1）酸碱度（以H2SO4或NaOH计）或pH范围 Acidity and/or Alkalinity (MT 191) or pH range(MT 75.3)Maximum acidity: ...... g/kg calculated as H2SO4.Maximum alkalinity: ...... g/kg calculated as NaOH.pH range: ...... to ......2）湿筛试验（通过75μm试验筛） Wet sieve test (MT 185)Maximum: ......% of the formulation shall be retained on a ...... μm test sieve.3）悬浮率 Suspensibility (MT 184)A minimum of ......% of the ...... [ISO common name] content shall be in suspensionafter 30 min in CIPAC Standard Water D at 30 ± 2°C.4）倾倒性 Pourability (MT 148.1)Maximum "residue": ......%.5）持久起泡性 Persistent foam (MT 47.2) (Note 9)Maximum: ...... ml after 1 min.*Spontaneity of dispersion (MT 160)A minimum of ......% of the ...... [ISO common name] content shall be in suspensionafter 5 min in CIPAC Standard Water D at 30 ± 2°C*Particle size distribution (MT 187)…% of particles shall be in the range … to …*Viscosity (MT 192)The viscosity shall be in the range … to ….6）其他 Storage stabilityStability at 0°C (MT 39.3)After storage at 0 ± 2°C for 7 days, the formulation shall continue to comply withclauses for:- suspensibility,- wet sieve test,Stability at elevated temperature (MT 46.3)After storage at 54 ± 2°C for 14 days (Note 11), the determined average active ing redient content must not be lower than ......% relative to the determined average co ntent found before storage and the formulation shall continue to comply with the clauses for:- acidity/alkalinity/pH range ,- pourability ,- spontaneity of dispersion ,- suspensibility,- wet sieve test ,6.水剂(AS) aqueous solution1）水不溶物含量2）酸碱度(以H2SO4或NaOH计)或pH范围3）稀释稳定性4）其他7.可溶粉剂(SP) Water soluble powders1）水分含量Water (MT 30.5)Maximum: ...... g/kg.2）酸碱度(以H2SO4或NaOH计)或pH范围 Acidity and/or Alkalinity (MT 191) or pH range (MT 75.3)Maximum acidity: ...... g/kg calculated as H2SO4.Maximum alkalinity: ...... g/kg calculated as NaOH.pH range: ...... to ......3）溶解程度和溶液稳定性（通过75 μm试验筛） Degree of dissolution and solution stability (MT 179)Residue of formulation retained on a 75 μm test sieve after dissolution in CIPAC Standard Water D at 30 ± 2°C :Maximum: ......% after 5 min.Maximum: ......% after 18 hours.4）湿筛试验?5）润湿时间 Wettability (MT 53.3)The formulation shall be completely wetted in ...... min without swirling.6）持久起泡性 Persistent foam (MT 47.2)maximum: ...... ml after (i)In the case of water soluble bag packaging, the provisions of clause 6.21.6.4 shouldbe applied.7）其他 Stability at elevated temperature (MT 46.3)After storage 54 ± 2°C for 14 days, the determined average active ingredien t conte nt must not be lower than ......% relative to the determined average content found b efore storage and the formulation shall continue to comply with the clauses for:- acidity/alkalinity/pH range ,- wettability ,- degree of dissolution and solution stability ,8.可溶粒剂(SG) Water soluble granules1）水分含量 Water (MT 30.5)Maximum: ..