一款翻盖手机实例：主板厚: 10.7mm手机高度：100.25mm机身厚度：14mmT卡胶塞，TPU字符凹刻电铸模，表面CD纹，镀枪色机身正面宽度：51.3mmA+ ABS+PC 真空镀+UVA壳ABS+PC 真空镀+UV 字符镭雕字符丝印，电镀效果（屏幕，镜片）B壳ABS +PC 真镀+UV字符镭雕C+,ABS 真镀+UVC壳ABS+PC 真镀+UVPC按键，字符丝印UV固化，电镀效果（喷漆完之后，一般进行UV紫外光固化效果）UBS胶塞，TPU, 字符凹刻D壳ABS+PC 真空镀+UV摄像头，镜片电镀效果字符镭雕A flip phone examples: CPU tickness: 10.7mmMobile Height: 100.25mmBody thickness: 14mmT Card Stopper :TPU or Rubber material characters intaglioElectric molds, the surface of CD pattern, plated gun colorBody front width: 51.3mmA + ABS + PC PVDvacuum plating(PVD: Physical vapor deposition) + UV curing A shell : ABS + PC PVDvacuum plating + UV Laser carving characters Character (Method: Silk-screen printing), electroplating effects (screen, lens)B-shell: ABS + PC rPVD vacuum plating + UV curingLaser carving characters in C +, ABS (method:PVD vacuum plating + UV curing) C-shell : ABS + PC(method: PVD vacuum plating+ UV curing)PC keypad, character Silk-screen printingUV curing, plating effect (after completing painting, UV-curing technique effects) UBS Rubber Stopper, TPU, character intaglioD-shell : ABS + PC (method: PVDvacuum plating + UV curing)Camera lensesPlating effectLaser carve characters(注：电镀只可以做ABS和金属材质，真空镀可以做PMMA和其他任何材质) 工艺说明：A壳：塑胶材质不导电真空镀B壳：钢板表面拉丝电镀C壳: 塑胶材质注塑喷涂D壳：塑胶材质模具蚀纹电池盖不锈钢拉丝电镀导航键铝片二次氧化/装饰件铝片拉丝氧化OK键塑胶材质表面电镀功能键1 PC注塑表面喷油功能键2 塑胶材质表面电镀电镀/电泳（装饰效果比较亮）数字键PC注塑表面喷油/装饰件电镀屏幕镜片透明材质底面镀膜摄像头镜片透明材质底面丝印螺丝塞TUP侧按键电镀telecommunication(Note: electroplating can be done by only ABS and metal materials, vacuum plating can be done on and any other material such as PMMA亚克力)Process Description:A Shell: plastic material, not conductive PVD vacuum platingShell B: brushed steel surface and eletroplating effectC shell: plastic injection, sprayD-shell: plastic material, in-mold metal etching techniqueBattery cover: brushed stainless steel surface, electroplatingNavigation key: Brushed aluminum oxidizedOK button: plastic, surface eletroplating effectFunction keys 1: PC Injection molding surfaceFunction keys 2 plastic, surface electroplatingPlating / electrophoresis (decorative effect brighter)Injection molding surface with paint spraying / decorative pieces of electroplatingThe screen lens, camerca lens: underside silk-screen printScrew stopper: TPU materialSide buttons with eletroplating effect, telecommunication.