{
LCD_Write(LCD_COMMAND, 0x04|InputMode);
}
//初始化LCD************************************************************
void LCD_Initial()
{
LcdEn=0;
LCD_Write(LCD_COMMAND,0x38); //8位数据端口,2行显示,5*7点阵
#define LCD_AC_UP0x02
#define LCD_AC_DOWN0x00 // default
#define LCD_MOVE0x01 //画面可平移
#define LCD_NO_MOVE0x00 //default
void LCD_SetInput(unsigned char InputMode)
sbit Set = P2^0; //模式切换键
sbit Up = P2^1; //加法按钮
sbit Down = P2^2; //减法按钮
sbit out = P2^3; //立刻跳出调整模式按钮
sbit DQ = P3^0;
char done,count,temp,flag,up_flag,down_flag,t_value;
}
Time->DateString[4] = '/';
if(hide_month<2)
{
Time->DateString[5] = Time->Month/10 + '0';
{ if(hide_year<2) //这里的if,else语句都是判断位闪烁,<2显示数据,>2就不显示,输出字符串为2007/07/22
{
Time->DateString[0] = '2';
Time->DateString[1] = '0';
Time->DateString[2] = Time->Year/10 + '0';
Time->DateString[3] = Time->Year%10 + '0';
}
else
{
Time->DateString[0] = ' ';
Time->DateString[1] = ' ';
Time->DateString[2] = ' ';
Time->DateString[3] = ' ';
sbit LcdRs= P2^5;
sbit LcdRw= P2^6;
sbit LcdEn= P2^7;
sfr DBPort= 0x80;//P0=0x80,P1=0x90,P2=0xA0,P3=0xB0.数据端口
//内部等待函数**************************************************************
#include <REG51.H>
#include <intrins.h>
//#include "LCD1602.h"
//#include "DS1302.h"
#define uint unsigned int
#define uchar unsigned char
sbit DS1302_CLK = P1^7; //实时时钟时钟线引脚
}
//液晶字符输入的位置************************
void GotoXY(unsigned char x, unsigned char y)
{
if(y==0)
LCD_Write(LCD_COMMAND,0x80|x);
if(y==1)
LCD_Write(LCD_COMMAND,0x80|(x-0x40));
unsigned char LCD_Wait(void)
{
LcdRs=0;
LcdRw=1;_nop_();
LcdEn=1;_nop_();
LcdEn=0;
return DBPort;
}
//向LCD写入命令或数据**************************************
#define LCD_COMMAND0 // Command
#define LCD_DATA1 // Data
#define LCD_CLEAR_SCREEN0x01 //清屏
#define LCD_HOMING0x02 //光标返回原点
void LCD_Write(bit style, unsigned char input)
{
LcdEn=0;
LcdRs=style;
LCD_Write(LCD_COMMAND,0x38);
LCD_SetDisplay(LCD_SHOW|LCD_NO_CURSOR); //开启显示,无光标
LCD_Write(LCD_COMMAND,LCD_CLEAR_SCREEN); //清屏
LCD_SetInput(LCD_AC_UP|LCD_NO_MOVE); //AC递增,画面不动
void LCD_SetDisplay(unsigned char DisplayMode)
{
LCD_Write(LCD_COMMAND, 0x08|DisplayMode);
}
//设置输入模式************************************************************
{
unsigned char ucData;
DS1302_RST = 0;
DS1302_CLK = 0;
DS1302_RST = 1;
DS1302InputByte(ucAddr|0x01); //地址，命令
ucData = DS1302OutputByte(); //读1Byte数据
DS1302_CLK = 1;
ReadValue = Read1302(DS1302_HOUR);
Time->Hour = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_DAY);
Time->Day = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
{
unsigned char Second;
unsigned char Minute;
unsigned char Hour;
unsigned char Week;
unsigned char Day;
unsigned char Month;
unsigned char Year;
unsigned char DateString[11];
{
unsigned char i;
ACC = d;
for(i=8; i>0; i--)
{
DS1302_IO = ACC0;//相当于汇编中的RRC
DS1302_CLK = 1;
DS1302_CLK = 0;
ACC = ACC >> 1;
}
}
unsigned char DS1302OutputByte(void)//实时时钟读取一字节(内部函数)
unsigned char TimeString[9];
}SYSTEMTIME;//定义的时间类型
#define AM(X)X
#define PM(X)(X+12)//转成24小时制
#define DS1302_SECOND0x80 //时钟芯片的寄存器位置,存放时间
#define DS1302_MINUTE0x82
ReadValue = Read1302(DS1302_WEEK);
Time->Week = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_MONTH);
Time->Month = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
#define DS1302_HOUR0x84
#define DS1302_WEEK0x8A
#define DS1302_DAY0x86
#define DS1302_MONTH0x88
#define DS1302_YEAR0x8C
void DS1302InputByte(unsigned char d)//实时时钟写入一字节(内部函数)
{
DS1302_RST = 0;
DS1302_CLK = 0;
DS1302_RST = 1;
DS1302InputByte(ucAddr);//地址，命令
DS1302InputByte(ucDa);//写1Byte数据
DS1302_CLK = 1;
DS1302_RST = 0;
}
unsigned char Read1302(unsigned char ucAddr)//读取DS1302某地址的数据
}
//将字符输出到液晶显示
void Print(unsigned char *str)
{
while(*str!='\0')