锘?========================================================= ! 銆怲his is the standard config.pro file of cadstudio銆? ! 銆怌reated by YGZ, all rights reserved銆?!========================================================= !== Environment Options ================================== todays_date_note_format %Mmm %dd, %yyyydisplay HIDDENVISprovide_pick_message_always YESshade_with CURVESUSE_DIMENSIONED_EDGES NOflip_arrow_scale 2parenthesize_ref_dim YESretain_pattern_definition YEScompress_output_files NOinfo_output_mode SCREENiconify_entire_pro YESquery_bin_start YESshow_axes_for_extr_arcs YESsim_pp_background_color bluesystem_background_color bluepro_ansys_path C:\Program Files\Ansys Inc\v90\ANSYS\binauto_show_3d_detail_items nofloating_layer_tree nopro_unit_length UNIT_MMpro_unit_mass unit_kilogramdefault_dec_places 3sketcher_dec_places 3enable_absolute_accuracy YESdefault_abs_accuracy 0.05mech_home C:\ptc\promech20\i486_ntpath c:\ptc\promech20\i486_nt\bin; c:\ptc\promech20\i486_nt; check!== Window Setup =========================================thermo_position_hint NO_WINDOW_OVERLAPMENU_HORIZONTAL_HINT RIGHTvisible_message_lines 2!== DRAWING STANDARDS ====================================format_setup_file E:\02.3D\PRODIR\standard\My_standard.dtldrawing_setup_file E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\My_standard.dtlbom_format $PRODIR\..\pro_stds\configs\My_standard.txtcreate_drawing_dims_only YEShighlight_new_dims YESallow_move_attach_in_dtl_move YESrename_drawings_with_assem YESgtol_dim_placement UNDER_VALUEmark_approximate_dims YESprojection_type first_angle!== Tolerance Setup ======================================tol_mode nominaltolerance_standard ISOtolerance_class MEDIUMtol_display YESmaintain_limit_tol_nominal YES!== PRO SEARCH DIRECTORIES ===============================trail_dir C:\TEMPpro_group_dir $PRODIR\..\pro_stds\group_dirpro_symbol_dir $PRODIR\..\pro_stds\symbol_dirpro_format_dir $PRODIR\..\pro_stds\format_dirpro_material_dir c:\materialspro_dtl_setup_dir e:\02.3d\pro_library_dir e:\ProLibs\pro_catalog_dir e:\ProLibs\save objects changed!== LAYER DEFAULTS =======================================def_layer LAYER_DATUM 1_ALL_PLANESdef_layer LAYER_CSYS 2_ALL_CSYSdef_layer LAYER_AXIS 3_ALL_AXESdef_layer LAYER_POINT 4_ALL_POINTSdef_layer LAYER_CURVE 5_ALL_CURVESdef_layer LAYER_SURFACE 6_ALL_SURFSdef_layer LAYER_FEATURE 7_ALL_FEATURESdef_layer LAYER_DETAIL_ITEM 8_ALL_NOTES_BALLOONS_SYMBOLS_GTOLS(FREE) !== MAPKEYS ==============================================! This makey is used to setup default datum planes:! This makey is used to setup default views:! This makey is used to setup default parameters:! This mapkey is used to start a new part:! This mapkey is used to start a new sheetmetal part:! This mapkey is used to start a new assemble:dialog_translation yesmenu_translation yesallow_anatomic_features yesdefault_draw_scale 1clock nosave_model_display shading_lodsketcher_intent_manager yespro_unit_sys mmksmodel_tree_start yessearch_path c:\materialsPROE\YLP150_00_LIFTING_PLATFORM_ASSEMBLYsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_00_LIFTING_PLATFORM_ASSEMBLY_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_01_Fence_postsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_02_End_fencesearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_02_End_fence_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_03_0_8m_side_fencesearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_03_0_8m_side_fence_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_04_0_8m_deck_sectionsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_04_0_8m_deck_section_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_05_1_5m_side_fencesearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_05_1_5m_side_fence_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_06_1_5m_deck_sectionsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_06_1_5m_deck_section_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_07_Gate_with_side_postsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_07_Gate_with_side_post_