工艺说明：A壳：塑胶材质双色注塑文字丝印B壳：塑胶材质溅镀效果电池盖：塑胶材质模具纹理表面喷油局部丝印数字键塑胶材质表面喷油文字镭雕OK键塑胶材质电镀效果功能键和导航键塑胶材质电镀B壳装饰件：模具纹理表面喷油局部丝印镜片：片材底面镀（中枪色，是一种像手枪颜色的颜色）摄像头镜片：PMMA（亚克力材质）底面丝印喇叭网布织网侧按键塑胶材质溅镀效果（和电镀效果差不多，但是有颜色，色彩能亮）不导电真空溅镀工艺与手机外壳表面处理Non Conductive Vacuum Metallization Technics and Surface Treatment of Mobile Phone CrustProcess Description:A Crust: plastic material, two-color injection molding, text by silk-screen printingShell B: plastic material, PVD non conductive vacuum metallization surface treament(和电镀效果一样都是在塑料表面镀金属色，但是有镜面效果非常亮)Battery Cover: plastic material, paint-spraying, silk-screen printingThe number keys: surface with paint spraying, text with laser carving techniqueOK button: plastic material, electroplating techniqueFunction keys and navigation keys plastic with platingB shell decorative pieces: Local screen-printing, surface with paint spraying, in-mold texture/etchingLens: pistol color color)Camera Lens: PMMA (acrylic material) Bottom silk screenSpeaker Mesh NettingSide buttons: PVD vacuum metallization effect (similar to electroplating effects, but there is colors, color can be brighter).工艺说明：A壳：塑胶材质不导电真空镀A壳装饰件透明材质表面纹理底面镀膜B壳：钢板花纹镭雕表面电镀C壳：塑胶材质注塑黑色表面D壳：塑胶材质纹理凹刻注塑亮雾面（凹槽宽度0.2mm, 深度0.15mm）电池盖塑胶材质表面喷油纹理凹刻电池盖装饰件透明材质纹理凹刻底面丝印导航键塑胶材质表面喷油OK键塑胶材质表面电镀功能键1 PC薄片部分纹理突起功能键2 塑胶材质表面电镀数字键PC薄片侧键塑胶材质表面电镀屏幕镜片透明材质底面镀膜摄像头镜片透明材质底面丝印Process Description:A crust: plastic material with non conductive PVDvacuum platingA shell decorative pieces: transparent material, surface with texture, underside with coating Shell B: steel sheet with laser engraving treatment, surface eletroplatingC shell: plastic material, injection molding with black surfaceD-shell: plastic material, texture intaglio bright matte finish surface.(雾面或叫粗磨光效果有几种解释，是一种材料表面亮度处理，matte finish or dull polish finish)(Groove width of 0.2mm, the depth of 0.15mm)Battery Cover: plastic material, paint-spraying surface, texture intaglioThe battery cover decorative pieces:texture intaglio, transparent material, underside with silk-screen printing.Navigation keys: plastic material with paint-sprayingOK button: plastic material, surface with eletroplating techniqueFunction keys 1 PC thin part of the texture bumpFunction keys 2 plastic surface with eleroplating techniqueThe number keys PC thin sheetSide button: Plastic MaterialSurface platingScreen Lens: Transparent MaterialBottom Coating with thin filmUnderside of the camera lens by transparent materials, underside by silk-screen printing technique.