38 B18.22.1 - 1965 39 B18.24 - 2004 40 B 18.24.1 41 B18.3 - 2003
42 B 18.3 43 44 45 46 47 B18.3.1M - 1986 B 36.10 B36.10M - 2004 B36.19M - 2004 B46.1 - 2002
54 ISO 898/Ⅱ-1992
55 ISO 4775-1992
56 ISO/IEC 170252005 Rev.2 57 ISO 2178-1982
Mechanical properties of fasteners - Part 2: Nuts with specified proof load values Coarse thread Mechanical Properties of Fasteners, Part Ⅱ,Nuts with Specified Proof Loads Hexagon Nuts For High-Strength Bolting With Large Width Across Flats-Product Grade B Property Classes 8 And 10 Hexagon Nuts for High-Strength Structural Bolting with Large Width Across FlatsProduct Grade B-Property Classes 8 and 10 General requirements for the Competence of Testing and Calibration Laboratories Nonmagnetic Coatings on Magnetic Substrate--Measurement of coating Thickness--Magnetic Method SAE标准 Numbering Metals and Alloys Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure Premium Aircraft Quality Steel Cleanliness Magnetic Particle Inspection Procedure Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Aircraft Quality Steel Cleanliness Magnetic Particle Inspection Procedure
48 BPVC-IX - 2004
49 Fed-Std-123 Rev.G Fed.Std.No.123
50 Fed-Std-183 Rev.C Fed.Std.No.183
Continuous Identification Marking of Iron and Steel Products
51 Fed-Std-H28 52 A-A-59230-1998 53 FED-STD 313 Rev.D
19 B 16.10- 2000 (R2003)
20 B16.11 - 2005
21 B16.34 - 2004 22 B16.47 - 2006
23 B16.5 - 2003 24 B26 B18.15 - 1985 27 B18.15M - 1998
28 B18.2.1 - 1996
Handbook of Thread Dimensions Fluid, Magnetic Particle Inspection, Suspension Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities Material Safety Data Sheets Preparation and the Submission of ISO 标准
Square and Hex Bolts and Screws, Inch Series Square and Hex Bolts and Screws Square and Hex Nuts Metric Hex Cap Screws Metric Heavy Hex Bolts Metric Heavy Bolts Metric Hex Nuts, Style 1 Metric Hex Nuts, Style 2 Metric Slotted Hex Nuts Metric Hex Flange Nuts Metric Hex Jam Nuts Metric Heavy Hex Nuts Plain Washers Part Identifying Number (PIN) Code System Standard for B18 Fastener Products Part Identifying Number(PIN)Code System Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series) Socket Cap, Shoulder and Set Screw, Inch Series Hexagon Socket and Spline Socket Screws Socket Head Cap Screws (Metric Series) Welded and Seamless Wrought Steel Pipe Welded and Seamless Wrought Steel Pipe Stainless Steel Pipe Surface Texture, Surface Roughness, Waviness and Lay Surface Texture BPVC Section IX-Welding and Brazing Qualifications Welding Qualifications 联邦标准 Marking for Shipments (Civil Agencies)
14 B-5
15 B1.1 - 2003
16 B1.13M - 2005 17 B1.2 - 1983 18 B 1.3M - 1992
Metric Screw Threads: M Profile Gages And Gaging For Unified Inch Screw Threads Screw Thread Gaging Systems Dimensional Acceptability Inch Metric Screw Threads-UN UNR UNJ M MJ Face to Face and End to End Dimensions of Valves Face to Face and End to End Dimensions of ferrous Valves Forged Fittings, Socket-Welding and Threaded Forged steel Fittings, Socket Weld and Threaded Valves Flanged, Threaded and Welding End Large Diameter Steel Flanges: NPS 26 Through NPS 60 Metric/Inch Standard Large Diameter Steel Flanges Pipe Flanges and Flanged Fittings: NPS 1/2 through 24 Dimensional Standards for Steel Pipe Flanges and Flanged Fittings Steel Pipe Flanges and Flanged Fittings Factory-Made Wrought Butt welding Fittings Wrought Steel Butt welding Fittings Forged Eyebolts Forged Lifting Eyes Metric Lifting Eyes
11 MIL-STD-276-92 REV A
Impregnation of Porous Nonferrous Metal Castings
12 MIL-STD-1312-97 REV B 13 B-1
Fastener Test Methods Test 13 and Test 20 AIAG 标准 Bar Code Symbology standard for 3-of-9 Bar Codes Bar Code Symbology standard 02.00 Primary Metals Tag Identification Application Standard ASME/ANSI标准 Unified Inch Screw Threads (UN & UNR Thread Form)
29 B18.2.2 - 1987 30 B18.2.3.1M - 1999 31 B18.2.3.6M - 1979 32 33 34 35 36 37 B18.2.4.1M - 2002 B18.2.4.2M - 2005 B18.2.4.3M - 1979 B18.2.4.4M - 1982 B18.2.4.5M - 1979 B18.2.4.6M - 1979
标准名称汇总对照表
序号 标准代号 英文名称 AWS 标准 1 A5.1/A5.1M -2004 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding Mild steel covered Arc-Welding Electrodes Specification for Low-alloy Steel Electrodes for Shielded Metal Arc Welding Low-Alloy Steel Covered Arc-Welding Electrodes ANSI标准 3 H 35.1/H 35.1(M)2006 4 H 35.1(M) Alloy and Temper Designation System for Aluminum Alloy and Temper Designation System for Aluminum [Metric] MIL 标准 5 MIL-STD-123-67 REV A 6 MIL-STD-163-98 REV C Color Identification Marking of Covered Arc-welding Electrodes Steel Mill Products Preparation for Shipment and Storage