…. g/kg.2）酸碱度(以H2SO4或NaOH计)或pH范围 Acidity and/or Alkalinity (MT 191) or pH range (MT 75.3)Maximum acidity: ...... g/kg calculated as H2SO4.Maximum alkalinity: ...... g/kg calculated as NaOH.pH range: ...... to ......3）持久起泡性 Persistent foam (MT 47.2)If required, maximum ...... ml after 1 min.In the case of water soluble bag packaging, the provisions of clause 6.23.6.4 shouldbe applied.4）溶解程度和溶液稳定性（通过75μm试验筛） 5）湿筛试验 Degree of dissolution and solution stability (MT 179)Residue of formulation retained on a .. μm test sieve after dissolution in CIPAC Standard Water D at 30 ± 2°C .Maximum: ...... % after 5 min.Maximum: ...... % after 18 hours.*Dustiness (MT 171)Essentially non-dusty*Attrition resistance (MT 178.2)Minimum: ......% attrition resistance.*Flowability (MT 172)At least ......% of the formulation shall pass through a 5 mm test sieve after 20 drops of the sieve.6）其他 Stability at elevated temperatures (MT 46.3)After st orage at 54 ± 2°C for 14 days the determined average active ingredient con tent shall not be lower than ......% relative to the determined average content foun d before storage and the formulation shall continue to comply with the clauses for:- acidity/alkalinity/pH range ,- degree of dissolution and solution stability ,- dustiness ,- attrition resistance ,9.可溶片剂(ST) Water soluble tablets (1）水分含量2）酸碱度(以H2SO4或NaOH计)或pH范围3）持久起泡性4）崩解时间5）溶解程度和溶液稳定性（通过75 μm试验筛）6）湿筛试验7）粉末和碎片8）其他10.油剂(OL) Oil miscible liquids1）水分含量2）酸碱度(以H2SO4或NaOH计)或pH范围3）其他11.超低容量液剂(UL) Ultra low volume liquids1）水分含量2）酸碱度(以H2SO4或NaOH计)或pH范围3）挥发性4）动力粘度5）其他12.烟片(FT) smoke tablet1）水分含量或干燥减量2）酸碱度(以H2SO4或NaOH计)或pH范围3）成烟率4）自燃温度5）燃烧发烟时间6）跌落破碎率7）粉末和碎片8）点燃试验9）其他13.烟剂(FU) smoke generator1）水分含量或干燥减量2）酸碱度(以H2SO4或NaOH计)或pH范围3）成烟率4）自燃温度5）点燃试验6）燃烧发烟时间7）其他14.烟粉粒剂(FU)1）水分含量或干燥减量2）酸碱度(以H2SO4或NaOH计)或pH范围3）成烟率4）干筛实验5）自燃温度6）点燃试验7）燃烧发烟时间8）其他15.水乳剂(EW) Emulsions, oil in water1）酸碱度(以H2SO4或NaOH计)或pH范围 Acidity and/or Alkalinity (MT 191) or pH range (MT 75.3)Maximum acidity: ...... g/kg calculated as H2SO4.Maximum alkalinity: ...... g/kg calculated as NaOH.pH range: ...... to ......2）乳液稳定性 Emulsion stability and re-emulsification (MT 36.1.1, MT 36.3 or MT 183) The formulation, when diluted at 30 ± 2°C with CIPAC Standard Waters A and D, shall comply with the following:参EC3）倾倒性 Pourability (MT 148.1)Maximum "residue": ...... %.4）持久起泡性 Persistent foam (MT 47.2)Maximum: ...... ml after 1 min.5）其他 Storage stabilityStability at 0°C (MT 39.3)After storage at 0 ± 2°C for 7 days, no separation of par ticulate or oily matter shall be visible after gentle agitation.Stability at elevated temperature (MT 46.3)After storage 54 ± 2°C for 14 days, the determined average active ingredient conte nt must not be lower than ......% relative to the determined average content found b efore storage and the formulation shall continue to comply with the clauses for:- acidity/alkalinity/pH range ,- emulsion stability and re-emulsification ,3）酸碱度（以H2SO4或NaOH计）或pH范围4）筛析（通过75μm筛）5）悬浮率6）分散稳定性7）倾倒性8）持久起泡性9）其他19.水分散粒剂(WG) Water dispersible granules1）水分含量 Water (MT 30.5)Maximum: ...... g/kg.2）酸碱度(以H2SO4或NaOH计)或pH范围 Acidity and/or Alkalinity (MT 191) or pH range (MT 75.3)Maximum acidity: ...... g/kg calculated as H2SO4.Maximum alkalinity: ...... g/kg calculated as NaOH.pH range: ...... to ......3）悬浮率 Suspensibility (MT 168, MT 184)A minimum of ......