工艺说明A壳：塑胶材质电镀效果A壳装饰件：不锈钢冲压彩镀B壳：塑胶材质电镀效果电池盖：铝合金纹理腐蚀表面氧化字符批花镜片：PMMA（亚克力）镀膜效果听筒装饰件：PMMA镀膜效果功能键：透明PC镀膜效果字符底面丝印导航键：透明PC 镀膜效果字符底面丝印OK键：透明PC 镀膜效果OK键装饰件：塑胶材质电镀效果功能键：塑胶材质电镀效果数字键：塑胶材质电镀效果亮雾面摄像头装饰件：塑胶材质电镀效果Process DescriptionA Shell: plastic material with eletroplating effectsA crust decorative pieces: stainless steel precision metal stamping part, color plating.Shell B: plastic material, eletroplating effect.The battery cover: aluminum alloy, eletrochemistry corrosion of superficial texture, surface oxidation treatment, (这里的表面氧化处理是叫阳极氧化处理，anodic oxidation，用在铝合金上，可以做成沙面satin finish,亮面glossy finish,苹果那一款全铝合金压制成的笔记本电脑外壳表面用的就是阳极氧化处理工艺), radiation thread pattern(批花纹理面)Lens: PMMA coating effectHandset & Accessories: PMMA coating effectFunction keys: Transparent PC coating effect, text underside silk-screen printNavigation keys: Transparent PC Screen, coating effect, text underside silk-screen printOK key: Transparent PC coating effectOK decorative part: electroplating effectFunction keys: effects of plastic platingThe numeric keys: plastic material, electroplating, matte finishCamera & Accessories: plastic material, chrome plated effects工艺说明：A壳：塑胶材质表面喷油-----3RMB（人民币）B壳：塑胶材质电镀效果-----7RMB电池盖：塑胶材质电镀效果------7RMBAB壳装饰件-电镀件------1RMB按键，导航键，功能键1，电铸件------7RMBOK键，电铸，电镀（注：电铸可做亮面，和雾面两种, 电镀做亮面）摄像头镜片: PMMA底面丝印--------0.8RMB镜片：片材文字底面镭雕-------2RMB总价-------27.8RMBProcess Description:A cap: plastic material, surface paint spray ----- 3RMB (RMB)B-shell: plastic material chrome plated results ----- 7RMBBattery Cover: plastic with chrome plated effect ------ 7RMBAB-shell decorations – Electroplated part------ 1RMBKeys, navigation keys, function keys 1, electrical castings ------ 7RMBOK key, electrical castings, electroplating (Note: do electroforming provides mirror finish, dull polish finish, electroplating provides glossy finish)Camera lens: PMMA bottom(silk-screen printing) -------- 0.8RMBLens: sheet material underside with laser carving ------- 2RMBTotal ------- 27.8RMB工艺说明：A壳：PC注塑模具纹理（免喷涂）B壳：塑胶材质（真空镀）A壳装饰件：铝片拉丝切亮边氧化（注：氧化是一种工艺，切亮边就是雾面周围一圈是亮边）B壳装饰件：PC注塑模具纹理（免喷涂）导航键：塑胶材质电镀效果OK键：水晶按键侧按键：塑胶材质表面喷油数字键：水晶按键镜片：片材文字底面丝印摄像头镜片：PMMA底面丝印Introduction of Decoration for mobile PhoneAcer Communication & Multimedia换面设计方案工艺说明：A壳：锌合金（注：可以打孔，铝合金不可以打孔，一般做电池盖用）局部表面珐琅工艺（中国古代的一种传统工艺）工艺说明：A壳：锌合金电池盖：锌合金表面珐琅工艺东森滑盖手机设计方案CSIZE: 