From consignor (g)
Sample receipt 样品编号
Sample Number 生产日期
Testing Date
Date Code
检测项目 Testing Item
<镉>Cd,<铅>Pb,<铬>Cr,<汞>Hg,<钡>Ba,<锑>Sb,<砷>As,<硒>Se
测试环境 Testing Condition
主检(Tested by) 审核(Verified by)
签名 Underwrite
核准(Approved by)
日期(Date) 表单编号(SHEET NO):WG018-04(1/3)
Testing Report
产品名称 Product Name
生产单位 MFR
委托单位
连接器 其它
Connector
电子天平(Electrical scale)
CP225D

ICP-OES
OPTIMA 2000DV
编号(Assign No) 15406340
080N3081402
1.仪器检测极限(Equipment sensing limits): Cd:0.5ppb Pb:6ppb Cr:3ppb Hg:5ppb
温度<Temperature>: ℃ 湿度<Relative Humidity>: %RH
检测依据
Pb(铅),Cd(镉),汞(Hg),铬(Cr),钡(Ba),锑(Sb),砷(As),硒(Se)含量参照方法
Testing Standard
IEC 62321 (样品完全熔解法)
检测方式 Testing Method
感应耦合电浆放射光谱法(ICP-OES)
检 测 结 果 (Testing Result)
序号 NO.
检测项目 (Testing substance)
技术含量要求 (Content Limits by
weight ( ppm )
实测结果 Testing Result by
weight ( ppm )
判定 Determine
说 明 关于量测结果不确定度的说明 Explain
(Directions of measurement uncertainty in the calibration)
1.本次测量结果不确定度的置信水平为 95%
(The measurement uncertainties are for a confidence probability of not less than 95%)
报告编号
Report No
总页数
Page
品保实验室
QA Laboratory
有害物质含量测试报告
Hazardous Substances Test Report
品 号(PRODUCT PART NO): 规格型号(Model Number): 检测试原因(Testing Purpose): IQC FQC New Product 委托单位(Consignor):
1
<镉>Cd
2
<铅>Pb
3
<铬>Cr
4
<汞>Hg
5
<钡>Ba
6
<锑>Sb
7
<砷>As
8
<硒>Se
表单编号(SHEET NO):WG018-04(2/3)
Testing Report
序号 NO. 1 2
仪器设备(Testing Equipment)
设备名称(Equipment)
型号(Model No)
Others
本厂 其它
Suyin DongGuan Others
料号 Part Number
规格型号 Model Number
检测类别
委托检测
Consignor 样品来源方式
委托单位送样
Inspectioncategory 收样日期
Consign Test
Sample Source 检测样品数量 Sample Qty 检测时间
2.本次测量结果不确定度为 U= ppm k=
(The measurement uncertainties of the calibration)
表单编号(SHEET NO):WG018-04(3/3)
Ba:0.9ppb Sb:6ppb As:9ppb Se:9ppb 2.检测中若元素含量小于仪器检测极限,报告结果显示为“0”
(In testing, if substance content less than equipment sensing limits, so report result show”0”) 3.检测规格为实盈测试规范(The test spec is according Suyin’s spec)