当前位置:文档之家› 电池可靠性测试

电池可靠性测试


0V Prohibition /allowance YES 0V 充电禁止/容许
Content 内容 Over charge detection voltage 过充保护电压 0.96~1terion 标准 4.28±0.025V
Over discharge detection voltage 3.0±0.05V 过放保护电压 115~173ms 3.0±0.1V Over current detection current 过流保护电流 11.0ms(MAX) 1.0~3.0A
Item 项目 Over charge Protection 过充保护 tVDET1 VREL1 VDET1
Syol 符号
Over charge detection delay time 过充保护延迟时间 Over charge release voltage 过充恢复电压
Over discharge protection VDET2 过放保护 tVDET2 VREL2 Over current protection 过流保护 tVDET3 Release condition 恢复条件 Short protection 短路保护 TSHORT Release condition 恢复条件 Interior resistance 内阻 Current consumption 工作消耗 Over discharge detection delay time 过放保护延迟时间 Over discharge release voltage 过放恢复电压 IDP Detection delay time 延迟时间 Cut load Detection condition 检测条件 Detection delay time 短路延时 Cut short circuit RDS IDD
Exterior short circuit 220~380μs
Main loop electrify resistance 回路内阻 Current consume in 工作消耗电流 normal operation
VC=4.2V; RDS≤80m Ω 7.0μA Max
相关主题