99X44X12.6MMA壳IML--------------------8RMB（人民币）屏幕镜片透明材质底面丝印---------------2RMBB壳塑胶溅镀---------------------5.5RMBB壳装饰件塑胶材质喷油丝印----------2RMB超薄PC按键-----------------------7RMB摄像头装饰件铝合金拉丝------------------2RMB摄像头镜片------------------0.6RMBC壳塑胶材质表面喷油---------------------2.5RMBD壳塑胶材质拉丝喷油---------------------2RMB电池盖IML-------------------8RMB总价：39.6RMBU307滑盖手机设计方案SIZE：101X50X13.6MMA壳塑胶材质双色注塑---------------------10RMBB壳塑胶材质表面喷油---------------------3RMBC壳塑胶材质电镀效果---------------------6RMBD壳塑胶材质表面喷油---------------------3RMB镜片透明材质底面丝印---------------------2RMB电池盖IML--------------------------------------8RMBC壳装饰键塑胶材质表面喷油------------3RMB按键超薄PC------------------------------------7RMBUSB塞P+R表面喷油-------------------------1.5RMB摄像头镜片透明材质底面丝印------------0.6RMB摄像头装饰键塑胶材质表面喷油---------3RMB总价------------------------------------------------47RMB东森滑盖手机设计方案BSIZE：99X44X13.1MMA壳塑胶材质表面电镀---------------------7元（材料+工艺一共7块钱）镜片PET底面丝印----------------------------2元按键PC薄片字符镭雕透光----------------9元摄像头镜片亚克力底面丝印---------------1元C壳锌合金---------------------------------------8元D壳塑胶材料表面喷油-----------------------2.5元电池盖塑胶材料表面喷油-------------------3.5元总价-------------------------------------------------33元U307滑盖手机设计方案SIZE: 100.9X48X12.6MMA壳塑胶喷油--------------------------------3RMBA壳装饰件铝合金氧化拉丝--------------6RMBB壳锌合金模具纹理电镀----------------8RMBC壳锌合金电镀------------------------------8RMBD壳塑胶喷油---------------------------------3RMB电池盖塑胶纹理凹刻亮雾面-------------2RMB注：电池盖纹理宽0.2MM 深0.15MM按键超薄PC 局部突起底面丝印---------7RMB摄像头镜片透明材质底面丝印------------1RMB手写笔POM-------------------------------------0.5RMB塞子TPU-----------------------------------------1RMB总价-------------------------------------------------39.5RMBU307 滑盖手机设计方案SIZE: 100.2X45.5X12.8MMA壳锌合金电镀效果-------------------------8RMBB壳塑胶材质电镀效果----------------------3.5RMBC壳塑胶材质表面喷涂----------------------2RMBD壳塑胶材质表面喷涂----------------------2RMB电池盖铝合金表面氧化----------------------6RMB屏幕TP---------------------------------------------18RMB按键超薄PC--------------------------------------7RMB摄像头装饰件--------------------------------------0.5RMB摄像头镜片-----------------------------------------0.5RMB手写笔-----------------------------------------------0.5RMB总价--------------------------------------------------48RMB东森滑盖手机设计方案ASIZE: 99X44X12.6MMA壳塑胶喷油------------------------------------3元摄像头装饰件塑胶喷油------------------------2元屏幕镜片透明材质底面镀膜------------------2元摄像头镜片（2）透明材质底面丝印--------2元（注：把Logo印在透明材质底部）前壳装饰件（2）铝合金氧化拉丝-----------5元C壳塑胶溅镀------------------------------------6元D壳塑胶喷油------------------------------------3元电池盖铝合金喷砂------------------------------4元（注：喷砂是在金属表面涂雾砂面）按键超薄PC 