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_08_Stairssearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_09_GROUND_FRAMEsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_12_RED_TOP_MASTPROE\YLP150_13_MAST_SECTIONsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_14_DRIVE_UNITsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_16_TIESsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_17_MAST_GUARDsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_18_Side_posts_mast_guardssearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_18_Side_posts_mast_guards_V1_1search_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_20_Platform_outriggersearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_21_Electrical_control_boxsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_22_Erection_cranesearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_23_PLATFORM_EXTENSIONsearch_path E:\02.3D\tempsearch_path E:\PROE\鐖 崌寮忓伐浣滃钩鍙版ā鍨媉PROE\YLP150_16_TIES_A search_path E:\PROE\鍚婃 \intf2d_out_enhanced_ents spline_and_hatchintf2d_out_pnt_ent nodxf_out_stroke_text noneintf2d_out_blanked_layers nointf_out_layer nonedxf_out_comments nointf2d_out_acad_mtext yesintf2d_out_acad_text_align as_isdxf_out_sep_dim_w_breaks nointf2d_out_open_log_window nodwg_export_format 2004mapkey 1 @MAPKEY_LABELr;~ Command `ProCmdFtExtrude` ;\mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\mapkey(continued) ~ Trigger `extrev_1_placement.0.0` `PH.section_select_list` `0`;\mapkey(continued) ~ Trigger `extrev_1_placement.0.0` `PH.section_select_list` ``;\mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;@PAUSE_FOR_SCREEN_PICK;\mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_1`;mapkey 2 @MAPKEY_LABEL璁剧疆鍗曚綅;~ Command `ProCmdMmSetup` ;#MATERIAL;\mapkey(continued) ~ Select `material_finder` `MtrlFFileListPHLay.Filelist`1 `steel.mtl`;\mapkey(continued) ~ Activate `material_finder` `MtrlFFromLibToModelPush`;\mapkey(continued) ~ Activate `material_finder` `MtrlFOkPush`;#UNITS;\mapkey(continued) ~ Select `um_finder` `SystemsFinderList`1 `sysunits7`;\mapkey(continued) ~ Activate `um_finder` `PrincipalPush`;\mapkey(continued) ~ Select `um_sys_conv_new` `ConvertRadio`1 `interpret numbers`;\mapkey(continued) ~ Move `um_sys_conv_new` `um_sys_conv_new`2 20.99315717.736070 ;\mapkey(continued) ~ Activate `um_sys_conv_new` `OKStd`;\mapkey(continued) ~ Move `um_finder` `um_finder`2 19.816227 8.785924 ;\mapkey(continued) ~ Activate `um_finder` `ClosePush`;#DONE;mapkey 4 @MAPKEY_LABEL閲嶅懡鍚?~ Command `ProCmdModelRename` ;\mapkey(continued) ~ Input `rename` `InputPanel2` `S`;~ Input `rename` `InputPanel2` `SS`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SSF`;~ Input `rename` `InputPanel2` `SS`;\mapkey(continued) ~ Input `rename` `InputPanel2` `S`;~ Input `rename``InputPanel2` `SF`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF2`;~ Input `rename` `InputPanel2` `SF22`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_0`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?1`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?1鈥擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?1鈥斺€擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?1鈥擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?1`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€?`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥斺€擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01鈥擿;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_0`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_0_`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01_`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01_0`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01_01`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01_01_`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01_01_0`;\mapkey(continued) ~ Input `rename` `InputPanel2` `SF22_01_01_02`;\mapkey(continued) ~ Update `rename` `InputPanel2` `SF22_01_01_02`;~ Activate `rename` `OK`;\mapkey(continued) ~ Activate `UI Message Dialog` `ok`;mapkey $F1 @MAPKEY_NAMECreate default datum