% shall be in suspension after 30 min in CIPAC Standard Water D at 30 ± 2°C .In the case of water soluble bag packaging, the requirements of clause 6.13.6.3 should be applied.4）湿筛试验（通过75μm试验筛）Wet sieve test (MT 185)Maximum: ......% retained on a 75 μm test sieve.5）分散性 Degree of dispersion (MT 174)Dispersibility: minimum ......% after 1 minute of stirring.6）湿润时间 Wettability (MT 53.3)The formulation shall be completely wetted in ...... min.7）持久起泡性 Persistent foam (MT 47.2)Maximum: ...... ml after 1 minute.8）粒度范围 Flowability (MT 172)At least ......% of the formulation shall pass through a 5 mm test sieve after 20 drops of the sieve.*Dustiness (MT 171)Essentially non-dusty.*Attrition resistance (MT 178.2)Minimum: ......% attrition resistance.9）其他Stability at elevated temperature (MT 46.3)After storage at 54 ± 2°C for 14 days, the determined average active ingredient co ntent must not be lower that ......% relative to the determined average content foun d before storage and the formulation shall continue to comply with the clauses for:- by-products of manufacture or storage ,- acidity/alkalinity/pH range ,- wet sieve test ,- degree of dispersion- suspensibility- dustiness- attrition resistance ,20.可分散片剂(WT) Water dispersible tablets1）水分含量2）酸碱度(以H2SO4或NaOH计)或pH范围3）崩解时间4）悬浮率5）湿筛试验6）持久起泡性7）粉末和碎片8）其他21.可溶液剂（SL） Soluble concentrates1）水分含量 Water (MT 30.5)Maximum: ...... g/kg.2）酸碱度(以H2SO4或NaOH计)或pH范围 Acidity and/or Alkalinity (MT 191) or pH range (MT 75.3)Maximum acidity: ...... g/kg calculated as H2SO4.Maximum alkalinity: ...... g/kg calculated as NaOH.pH range: ...... to ......3）与水互溶性 Solution stability (MT 41)The formulation, after the stability test at 54°C and following dilution (Note 6) w ith CIPAC standard water D and standing at 30 ± 2°C for 18 h, shall give a clear o r opalescent solution, free from more than a trace of sediment and visible solid par ticles. Any visible sediment or particles produced shall pass through a 45 μmtest sieve.4）其他 Storage stabilityStability at 0°C (MT 39.3)After storage at 0 ± 2°C for 7 days, the volume of solid and/or liquid which separates shall not be more than 0.3 ml.Stability at elevated temperature (MT 46.3)After storage at 54 ± 2°C for 14 days, the determined average active ingredient co ntent must not be lower than ......% relative to the determined average content foun d before storage and the formulation shall continue to comply with the clauses for:- acidity/alkalinity/pH range22.悬浮种衣剂(FS) Suspension concentrates for seed treatment1）酸碱度(以H2SO4或NaOH计)或pH范围2）筛析3）悬浮率（通过44μm试验筛）4）成膜时间5）包衣均匀度6）脱落率7）其他23.气雾剂(AE) aerosol1）水分含量（醇剂、水基气雾剂可不制定此项控制项目）2）酸碱度(以H2SO4或NaOH计)或pH范围（仅限于水基气雾剂）3）内压力（规定具体的温度）4）净含量5）雾化率6）其他24.蚊香(MC) mosquito coil1）水分2）盘平均质量3）双盘分离度4）燃烧时间5）抗折力（盘强度）6）其他25.电热蚊香片(MV) vaporizing mat1）片的大小2）挥发速率(4小时后测定残余量)3）其他26.电热蚊香液(LV) liquid vaporizer1）挥发速率2）最低持效期3）其他27.饵剂(RB) bait1）水分含量2）其他。