以信件、电报或电传形式签订 合同时,合同的内容常常可能并不十分规范。但是, 一般而言,可以把国际贸易合同的主要内容归纳如下 1、货物的品质规格条款 货物的品质规格是指商品所具有的内在质量与外 观形态法。商品质条款的主要内容是品名、规格或牌 名法。合同中规定品质规格的方法有两种:凭样品和 凭文字与图样法。 2、货物的数量条款 数量条款的主要内容是交货数量、计量单位与计 量方法。制定数量条款时应注意明确计量单位和度量 衡制度法。 在数量方面,合同通常规定有“约数”,但对“约

数”的解释容易发生争议,故应在合同中增订“溢短装条款”,明确规定溢短装幅度,如“东北大米500公吨,溢短装 3%”,同时规定溢短装的作价方法法。 3、货物的包装条款 包装是指为了有效地保护商品的数量完整和质量要求,把货物装进适当的容器法。包装条款的主要内容有:包装方式、规格、包装材料、费用和运输标志法。 制定包装条款要明确包装的材料、造型和规格,不应使用“适合海运包装”、“标准出口包装”等含义不清的词句法。 4、货物的价格条款 价格条款的主要内容有:每一计量单位的价格金额、计价货币、指定交货地点、贸易术语与商品的作价方法等法。 为防止商品价格受汇率波动的影响,在合同中还可以增订黄金或外汇保值条款,明确规定在计价货币币值发生变动时,价格应作相应调整法。

国际贸易合同中英文版本

SALES CONTRACT 销售合同 Con tract No.: 合同号: Date: 日期 Seller:卖方 Tel: Fax: Buyer: 买方 This Sales Con tract is made out as per the followi ng terms/c on diti ons mutually con firmed: NOTE: 1. Thermal bla nket is n ecessary for dry container at any time duri ng a year. Otherwise the Buyer has the right to retur n the cargo or refuse the payme nt for cargos in flue need by hot temperature. 干柜在一年中的任何时候都需隔热层,否则买方有权退回货物或拒绝为因高温造成影响的货物付款。 2. In sura nee: To be effected by the seller for 110% of full in voice value coveri ng marine in stitute cargo clauses All Risks. 保险:由卖方按发票全额的110%购买涉及海洋协会货物保险条款一切险” 3. Time of Shipment: before 15 th July, Partial shipment is not allowed. 发货时间:7月15日之前,不允许分批装运。 4. Port of Shipme nt: Livor no 装运港:利沃诺 5. Port of Dest in atio n: Wuha n, Chi na. 目的港:中国武汉 st 6. Time of arrival at the desti nati on port: before 1 September . 到达时间:9月1日前抵达目的港。 7. Terms of Payme nt: T/T 90 days after B/L date

对外贸易合同中英文对照实用版

YF-ED-J7602 可按资料类型定义编号 对外贸易合同中英文对照 实用版 An Agreement Between Civil Subjects To Establish, Change And Terminate Civil Legal Relations. Please Sign After Consensus, So As To Solve And Prevent Disputes And Realize Common Interests. (示范文稿) 二零XX年XX月XX日

对外贸易合同中英文对照实用版 提示:该合同文档适合使用于民事主体之间建立、变更和终止民事法律关系的协议。请经过一致协商再签订,从而达到解决和预防纠纷实现共同利益的效果。下载后可以对文件进行定制修改,请根据实际需要调整使用。 合同编号:__________ 签订日期:__________ 签订地点:__________ 电话:_____________ 传真:_____________ 电报:_____________ 电传:_____________ 电话:_____________ 传真:_____________ 电报:______________ 电传:______________

经买双方确认根据下列条款订立本合同: 1.货号 artno.名称及规格 descriptions单位 unit数量 quantity单价 unitprice金额 合计:_______________ 总值(大写)_______ 允许溢短___% 2.成交价格术语:□fob□cfr□cif□ddu □ 3.包装:______________ 4.装运码头:__________ 5.运输起讫:由______经______到

国际贸易合同(标准版)范本

The obligee in the contract can accomplish the goal in a certain period by discussing the agreed rights and responsibilities. 甲方:___________________ 乙方:___________________ 时间:___________________ 国际贸易合同

