小型电动遥控直升机制作
小型电动遥控直升机(微型直升机)制作 以下文章
是通过google翻译所得: Little tips about building your
own RC helicopter Flying RC helicopter is really very
exhilarating. Their versatility gives a RC pilot a complete access
to the three-dimensional space in such a way that no other
machines can! I have played RC helicopter for more than one
year but still find that I have just learnt a few tricks that it can
perform. There are generally two micro-helicopters
( indoor ) in the RC market. I have already planned to buy one
of them as they can fly inside the living room and even take off
on ours hand. Unlike those operated by gas, these electric
helicopters are very clean and give out no terrible noise at all. In
one nightfall, I visited a web site, which is about how to make a
hand made RC helicopter. I was totally impressed and started
designing my own helicopter. Here is my helicopter: 小秘
诀是关于建立您自己的钢筋混凝土遥控直升机 飞行区
局的直升机，实在是非常令人振奋的。他们的多才多艺给出
了钢筋混凝土试验一个完整的获得三个三维空间，在这样一
种方式没有其他机器可以！我有发挥的遥控直升机以上的一
年，但仍然觉得我刚才已经学到了一些技巧，它可以执行。
有一般两个微型遥控直升机（室内），在钢筋混凝土市场。
我已计划购买其中一人，因为他们可以乘飞机内的客厅，甚
至起飞，对我们的手。不像那些经营的气体，这些电动遥控
直升机，是很干净，并给予指出并没有可怕的噪音在所有。
在一入夜，我访问了一个网站，这是有关如何制作手工钢筋
混凝土直升机。我是完全的印象，并开始设计自己的遥控直
升机。这里是我的直升机 The plan of the
helicopter had finally been completed. It is not very well drew.
The current plan available is only for the fixed pitch design.
Please click the above photo for the plan. 该计划的直升
机终于完成。这不是很好的提请。根据目前的计划，可仅适
用于固定摊位的设计。请按上述照片的计划。 Length
410mm Height 150mm Flying Weight
250g (include 700mAh battery pack) Control system
Hiller control system / fixed pitch Main rotor diameter
490mm Tail rotor span 146mm Transmission
rate 1:18 (main rotor) 1:3.5 (tail rotor) Power
speed 300 motor (main rotor) tail boom 280mm
receiver GWS R4P ( 4 channel, 3.8g ) ESC Jeti
05 ( main rotor, 5A, 9g ) JMP-7 ( tail rotor, 4A, 0.7g )
Gyro GWS-PG-03 ( 7g with case ) servo Hitec
HS-50 * 2 ( 0.09sec/60° , 0.6kg/cm, 5.8g ) Battery
Sanyo 700mAh * 7 ( 90g )