(1)
UNIT V °C °C °C/W °C
(V–) – 0.7 to (V+) + 0.7 Continuous –55 to 125 –55 to 125 TJA TJC 150 39 300
Operating Temperature Storage Temperature Junction Temperature
Copyright © 2011 年, Texas Instruments Incorporated
OPA2234M
ZHCS070 – 2 月 2011 年
ELECTRICAL CHARACTERISTICS: VS = 5 V (continued)
At TA = –55°C to 125°C, VS = 5 V, RL = 10 kΩ connected to VS/2, and VOUT = VS/2, unless otherwise noted.
Copyright © 2011 年, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Wafer-level tested to 95% confidence level. Positive conventional current flows into the input terminals. See Small-Signal Overshoot vs Load Capacitance typical curve. 3
产品 OPA2234MDR (1) 封装 SO-8 表面贴装型封装 封装标识 2234M
有关最新的封装和订购信息，请参阅本数据手册未尾的“封装选择方案附录”。
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
VALUE Supply Voltage, V+ to V– Input Voltage Output Short-Circuit
English Data Sheet: SGDS040
OPA2234M
ZHCS070 – 2 月 2011 年
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
4
Copyright © 2011 年, Texas Instruments Incorporated
OPA2234M
ZHCS070 – 2 月 2011 年
ELECTRICAL CHARACTERISTICS: VS = 2.7 V
At TA = –55°C to 125°C, VS = 2.7 V, RL = 10 kΩ connected to VS/2, and VOUT = VS/2, unless otherwise noted.
ZHCS070 – 2 月 2011 年
ELECTRICAL CHARACTERISTICS: VS = 5 V
At TA = –55°C to 125°C, VS = 5 V, RL = 10 kΩ connected to VS/2, and VOUT = VS/2, unless otherwise noted.
PARAMETER OFFSET VOLTAGE Input Offset Voltage vs Temperature (1) vs Power Supply vs Time Channel Separation (Dual) INPUT BIAS CURRENT Input Bias Current (2) Input Offset Current NOISE Input Voltage Noise Density Current Noise Density INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain FREQUENCY RESPONSE Gain-Bandwidth Product Slew Rate Settling Time: 0.1% 0.01% Overload Recovery Time OUTPUT Voltage Output: Positive Negative Positive Negative Short-Circuit Current Capacitive Load Drive (Stable Operation) (3) POWER SUPPLY Specified Operating Voltage Operating Voltage Range Quiescent Current (per amplifier) IQ (1) (2) (3) IO = 0 2.7 250 5 36 550 V V μA ISC G=1 RL = 10 kΩ to VS/2 RL = 10 kΩ to VS/2 RL = 10 kΩ to Ground RL = 10 kΩ to Ground (V+) – 1 0.25 (V+) – 1 0.1 (V+) – 0.65 0.05 (V+) – 0.65 0.05 ±11 1000 V V V V mA pF G = 1, 3 V Step, CL = 100 pF G = 1, 3 V Step, CL = 100 pF (VIN) (Gain) = VS 15 25 16 μs μs μs GBW SR CL = 100 pF 0.35 0.2 MHz V/µs AOL RL = 10 kΩ, VO = 0.25 V to 4 V RL = 2 kΩ, VO = 0.5 V to 4 V 78 75 120 96 dB dB VCM = 2.5 V 107 || 5 1010 || 6 Ω || pF Ω || pF CMRR VCM = 0.5 V to 4 V 0.5 86 106 (V+) – 1 V dB Vn In IB IOS VCM = 2.5 V VCM = 2.5 V f = 1 kHz 25 80 nV/√Hz fA/√Hz –15 ±1 –35 ±12 nA nA VOS dVOS/dT PSRR TA = 25°C, VCM = 2.5 V VCM = 2.5 V Operating Temperature Range VS = 2.7 V to 30 V, VCM = 1.7 V ±3 3 0.2 0.3 20 ±40 ±100 ±600 μV μV/°C µV/V μV/mo μV/V TEST CONDITIONS MIN TYP MAX UNIT
PARAMETER TEMPERATURE RANGE Specified Range Operating Range Storage Thermal Resistance θJA –55 –55 –55 150 125 125 125 °C °C °C °C/W TEST CONDITIONS MIN TYP MAX UNIT
OPA2234M
ZHCS070 – 2 月 2011 年
低功耗、精密 单电源运算放大器
查询样品: OPA2234M
1
特性
• 宽电源范围： – 单电源： VS = 2.7 V 至 36 V – 双电源： VS = ±1.35 V 至 ±18 V 规定性能： – 2.7 V、5 V、和 ±15 V 低静态电流：每个放大器为 250 μ A 低输入偏置电流：35 nA（最大值） 低失调电压：100 μ V（典型值） 高 CMRR、PSRR、和 AOL 双通道版本