break;
case 0x05://key-press 8
kbd_buff=0x008F;
LED_CS3 = kbd_buff;
LED_CS2 = 0x8F8F;
LED_CS4 = 0xEF;
break;
case 0x10://key-press 9
kbd_buff=0x8F18;
LED_CS2 = kbd_buff;
#define LED_CS4(*((volatile unsigned char *)(0x10500000)))
#define LED_VALUE (0xff)
int i;
void Delay(unsigned int x)
{
unsigned int i, j, k;
for (i =0; i <=x; i++)
LED_CS4 = 0x7F;
break;
case 0x02://key-press 2
kbd_buff=0x248F;
LED_CS2 = kbd_buff;
LED_CS3 = 0x8F8F;
LED_CS4 = 0xBF;
break;
case 0x04://key-press 3
kbd_buff=0x8F30;
int i;
void Delay(unsigned int x)
{
unsigned int i, j, k;
for (i =0; i <=x; i++)
for (j = 0; j <0xff; j++)
for (k = 0; k <0xff; k++);
}
void dummyOs(void)
{
while (1)
3.掌握键盘输入的编程方法
实验要求：
1.对所有16个按键进行编码，如使用一位数字[0-F,也可以用两位]
2.当按键后，在七段数码管上显示对应的键盘编码。
3.在跑码灯上显示相应二进制数。
实验代码：
#include <stdio.h>
#include "register_variant.h"
#define LED_CS2(*((volatile unsigned short int *)(0x10300000)))//LED1 and LED2
LED_CS2 = 0x0308; //A b
LED_CS3 = 0x0646; //C E
LED_CS4 = (LED_VALUE << i) -1;
if(i <= 8) i++;
else i = 0;
Delay(200);
}
}
实验总结：
键盘实验实验报告
实验目的：
1.了解直入键盘与矩阵键盘的原理
2.了解键盘寄存器的功能
#define LED_CS3(*((volatile unsigned short int *)(0x10400000)))//LED3 and LED4
#define LED_CS4(*((volatile unsigned char *)(0x10500000)))
#define LED_VALUE (0xff)
char m = 0, n = 0;
unsigned short int kbd_buff;
m = KPDK_VALUE ;
n = KAPS_VALUE ;
switch (m)
{
case 0x40://key-press 1
kbd_buff=0x8F79;
LED_CS2 = kbd_buff;
LED_CS3 = 0x8F8F;
for (i =0; i <=x; i++)
for (j = 0; j <0xff; j++)
for (k = 0; k <0xff; k++);
}
void dummyOs(void)
{
while (1)
{
LED_CS4 = 0x00;
for (i = 8; i >=1; i--)
{
LED_CS4 = (LED_VALUE >> i) +1;
{
LED_CS4 = 0xff;
for (i = 1; i <8; i=i+2)
{
LED_CS4 = (LED_VALUE << i) -1;
Delay(200);
}
for (i = 7; i > 1; i=i-2)
{
LED_CS4 = (LED_VALUE << i) -1;
Delay(200);
LED_CS3 = 0x8F8F;
LED_CS4 = 0x6F;
break;
case 0x11://key-press 10
kbd_buff=0x088F;
LED_CS2 = kbd_buff;
LED_CS3 = 0x8F8F;
LED_CS4 = 0xAF;
for (i =0; i <=x; i++)
for (j = 0; j <0xff; j++)
for (k = 0; k <0xff; k++);
}
void dummyOs(void)
{
while (1)
{
LED_CS4 = 0x00;
for (i = 8; i >=1; i--)
{
LED_CS4 = (LED_VALUE >> i) +1;
LED_CS3 = 0x2430; //3 2
LED_CS4 = (LED_VALUE << i) -1;
if(i <= 8) i++;
else i = 0;
Delay(200);
LED_CS2 = 0x4024; //2 0
LED_CS3 = 0x3030; //3 3
LED_CS4 = (LED_VALUE << i) -1;
if(i <= 8) i++;
else i = 0;
Delay(200);
LED_CS2 = 0x0308; //A b
LED_CS3 = 0x0646; //C E
LED_CS4 = (LED_VALUE << i) -1;
if(i <= 8) i++;
else i = 0;
Delay(200);
#define LED_CS3(*((volatile unsigned short int *)(0x10400000)))//LED3 and LED4
#define KPDK_VALUE(*((volatileunsigned char *)(0x41500008)))//Direct Keypad
LED_CS3 = kbd_buff;
LED_CS2 = 0x8F8F;
LED_CS4 = 0x3F;
break;
case 0x20://key-press 4
kbd_buff=0x198F;
LED_CS3 = kbd_buff;
LED_CS2 = 0x8F8F;
LED_CS4 = 0xDF;
break;
int i;
void Delay(unsigned int x)
{
unsigned int i, j, k;
for (i =0; i <=x; i++)
for (j = 0; j <0xff; j++)
for (k = 0; k <0xff; k++);
}
void dummyOs(void)
{
while (1)
default: kbd_buff=0x8F8F; break;
}
switch (n)
{
case 0x00://key-press 5
kbd_buff=0x8F12;
LED_CS2 = kbd_buff;
LED_CS3 = 0x8F8F;
LED_CS4 = 0x5F;
break;
case 0x01://key-press 6
boot实验报告
本次实验由于时间限制，共完成了三种不同的变化方式，但是课后又设计了一些其他的变化方式。
1、从左到右，再从右到左亮灯，不断循环
#define LED_CS4(*((volatile unsigned char *)(0x10500000)))
#define LED_VALUE (0xff)
{
LED_CS2 = 0x8f8f; //0 0
LED_CS3 = 0x8f8f; //0 0
while(1)
{
//Delay(100);
LED_CS2 = 0x4024; //2 0
LED_CS3 = 0x2430; //3 2
LED_CS4 = (LED_VALUE << i) -1;
if(i <= 8) i++;
Delay(200);
}
}
}
2、从左到右，再从右到左灯灭，不断循环
#define LED_CS4(*((volatile unsigned char *)(0x10500000)))
#define LED_VALUE (0xff)