局部突起底面丝印-----------7元塞子（2）TPU-------------------------------------1元总价--------------------------------------------------35元DONXON滑盖机设计方案ASIZE: 100.2X45.8X12.8(mm)工艺说明：A壳锌合金局部亮面大面蚀纹-------------8RMBB壳塑胶材质（表面喷油）-------------------4RMBC壳塑胶材质（表面喷油）-------------------4RMBD壳塑胶材质（表面喷油）-------------------4RMB电池盖塑胶材质（表面喷油）----------------4RMBTP-----------------------------------------------------18RMB按键导航键塑胶材质电镀效果数字键和功能键塑胶材质表面喷油导航键装饰件塑胶材质cd纹OK键电铸电镀cd纹--------------------------------------------------------7RMB摄像头装饰件塑胶材质电镀效果-----------0.5RMB摄像头镜片PMMA底面丝印------------------0.5RMB手写笔Pom-----------------------------------------0.5RMB总价--------------------------------------------------50.5RMB以上报价仅供参考U307滑盖手机设计方案SIZE: 100.5X48X12.6MMA壳塑胶模具纹理喷油----------------------3RMBB壳锌合金电镀---------------------------------8RMBC壳锌合金电镀---------------------------------8RMBD壳塑胶模具纹理------------------------------2RMB电池盖铝合金亮面氧化镭雕纹理---------6RMB（注：电池盖纹理宽0.2MM深0.15MM）按键超薄PC局部突起底面丝印-------------7RMB摄像头镜片透明材质底面丝印---------------1RMB手写笔Pom------------------------------------------0.5RMB塞子TPU--------------------------------------------1RMB总价---------------------------------------------------36.5RMBRocada翻盖手机设计方案SIZE: 99.2X48.8X14.1MMA壳塑胶材质表面喷油A壳装饰件1 不锈钢表面镀膜A壳装饰件2 透明材质表面镀膜字符镭雕B壳塑胶注塑表面喷油C壳锌合金表面镀膜镭雕拉丝D壳塑胶材质表面喷油电池盖铝合金喷砂阳极氧化确认键塑胶材质电铸电镀导航键透明材质底面纹路底面丝印功能键透明材质表面钻石纹底面丝印数字键透明材质表面拉丝底面丝印侧键塑胶材质表面喷油屏幕镜片透明材质底面镀膜丝印摄像头镜片透明材质底面丝印摄像头装饰件1 透明材质底面钻石纹底面镀膜字符丝印摄像头装饰件2 塑胶材质电铸电镀CD纹工艺说明：A壳塑胶材质非金属溅镀效果B壳塑胶材质表面喷油C壳塑胶材质模具纹理D壳锌合金电池盖塑胶材质模具纹理A壳装饰件铝合金拉丝效果镜片片材底面镀膜（锖色/枪色）功能键塑胶材质表面喷油文字镭雕OK键塑胶材质表面喷油数字按键超薄PC摄像头镜片PMMA（亚克力）数字按键装饰件：塑胶材质电镀效果TeleFree 滑盖手机设计方案SIZE: 100X48.9X14.6MMA壳塑胶材质溅镀非金属油B壳锌合金电镀效果C壳锌合金电镀效果D壳塑胶材质溅镀非金属油雾面效果屏幕镜片透明材质底面丝印导航键透明材质IMLOK键透明材质电镀效果功能键Pc薄片底面丝印数字键薄片按键纹理丝印字符镭雕摄像头镜片透明材质底面丝印音量键塑胶材质表面喷油电池盖塑胶材质纹理亮雾面TeleFree 滑盖手机设计方案SIZE: 104X50X15MMA壳锌合金/不锈钢/拉丝/电镀哑光屏幕镜片透明材质底面镀膜丝印确认键塑胶材质背面镀膜导航键塑胶材质电铸电镀导航键装饰件塑胶材质背面镀膜接听挂断键铝片氧化拉丝LOGO电镀功能键塑胶拉丝背面镀膜数字键超薄PC正面拉丝背面镀膜B壳锌合金电镀C壳锌合金电镀局部拉丝D壳塑胶材质表面喷涂电池盖塑胶材质模具蚀纹（注：模具花纹，如电池盖上的花纹）摄像头镜片透明材质底面丝印摄像头装饰件真空镀侧键塑胶材质表面喷油防磨条PomTeleFree滑盖手机设计方案SIZE: 104X50X15MMA壳锌合金/不锈钢/拉丝/电镀哑光屏幕镜片透明材质底面镀膜丝印确认键塑胶材质背面镀膜导航键塑胶材质电铸电镀导航键装饰件塑胶材质背面镀膜接听挂断键铝片氧化拉丝LOGO电镀功能键塑胶拉丝背面镀膜数字键超薄PC 正面拉丝背面镀膜B壳锌合金电镀C壳锌合金电镀局部拉丝D壳塑胶材质表面喷涂电池盖塑胶材质模具蚀纹摄像头镜片透明材质底面丝印摄像头装饰件真空镀侧键塑胶材质表面喷油防磨条Pom百灵通M6游戏手机设计方案-G工艺说明：前壳：塑胶材质表面喷油后壳：塑胶材质表面喷油功能键1：塑胶材质电镀效果SIZE: 107.8X12.5X54.0MM前壳装饰件：塑胶材质表面喷油大面雾面电池盖：塑胶材质表面喷油后壳装饰件：透明材质底面镀膜五向键：塑胶材质表面喷油OK键塑胶材质表面喷油CD纹功能键2：透明材质表面喷油。