planes;\mapkey(continued)@MAPKEY_LABELdefault_datums;#FEATURE;#CREATE;#DATUM;#PLANE;#DEFAULT ;#DONE;\mapkey(continued) #SET UP;#NAME;#SEL BY MENU;#NAME;~ Select `sellist0` `Namelist`1 `DTM1`;\mapkey(continued) side;#SEL BY MENU;#NAME;~ Select `sellist0` `Namelist`1 `DTM2`;top;\mapkey(continued) #SEL BY MENU;#NAME;~ Select `sellist0` `Namelist`1 `DTM3`;front;#DONE;mapkey $F2 @MAPKEY_NAMECreate default views;@MAPKEY_LABELdefault_views;\mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewOrient.view`;#SEL BY MENU;#DATUM;#NAME;\mapkey(continued) ~ Select `sellist0` `Namelist`1 `FRONT`;#SEL BY MENU;#DATUM;#NAME;\mapkey(continued) ~ Select `sellist0` `Namelist`1 `TOP`;\mapkey(continued) ~ Activate `orient` `NmViewCheckBtn`1 ;\mapkey(continued) ~ Input `orient` `Vw_IP` `f`;\ mapkey(continued) ~ Input `orient` `Vw_IP` `fr`;\ mapkey(continued) ~ Input `orient` `Vw_IP` `fro`;\ mapkey(continued) ~ Input `orient` `Vw_IP` `fron`;\ mapkey(continued) ~ Input `orient` `Vw_IP` `front`;\ mapkey(continued) ~ Update `orient` `Vw_IP` `front`;\ mapkey(continued) ~ Activate `orient` `Vw_PB_Save`;\mapkey(continued) ~ Activate `orient` `orientsurfPH.OrientSel1`;#SEL BY MENU;#DATUM;#NAME;\mapkey(continued) ~ Select `sellist0` `Namelist`1 `TOP`;\mapkey(continued) ~ Open `orient` `orientsurfPH.OrientRef2`;\mapkey(continued) ~ Close `orient` `orientsurfPH.OrientRef2`;\mapkey(continued) ~ Select `orient` `orientsurfPH.OrientRef2`1 `Bottom`;#SEL BY MENU;#DATUM;\mapkey(continued) #NAME;~ Select `sellist0` `Namelist`1 `FRONT`;\mapkey(continued) ~ Input `orient` `Vw_IP` `t`;\mapkey(continued) ~ Input `orient` `Vw_IP` `to`;\mapkey(continued) ~ Input `orient` `Vw_IP` `top`;\mapkey(continued) ~ Update `orient` `Vw_IP` `top`;\mapkey(continued) ~ Activate `orient` `Vw_PB_Save`;\mapkey(continued) ~ Activate `orient` `orientsurfPH.OrientSel1`;#SEL BY MENU;#DATUM;#NAME;\mapkey(continued) ~ Select `sellist0` `Namelist`1 `SIDE`;#SEL BY MENU;#DATUM;#NAME;\mapkey(continued) ~ Select `sellist0` `Namelist`1 `TOP`;\mapkey(continued) ~ Input `orient` `Vw_IP` `s`;\mapkey(continued) ~ Input `orient` `Vw_IP` `si`;\mapkey(continued) ~ Input `orient` `Vw_IP` `sid`;\mapkey(continued) ~ Input `orient` `Vw_IP` `side`;\mapkey(continued) ~ Update `orient` `Vw_IP` `side`;\mapkey(continued) ~ Activate `orient` `Vw_PB_Save`;~ Activate `orient` `OkPB`;\mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewDefault.view`;mapkey $F3 @MAPKEY_NAMECreated default parameters;\mapkey(continued) @MAPKEY_LABELdefault_parameters;#SET UP;#PARAMETERS;#CREATE;#STRING;designer;\mapkey(continued) Yan Guozhong;#STRING;dwg_number;<EMPTY_STR>;#STRING;material;steel;\mapkey(continued) #REAL NUMBER;weight;;#DONE;mapkey $F5 @MAPKEY_NAMEStart a new part.;@MAPKEY_LABELstart_part;\mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;~ Activate `new` `OK`;\mapkey(continued) #COPY FROM;~ Open `file_open` `Ph_path.Path`;\mapkey(continued) ~ Close `file_open` `Ph_path.Path`;\mapkey(continued) ~ Select `file_open` `Ph_path.Path`1 `C:`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `start_files`;\mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `start_files`;\mapkey(continued) ~ Activate `file_open` `Open`;mapkey $F6 @MAPKEY_NAMEStart a new sheetmetal part.;@MAPKEY_LABELstart_shmtl;\mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\mapkey(continued) ~ Select `new` `part`1 `Sheetmetal`;~ Activate `new` `OK`;#COPY FROM;\mapkey(continued) ~ Open `file_open` `Ph_path.Path`;~ Close `file_open` `Ph_path.Path`;\mapkey(continued) ~ Select `file_open` `Ph_path.Path`1 `C:`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `start_files`;\mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `start_files`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `start_sheetmetal.prt`;\mapkey(continued) ~ Activate `file_open` `Open`;;mapkey $F7 @MAPKEY_NAMEStart a new assemble.;@MAPKEY_LABELstart_assm;\ mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelNew.file`;\mapkey(continued) ~ Select `new` `Type`1 `Assembly`;~ Activate `new` `OK`;#COPY FROM;\mapkey(continued) ~ Open `file_open` `Ph_path.Path`;~ Close `file_open` `Ph_path.Path`;\mapkey(continued) ~ Select `file_open` `Ph_path.Path`1 `C:`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`0 ;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `pro_stds`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `start_files`;\mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist`1 `start_files`;\mapkey(continued) ~ Activate `file_open` `Open`;mapkey r @MAPKEY_LABELrotation;~ Command `ProCmdFtExtrude` ;\mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;@PAUSE_FOR_SCREEN_PICK;\mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_1`;mapkey s @MAPKEY_LABELoptions;~ Command `ProCmdUtilPref` ;\mapkey(continued) ~ FocusOut `preferences` `InputOpt`;~ Activate `preferences` `Open`;\mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `current_session.pro`;\mapkey(continued) ~ Activate `file_open` `Open`;~ Activate `preferences` `ApplySave`;\mapkey(continued) ~ FocusOut `preferences` `InputOpt`;~ Activate `preferences` `Close`;mapkey 3 @MAPKEY_LABEL鍒涘缓瀛?~ Command `ProCmdHole` ;\mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.hole_fb_plcmnt_page.0`1 ;\mapkey(continued) ~ Trigger `hole_fb_plcmnt_page.0.0` `PH.ui_hole_prim_ref_cui_lst` `0`;\mapkey(continued) ~ Trigger `hole_fb_plcmnt_page.0.0` `PH.ui_hole_prim_ref_cui_lst` ``;\mapkey(continued) ~ Trigger `hole_fb_plcmnt_page.0.0` `PH.ui_hole_prim_ref_cui_lst` ``;\mapkey(continued) @PAUSE_FOR_SCREEN_PICK;~ Enter `main_dlg_cur` `dashInst0.gP`;\mapkey(continued) ~ Exit `main_dlg_cur` `dashInst0.gP`;~ Enter `main_dlg_cur` `dashInst0.gP`;\mapkey(continued) ~ Exit `main_dlg_cur` `dashInst0.gP`;mapkey 2 @MAPKEY_LABEL璁剧疆鍗曚綅;~ Command `ProCmdMmSetup` ;#MATERIAL;\mapkey(continued) ~ Select `material_finder` `MtrlFFileListPHLay.Filelist`1 `steel.mtl`;\mapkey(continued) ~ Activate `material_finder` `MtrlFFromLibToModelPush`;\mapkey(continued) ~ Activate `material_finder` `MtrlFOkPush`;#UNITS;\mapkey(continued) ~ Select `um_finder` `SystemsFinderList`1 `sysunits7`;\mapkey(continued) ~ Activate `um_finder` `PrincipalPush`;\mapkey(continued) ~ Select `um_sys_conv_new` `ConvertRadio`1 `interpret numbers`;\mapkey(continued) ~ Activate `um_sys_conv_new` `OKStd`;~ Activate `um_finder` `ClosePush`;\mapkey(continued) #MASS PROPS;\mapkey(continued) ~ Resize `mpsetupdlg` `mpsetupdlg`4 28.355816 13.0283486.459433 5.884653 ;\mapkey(continued) ~ Move `mpsetupdlg` `mpsetupdlg`2 28.355816 13.028348 ;\mapkey(continued) ~ Move `mpsetupdlg` `mpsetupdlg`2 21.458456 11.276637 ;\mapkey(continued) ~ Update `mpsetupdlg` `MP_DENSITY` `7.8e-6`;~ Activate `mpsetupdlg` `OK_PB`;\mapkey(continued) #DONE;mapkey 0 @MAPKEY_LABEL瀵煎浘2004;~ Command `ProCmdModelSaveAs` ;\mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\mapkey(continued) ~ Select `file_saveas` `type_option`1 `db_560`;\mapkey(continued) ~ Activate `file_saveas` `OK`;~ Activate`export_2d_dlg` `OK_Button`;\mapkey(continued) ~ FocusIn `UI Message Dialog` `cancel`;\mapkey(continued) ~ Activate `UI Message Dialog` `cancel`;\mapkey(continued) ~ Update `export_2d_dlg` `File_Name_Input_Panel` `zld1_5b3.dwg`;\mapkey(continued) ~ Activate `export_2d_dlg` `OK_Button`;mapkey 1 @MAPKEY_LABELr;~ Command `ProCmdFtRevolve` ;\mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.revolve_1_placement.0`1 ;\mapkey(continued) ~ Trigger `revolve_1_placement.4.0` `PH.section_select_list` `0`;\mapkey(continued) ~ Trigger `revolve_1_placement.4.0` `PH.section_select_list` ``;\mapkey(continued) ~ Activate `revolve_1_placement.4.0` `PH.Sketch`;@PAUSE_FOR_SCREEN_PICK;\mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_1`;mapkey 4 @MAPKEY_LABEL閲嶅懡鍚?~ Command `ProCmdModelRename`;mapkey 0 ~ Command `ProCmdModelSaveAs` ;\mapkey(continued) ~ Activate `file_saveas` `Current Dir`;\mapkey(continued) ~ Select `file_saveas` `ph_list.Filelist`1 `daotuyong`;\mapkey(continued) ~ Activate `file_saveas` `ph_list.Filelist`1 `daotuyong`;\mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\mapkey(continued) ~ Select `file_saveas` `type_option`1 `db_560`;\ mapkey(continued) ~ Activate `file_saveas` `OK`;~ Activate `export_2d_dlg` `OK_Button`;。