3.The design and printing are clear, and wrong printing and missing printing are not allowed
Identification
material object
1.Stickers of self-adhesive bar code and warning words are correct in content and position
4.The product protection is reasonable and proper, the inner and outer packaging are well matched, and there is no forced extrusion deformation
5.All kinds of packing are in good condition without looseness and cracking, and the sealing tape fits well with the packing box
Packing
mode
1.The packaging method is correct
2.Do not misplace or omit; do not mix foreign matters (hair, insects, etc.)
3.Products are placed in the right order or direction
Inspector
Approved by
5
Performance testing
Height 120cm, free fall test three times, no card opening
Comprehensive judgment
Qualified □ rejected □ specially purchased □ repaired □ selected □ other:
2
Size
testing
Dimensional specification
Measuring tools
Measured condition
determine
3
Colour
Control sample: 3.0△+
4
Packaging and identification
Packing
Material Science
MIL-STD-105E □ normal □ tigE
AC
RE
NO.
Inspection items
Number of samples
Project requirements
Inspection record
determine
1
Visual inspection
Delivery inspection record
Customer
Order number
Name
Batch
Inspection date
Inspector
Visual inspection criteria
Minor defect (min) = 2.5
Main disadvantage (CRI) = 1.5
Main disadvantages
Structural unconformity, fracture, serious deformation, etc;
Minor shortcomings
Heterochromatic spot, burr, multi glue and lack of glue, rupture and scratch, dirt, pore, channeling, scorch, peeling, material flower, thread pattern, whitening, scratching and indentation
1.It is not allowed to mix wrong or different specifications. The outer packing materials shall not have obvious color difference
2.No obvious dirt and damage
2.The case number is correct without repetition and the writing position is correct
3.The external signs must be consistent with the internal physical objects