质量检查员：
Shift (team) leader
班（组）长：
年(YY)月(MM)日(DD)
Oil buffer travel distance
ent of three phase regulation lever
三相拐臂角度调整
Results结论
Notes
备注
Responsible technician
技术负责人：
Quality inspector
检查结果
Intact appearance of circuit breakers and actuators, complete accessories and product technical documents断路器、操动机构外观完好，附件、产品技术文件齐全
Circuit breakers and actuators are tightly installed in accordance with relevant specifications.
Standby travel after switch on
合闸后的备用行程（mm）
Phase to phase maximum simultaneous incoming difference
相间同时最大接入差（mm）
Spring buffer travel distance
弹簧缓冲器行程（mm）
断路器、操动机构安装符合规范要求，安装牢固
Electrical connections are correct, reliable, and desirably contacted. Cable duct openings are sealed.
电气接线正确、可靠、接触良好，电缆管口密封
Flexible and reliable operations. Correct on/off indication. Rotating parts applied with applicable lubrication grease.操作灵活、可靠，分、合闸指示正确，转动部分涂以适宜的润滑脂
Insulation parts are intact with clean surface and full painting. Phases are marked correctly in color. Well grounded.绝缘件完整无损，表面清洁，油漆完整，相色标志正确，接地良好
安装调整
Model
断路器型号
Voltage level
电压等级
kV
Manufacturer
制造厂
Model of actuator
操动机构型号
Manu. date
出厂日期
Manu. number
出厂编号
安装检查
Installation Inspection
Items to be inspected
检查内容
Inspection results
Installation adjustment
Item
项目
Phase A相
Phase B相
Phase C相
Full travel distance of conductive rod
导电杆全行程（mm）
Depth of moving contact into fixed contact
动触头插入固定触头深度（mm）
SH 3503–J537
Installation and Adjustment Record of Circuit Breakers
断路器安装调整记录
Project Name:工程名称：
Unit Name:单元名称：
Pos (Panel) No.
位（盘）号
Description
名称
铭牌
Nameplate