编号:FS-DY-69398 国际贸易合同 其他合同范本由提供,请详细参考; 本协议于_____年_____月_____日签订,协议双方为:_____(卖方名称),系根据a国法律正式组成并存在的公司,设于_____(卖方地址)(以下称“卖方”)和_____国_____股份有限公司,系根据_____国法律正式组成并存在的公司,设于_____(地址),(以下称_____)。 鉴于“卖方”愿意发展他在_____(生产地)和其他国家制造的、并以他的商标和专名销售的产品的出口业务; 鉴于“卖方”愿委任_____作为他的独家经销商,按照本协议中的条款销售此种产品; 为此,考虑到双方在本协议中所作的诺言和所商定的各条款,并考虑到下面所提出的,双方声明已经同意的,相互之间的其他有效对价,特订立协议如下: 第一条定义

一、产品:本协议中所称“产品”,系指“卖方”制造并以其商标和专名销售的产品(产品名称)。 二、地区:本协议中所称“地区”,系指_____(地区名)和随时经双方以书面同意的其他地区。 三、商标和专名:本协议中所称“商标”和“专名”,系分别指_____(商标的全称和专名的全称)。 第二条经销权 “卖方”兹给予_____以独家进口,并以“商标”和“专名”向“地区”内客户销售“产品”的权利。 第三条专营权 一、交易:“卖方”不得将“产品”售予、让予或以其他方式使“地区”内_____以外的任何个人、行号或公司取得“产品”。 二、委任:“卖方”不得委任“地区”内_____以外的其他个人、行号或公司作为其经销商、代表人或代理人,以进口和销售“产品”。 三、询购:“卖方”收到“地区”内任何客户有关“产品”的询购,均应交给_____。 四、再进口:“卖方”应采取适当措施防止他人在“地区”

国际贸易进出口英文合同范本

国际贸易进出口英文合同范本 SALES CONTRACT ( ORIGINAL ) Contract No. Date: Signed at: Sellers: Address: Tel: Fax: E-mail: Buyers: Address: Tel: Fax: E-mail: 约首:This Sales Contract is made by and between the Sellers and the Buyers whereby the Sellers agree to sell and t he Buyers agree to buy the under—montioned goods ac cording to the terms and conditions stipulated below: 唛头:Shipping Mark

To be designated by the Sellers / At the Sellers’ option. 保险条款:Insurance 在FOB, CFR 合同下,保险条款可订为: Insurance to be covered by the Buyer. 在CIF 合同下,保险条款可订为: Insurance to be covered by the Sellers for 110% of the invoice value against W.P.A / All Risks / War Risk including shortage in weight as per and subj ect to the Ocean Marine Carge Clauses of the People’s Insurance Company of China dated Jan. 1, 1981. If other coverage or an additional insurance is required, the Buyers must have the consent of the Sellers before shipment, a nd the additional premium is to be borne by the Buyers. 装运条款:Shippment Time of Shipment: during Feb./Mar. 2005 in two equal monthly lots Port of loading / shipment : Port of destination :London. Transhipment at HongKong allowed. The carrying vessel shall be provided by the sellers. Partialshipment an d transshipment ar e allowed. After loading is completed, the seller sh all notify the buyers by cable of the contract number, name of comm odity, name of the carring vessel and date of shipment. 付款条件:Terms of Payment The Buyers shall open with a acceptable to the Sellers an Irrevocable Sight Letter of Credit to reach the Sellers 30 days before the month of shipment, valid for negotiation in China until the 15th day after th e month o f shipment. ( Export ) By Irrevocable Letter of Credit for 90% the total invoice value of the goods tb be shipped, in favour of the Sellers, payable at the issuing bank against the Sellers’ draft at sight accompanied by the shipping d ocuments stipulated in the Credit. The balance of 10% of the proceed s is to be paid only after the goods have been inspected and approve

国际贸易进出口合同模板

国际贸易进出口合同模板 NO.: 26102 DATE: xx.10.31 ADDRESS :15th Road New York USA TEL:+014857698 FAX: 26370809 买方: 地址: ADDRESS:19 Chang An Road Xi’an shanngxi China TEL: 88265860 FAX: 764869327 This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned modity aording to the terms and conditions stipulated below:

买方与卖方就以下条款达成协议: CONTRACT 2. COUNTRY AND MANUFACTURERS: 原产国及制造商:Made in China & LYZ Company 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the modity and expenses incurred on aount of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing. 包装:标准空运包装。如果由于不适当的包装而导致的货物损坏和由此产生的费用,卖方应对此负完全的责任。 4. SHIPPING MARK: The Sellers shall mark on each package with fadeless paint the package number, gross weight, weight, measurement and the

