昆明理工大学信息工程与自动化学院学生实验报告（2012 —2013 学年第二学期）课程名称：计算机网络技术开课实验室：自动化系 2013 年 5 月16日年级、专业、班学号姓名成绩实验项目名称实验三路由配置指导教师教师评语教师签名：年月日一、实验目的：●掌握路由的基本配置方法；●掌握在CCNA下对路由进行配置的基本步骤；●熟悉和掌握在CCNA下对路由进行配置的常用命令；二、实验报告内容：二、实验报告内容：RouterARouterA Con0 is now availablePress RETURN to get started.RouterC>enableRouterA>enableRouterA#show startup-configUsing 781 out of 32762 bytes!version 12.0service timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname RouterA!!!!interface Ethernet0ip address 11.11.11.1 255.255.255.0!interface Serial0ip address 40.40.40.2 255.255.255.0!!interface Serial1no ip address!shutdown!interface TokenRing0no ip address!shutdownno ip classlessip route 20.20.20.0 255.255.255.0 40.40.40.1!!line con 0line aux 0line vty 0 4endRouterA#show interfaceSerial0 is up, line protocol is upHardware is HD64570Internet address is 40.40.40.2/24MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive set (10 sec)Last input 00:00:09, output 00:00:12, output hang neverLast clearing of "show interface" counters neverInput queue: 0/75/0 (size/max/drops); Total output drops: 0Queueing strategy: weighted fairOutput queue: 0/1000/64/0 (size/max total/threshold/drops)Conversations 0/1/256 (active/max active/max total)Reserved Conversations 0/0 (allocated/max allocated)5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec1721 packets input, 106287 bytes, 0 no bufferReceived 1301 broadcasts, 0 runts, 0 giants, 0 throttles0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort2195 packets output, 100497 bytes, 0 underruns0 output errors, 0 collisions, 221 interface resets0 output buffer failures, 0 output buffers swapped out280 carrier transitionsDCD=up DSR=up DTR=up RTS=up CTS=upEthernet0 is up, line protocol is upHardware is Lance, address is 0000.0c8d.5c9d (bia 0000.0c8d.5c9d) Internet address is 11.11.11.1/24MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255 Encapsulation ARPA, loopback not set, keepalive set (10 sec)ARP type: ARPA, ARP Timeout 04:00:00Last input never, output 00:00:07, output hang neverLast clearing of "show interface" counters neverQueueing strategy: fifoOutput queue 0/40, 0 drops; input queue 0/75, 0 drops5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec0 packets input, 0 bytes, 0 no bufferReceived 0 broadcasts, 0 runts, 0 giants, 0 throttles0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort0 input packets with dribble condition detected472 packets output, 47379 bytes, 0 underruns0 output errors, 0 collisions, 2 interface resets0 babbles, 0 late collision, 0 deferred0 lost carrier, 0 no carrier0 output buffer failures, 0 output buffers swapped outTokenRing0 is down, line protocol is downHardware is TMS380, address is 0007.7842.3575 (bia 0007.7842.3575)MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, rely 255/255, load 1/255 Encapsulation SNAP, loopback not set, keepalive set (10 sec)ARP type: SNAP, ARP Timeout 04:00:00Ring speed: 16 MbpsSingle ring node, Source Route Transparent Bridge capableGroup Address: 0x00000000, Functional Address: 0x08800000Ethernet Transit OUI: 0x000000Last input 00:00:02, output 00:00:05, output hang neverLast clearing of "show interface" counters neverQueueing strategy: fifoOutput queue 0/40, 0 drops; input queue 0/75, 0 drops5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec576 packets input, 30393 bytes, 0 no bufferReceived 453 broadcasts, 0 runts, 0 giants0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort318 packets output, 36935 bytes, 0 underruns0 output errors, 0 collisions, 1 interface resets0 output buffer failures, 0 output buffers swapped out4 transitionsRouterA#config tEnter configuration commands, one per line. End with CNTL/Z.RouterA(config)#interface s0RouterA(config-if)#ip address 40.40.40.2 255.255.255.0RouterA(config-if)#no shutRouterA(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouterA#copy running-config startup-configBuilding configuration...[OK]RouterA#show interface s0Serial0 is up, line protocol is upHardware is HD64570Internet address is 40.40.40.2/24MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive set (10 sec)Last input 00:00:09, output 00:00:12, output hang neverLast clearing of "show interface" counters neverInput queue: 0/75/0 (size/max/drops); Total output drops: 0Queueing strategy: weighted fairOutput queue: 0/1000/64/0 (size/max total/threshold/drops)Conversations 0/1/256 (active/max active/max total)Reserved Conversations 0/0 (allocated/max allocated)5 minute input rate 0 bits/sec, 0 packets/sec5 minute output rate 0 bits/sec, 0 packets/sec1721 packets input, 106287 bytes, 0 no bufferReceived 1301 broadcasts, 0 runts, 0 giants, 0 throttles0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort2195 packets output, 100497 bytes, 0 underruns0 output errors, 0 collisions, 221 interface resets0 output buffer failures, 0 output buffers swapped out280 carrier transitionsDCD=up DSR=up DTR=up RTS=up CTS=upRouterA#config tEnter configuration commands, one per line. End with CNTL/Z.RouterA(config)#ip route 20.20.20.0 255.255.255.0 40.40.40.1RouterA(config)#exit%SYS-5-CONFIG_I: Configured from console by consoleRouterA#show running-configBuilding configuration...Current configuration:!version 12.0service timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname RouterA!!!!interface Ethernet0ip address 11.11.11.1 255.255.255.0!interface Serial0ip address 40.40.40.2 255.255.255.0!!interface Serial1no ip address!shutdown!interface TokenRing0no ip address!shutdownno ip classlessip route 20.20.20.0 255.255.255.0 40.40.40.1!!line con 0line aux 0line vty 0 4endRouterA#copy running-config startup-configBuilding configuration...[OK]RouterA#ping 20.20.20.2Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 20.20.20.2, timeout is 2 seconds: .....Success rate is 0 percent (0/5)RouterA#ping 40.40.40.2Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 40.40.40.2, timeout is 2 seconds: .....Success rate is 0 percent (0/5)RouterA#config tEnter configuration commands, one per line. End with CNTL/Z.RouterA(config)#interface s0RouterA(config-if)#ip address 40.40.40.1 255.255.255.0RouterA(config-if)#no shutRouterA(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouterA#copy running-config startup-configBuilding configuration...[OK]RouterA#ping 40.40.40.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 40.40.40.1, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms RouterA#RouterCRouterB Con0 is now availablePress RETURN to get started.Router>RouterB>enbleTranslating 'enble' ...domain server (255.255.255.255)% Unknown command or computer name, or unable to find computer address RouterB>enableRouterB#config tEnter configuration commands, one per line. End with CNTL/Z.RouterB(config)#interface s0RouterB(config-if)#ip address 40.40.40.3 255.255.255.0RouterB(config-if)#no shutRouterB(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouterB#copy running-config startup-configBuilding configuration...[OK]RouterB#。