cmd_rdy<= 0;
cmd_data[15:8] <= RxD_data;
end
2'd3:
begin
data_cnt<= 2'd0;
data_rec_busy<= 0;
cmd_rdy<= 1; //命令接收完毕
cmd_data[7:0]<=RxD_data;
end
default:
begin
data_cnt<= 2'd0;
data_rec_busy<= 0;
cmd_rdy<= 0;
end
endcase
else
cmd_rdy<= 0;
end
//*********分辨命令*********//
always@(posedge clk_seri)
begin
if(rst)
begin
cmd_done<= 0;
modu_sel<= 0;
begin
data_cnt<= 0;
data_rec_busy<= 1;
cmd_rdy<= 0;
end
else if(RxD_data_ready && data_rec_busy)
case(data_cnt)
2'd0:
begin
data_cnt<= 2'd1;
data_rec_busy<= 1;
cmd_rdy<= 0;
.RxD(RxD),
.RxD_data_ready(RxD_data_ready),
.RxD_data_error(),.Biblioteka xD_data(RxD_data)
);
//*********上位机发命令给FPGA************//
always@(posedge clk_seri)
begin
if(rst)
data_rec_valid<= 0;
end
endcase
else
data_rec_valid<= 0;
end
always@(posedge clk_seri)
begin
if(rst)
begin
data_cnt<= 2'd0;
data_rec_busy<=0;
cmd_rdy<= 0;
end
else if(data_rec_valid)
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 19:50:45 04/19/2015
cmd_data[31:24]<= RxD_data;
end
2'd1:
begin
data_cnt<= 2'd2;
data_rec_busy<= 1;
cmd_rdy<= 0;
cmd_data[23:16]<= RxD_data;
end
2'd2:
begin
data_cnt<= 2'd3;
data_rec_busy<= 1;
output reg[31:0] dina,//ROM存储器，用于存储外部PN码
output reg wea,
output reg[1:0] addra
);
regcmd_rdy;//指令接收完成
reg[3:0]instr_code;//用于分辨命令，是asf还是ftw还是外部PN码
reg[31:0]cmd_data; //接收从上层发过来的命令
begin
instr_cnt<= 0;
data_rec_valid <= 0;
end
else if(RxD_data_ready && !data_rec_busy)
case(instr_cnt)
2'd0:
if(RxD_data == 8'h55)
begin
instr_cnt<= 2'd1;
data_rec_valid <= 0;
// Design Name:
// Module Name: Serial_Decoder
// Project Name:
// Target Devices:
// Tool versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
end
4'h8:
begin
ser_asf<=cmd_data[13:0];
cmd_done<= 0;
end
4'hF:
cmd_done<= 1; //上位机命令发送结束
default:;
endcase
end
else
begin
ser_ftw <= ser_ftw;
ser_asf <= ser_asf;
modu_sel<= modu_sel;
wireRxD_data_ready;
wire[7:0]RxD_data;
reg[1:0]instr_cnt;
regdata_rec_valid;
regdata_rec_busy;
reg[1:0]data_cnt;
//instance
receiver i_receiver(
.clk(clk_seri),
cmd_done<= cmd_done;
end
end
always @(posedge clk_seri)
begin
if(rst)
begin
dina<= 0;
wea<= 1;
addra<= 0;
end
else if(cmd_rdy)
begin
case(instr_code)
//********A--D是外部PN码，将其存入ROM中********//
ser_asf<= 0;
ser_ftw<= 0;
end
else if(cmd_rdy)
begin
case(instr_code)
4'h6:
begin
ser_ftw<=cmd_data;
cmd_done<=0;
end
4'h7:
begin
modu_sel<= cmd_data[25:24];
cmd_done<= 0;
input wire rst,
input wire RxD,
output reg[1:0] modu_sel,//BPSK,QPSK,8PSK选择
output reg[13:0] ser_asf, //由串口发过来的asf
output reg[31:0] ser_ftw,//由串口发过来的ftw
output reg cmd_done,//上位机给FPGA发送指令结束
instr_cnt<= 2'd3;
data_rec_valid<= 0;
end
else
begin
instr_cnt<= 2'd0;
data_rec_valid<= 1;
instr_code<=RxD_data[3:0]; //用来分辨各命令
end
default:
begin
instr_cnt<= 2'd0;
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Serial_Decoder(
input wire clk_seri, //串口时钟，用于从串口发送命令给FPGA
end
else
begin
instr_cnt<=2'd0;
data_rec_valid <= 0;
end
2'd1:
if(RxD_data== 8'h55)
begin
instr_cnt<= 2'd2;
data_rec_valid <= 0;
end
else
begin
instr_cnt<= 2'd0;
data_rec_valid<= 0;
4'hA:
begin
dina<= cmd_data;
wea<= 1;
addra<= 2'd0;
end
4'hB:
begin
dina<= cmd_data;
wea<=1;
addra<= 2'd1;
end
4'hC:
begin
dina<=cmd_data;
wea<=1;
addra<= 2'd2;
end
4'hD:
begin