国际贸易购销合同中英文

Sales Contract 国际购销合同 编号(Contract No):SDAUP-01 日期( Date) :JULY 28TH, 2015 Buyers:XXXXXXXXXXX Address:XXXXXXXXX ALGERIE TEL/FAX:033XXXXXXXXXXX NIF:00XXXXXXXXXXXXXXX Sellers: Address: Tel:Fax: Beneficiary Bank: BANK OF CHINA, JINAN SHENGFUQIANJIE SUBBRANCH 开户行: 中国银行xxxxxxx行 Account number: XXXXXX 账号:xxxxxxxxxxxxxxx SWIFT:BKCHCNBJ51B Through friendly negotiation, buyer and seller have entered into this contract, as the following stipulated terms and condition. 买卖双方通过友好协商,就以下条款达成合同。 http://biz.doczj.com/doc/ad8548613.html,modity : spare parts , total amount is USD four hundred fifty thousand only . 商品:汽车配件。总价:美金肆拾伍万圆整。。 2.Packing: To be packed as export standard suitable for long distance ocean freight transportation. 包装:以适合长距离海运出口标准包装。 3. Shipping mark: The Buyer shall inform the Seller fifteen (10) days prior to the shipment if any shipping mark may be required, otherwise the Seller shall consider no need shipping mark. 买方应于装船前10天通知卖方是否需要唛头,否则视为不需要。 4.Insurance:To be covered by the_buyer_for 100% of the invoice value against_ocean marine _. 保险;由 买方负责,按本合同总值100%投保__海运_险。 5. Intended ports of shipment: Qingdao, China. 装运港口:中国青岛 6. Port of destination: ANNABA,ALGERIA 目的港:阿尔及尔港 7.Shipping documents: The Seller shall present the following documents.

最新对外贸易合同范本

对外贸易合同范本 合同编号: _________ 签订日期: _________ 签订地点: _________ 卖方: _________ 买方: _________ 经买双方确认根据下列条款订立本合同: 1、 允许溢短 _________ % 2、成交价格术语: __________ 3、包装: _________ 4、装运唛头: _________ 5、运输起讫:由 _________ 经_________ 到 6、转运:允许不允许;分批装运:允许不允许 7、装运期: _________ &保险:由 __________ 发票金额110%投保_____________ ,另加保_________ 至___________ 止. 9、付款条件: 买方不迟于 _______ 年__________ 月_________ 日前将 100%的

货款用即期汇票/电汇送抵卖方. 买方须于 ____________ 年__________ 月___________ 日前通过艮行开出以卖方为受益人的不可撤销期信用证,并注明在上述装运日期后在中国议讨有效,信用证 须注明合同编号. 付款交单:买方应对卖方开具的以买方为付款人的见票后付款跟单汇票,付款时交单. 承兑交单:买方应对卖方开具的以买方为付款人的见票后承兑跟单汇票,承兑时交单. 10、单据:卖给方应将下列单据提交银行议付/托收. 整套正本清洁提单. 商业发票一式 ________ 份. 装箱单或重量单一式 _________ 份. 由 ________ 发的质量与数量证明书一式__________ 份. 保险单一式 ________ 份. 由 ________ 发的产地证一式___________ 份. 11、装运通知:装运完毕,卖方应即电告买方合同号、品名、已 装载数量,发票总金额,毛重,运输工具名称及启运日期等. 12、检验与索赔: 卖方在发货前由 ________ 检验机构对货物的品质、规格和数量 进行检验,并出具检验证明书. 货物到达目的的口岸后,买方可委托当地的商品检验机构对货物进行

国际贸易合同范本(中英文版)

国际贸易合同 买方(The Buyer) :__________________________ 卖方(The Seller) : ___________________________

签订日期(Date) :________ 年_____ 月 ___ 日

签字日期Signing Date: 买方The Buyer: 地址Address: 电话Tel : 卖方The Seller: 地址Address: 电话Tel : This Con tract, made out by and betwee n the Buyer and the Seller, whereby the Buyer agree to buy and the Seller agree to sell the un der-me nti oned commodity according to the terms and conditions stipulated below.(According to the practical price of in voice) 本合同由买方和卖方签订,根据下面规定的条款,买方同意购买并且卖方同意销售如下商品(根据发票的实际金额)。 1. Commodity,Specifications: 原产地和制造商:

