目測eyeballing
100%
全检All inspection
操作员自检The operator self-inspection
目測eyeballing
2PCS
2H
PQC抽检记录
4
装配灯罩，锁灯罩扣位片，涂704硅胶（水泥电阻）Assembly of chimney, chimney screw slice, with 704 silica gel (cement resistor)
外观appearance
1.检查壶身是否有裂痕，刮伤，变形，凹点，卷边狗牙，水窗是否有反边不良。Check for cracks in pot body, scratches, deformation, pits, edge dog teeth, bad water window if there is a reverse side 2.发热盘冷针无生锈，松动，蒸汽管钎焊不良等。Hot plate cold needle without rust, loose, steam pipe and poor soldering. 3.码仔焊接不良。Code bad welding 4.密封圈装到位，不能有烂/脏污Sealing ring installed in place, there can be bad/dirt
目測eyeballing
100%
All inspection
操作员自检The operatorself-inspection
目測eyeballing
2PCS
2H
PQC抽检spot check
3
组装水窗（左）Assemble the water window
外观appearance
1.水窗装到位不能有爆裂/顶白/丝印不良Long nose pliers water window is installed in place cannot have burst/white/screen printing is bad
小家电产品制程过程IPQC检验控制计划中英文版
机种：
type of machine
KETTLE
MODEL NO.: XXX
sampling standard抽样方案：GB/T2828.1-2012
AQL:Crit=（A）0 Maj=（B）1.0 Min（C）2.5
number
checking item:
碰焊机Touch welding machine
外观appearance
1.焊接面有方向，焊接顶面要平整/焊接面积不少于2/3 2.焊接牢固不能脱焊。≥9kg的拉力3.装配开关装饰不能有裂痕/顶白/装不到位的现象。1. Welding surface has direction, top surface is flat and level/welding area of not less than two-thirds (2) welding is firm cannot desoldering. Of 9 kg or pull 3. Decoration assembling switch cannot have crack/white/assembly does not reach the designated position phenomenon.
检验需求/依据support document
检验方法/计量工具checking method/ checking
sample size
AQL level
remark
Process:
assembly
Provide department：
QC
version：
A/0
number：
PQC001
编号
Process name
外观appearance
1.检查灯罩整体是否完整,且灯孔外罩有无气泡。
2.锁灯罩扣位要扭紧/到位。
3..涂硅胶要均匀/锁水泥电阻要牢固。
1.Check the lamp shade is complete whole, and light hole cover any air bubbles.
2. Lock the lampshade buckle fastening/in place. 3. Coated silica gel evenly/cement resistance to strong lock.
fixed
Product features
parameters
Key control characteristics
检测方法
Testing tools
inspection
Control method
sampling fraction
sampling frequency
1
取检煲身/装配灯罩密封圈Take pot body/assembly chimney sealing ring
目測eyeballing
100%
全检All inspection
操作员自检The operator self-inspection
目測eyeballing
目測eyeballt check
目測eyeballing
100%
All inspection
操作员自检The operator self-inspection
目測eyeballing
2PCS
2H
IPQC抽检spot check
2
组装水窗（右）Assemble the water window
外观appearance
1.水窗装到位不能有爆裂/顶白/丝印不良Long nose pliers water window is installed in place cannot haveburst/white/screen printing is bad
目測eyeballing
100%
全检All inspection
操作员自检The operator self-inspection
目測eyeballing
2PCS
2H
PQC抽检spot check
5
碰焊端子，装配开关装饰，放云母片Touch welding terminals, decoration, assembling switch put mica sheet