3. TRANSPORTATIONMari ne refrigerated co ntai ner tran sportati on. 运输方式:海洋冷藏集装箱运输。 4. PACKING: To be packed by new strong woode n cases suitable for long dista nee ocea n tran sportati on and well protected aga inst damp ness, moisture, shock, rust and rough han dli ng. The Seller shall be liable for any damage of the commodity and expe nses in curred on acco unt of improper pack ing and for any rust damage attributable to in adequate or improper protective measures take n by the sellers in regard to the pack ing. 包装:须用坚固的新木箱包装,适合长途海运,防湿、防潮、防震、防锈,防粗暴搬运。 由于包装不良所发生的损失,或采用不妥善的防护措施而造成的任何锈损,卖方应负担 由此而产生的一切费用和损失。 5. SHIPPING MARK: The Seller shall mark on each package with faceless paint the package number, gross weight, net weight, measureme nt and the wordi ngs: "RIGHT SIDE UP", "HANDLE WITH CARE", "KEEP AWAY FROM MOISTUE", and the shippi ng mark. 卖方应在每件包装箱上用不褪色的油漆刷上箱号、毛重、净重、尺码和“勿倒置”,“小 心轻放”,“防潮”等字样。 6. TIME OF TRANSPORTATIONBEFORE 装货时间:年月日之前。

进出口贸易合同样本

篇一:[国际贸易实务]进出口贸易合同样本 no.: 26102 date: 2010.10.31 address:15th road new york usa tel:+014857698fax: 26370809 买方: 地址: address:19 chang an road xi’an shanngxi china tel: 88265860 fax: 764869327 买方与卖方就以下条款达成协议: contract 2. country and manufacturers: 3. packing: 包装:标准空运包装。如果由于不适当的包装而导致的货物损坏和由此产生的费用,卖方应对此负完全的责任。 4. shipping mark: the sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: keep away from moisture handle with care this side up etc. and the shipping mark: 唛头:卖方应用不褪色的颜料在每个箱子外部 刷上箱号、毛重、净重、尺寸,并注明“防潮”、 “小心轻放”、“此面向上”等,唛头为: 5. time of shipment(装运期): within 30 days after receipt of l/c 6. airport of shipment(装运场):上海 7. airport of destination(目的场):, china 8. insurance(保险):to be covered by sellers for 110% invoice value against all risks. 9. payment(付款方式)the buyer open an irrevocable 100% l/c at sight in favor of seller 信用证付款:买方给卖方开出100%不可撤销即期信用证。 银行资料: 10. documents:单据 1. full set of air waybill in original showing “freight prepaid” and consigned to applicant. 空运提单一套 2. invoice in three copies. 发票一式叁份 3. packing list in three copies issued by the sellers. 装箱单一式叁份 4. certificate of quality issued by the sellers. 制造厂家出具的质量证明书 5. insurance policy. 保险单一份 6. certificate of origin issued by the sellers. 原产地证书 7. manufacturer’s certified copy of fax dispatched to the applicant within 24 hours after shipment advising flight no., b/l no., shipment date, quantity, gross weight, net weight, and value of shipment. 制造厂家通知开证申请人有关货物装运的详细资料传真复印件壹份 8. the seller’s certificate and waybill certifying that extra documents have been dispatched according to the contract terms by express airmail. 卖方有关另外用特快邮寄壹套单据给开证申请人的证明书及邮寄底单.

国际贸易合同英文版

THE BUYERS:THE SELLERS: ADDRESS:ADDRESS: TEL:TEL: FAX:FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing. 4. SHIPPING MARK:

The Sellers shall mark on each package with fadeless paint the package number,gross weight, net weight, measurement and the wordings: "KEEP AWAY FROM MOISTURE" "HANDLE WITH CARE" "THIS SIDE UP" etc. and the shipping mark. 5. TIME OF SHIPMENT: 6. PORT OF SHIPMENT: 7. PORT OF DESTINATION: 8. INSURANCE:To be covered by sellers for 110% invoice value against All Risks. 9. PAYMENT:The buyer open an irrevocable 100% L/C at sight in favor of seller. 10. DOCUMENTS: (1). Full set of Air waybill in original showing “Freight Prepaid” and consigned to applicant. (2). Invoice in three copies. (3). Packing list in three copies issued by the Sellers. (4). Certificate of Quality issued by the Sellers. (5). Insurance Policy. (6). Certificate of origin issued by the Sellers.

相关主题