arcoutput:2# 0二IJK, 1二R no sign, 2 = R signed neg・over 180
breakarcs:0#Break arcs, 0 = no, 1 = quadrants, 2 = 180deg・max arcs
stagetool:0#0二Do not pre-stage tools, 1 = Stage tools
#
#Options/Usage:
#It is recommended to start and end cutter compensation oncjlinear move.
#Rotary axis assumes a”Z” plunge at feed into part, position of the
# 1二Output post to screen, 2二output leader to screen
#Append postline labels, norvzero is column position?
#Append whatline no. to each NC line?
#Append NCI line no. to each NC line?
#1thru 3 = Reference return is generated and G92 with the
#X, Y and Z home positions at each tool.
#4 thru 9 = The WCS of G54 thru G59 respectively at each tool.
# Axis output formats-Linear
fmt
X 1 x
# X axis position
fmt
Y 1 y
# Y axis position
fmt
Z 1 z
# Z axis position
fmt
X 1 xr
# X rapid position from tool change
fmt
#substituted axis at absolute zero position and the retraction from path
#by the post call to the G28 machine Z home position.
# DEBUG/PROGRAM SWITCHES, debugging ond program switches
MasterCAM9.1后处理自动生成刀具清单，使用方法:
将下面的容复制到记事本，并将其更名为Mpfan.pst, pst为后缀，再将该文件
拷贝至MasterCAM9.1的安装目录C:\Mcam9\Mill\Posts,覆盖原文件，然后启动软件,
可以在NC程序开头生成刀具清单。经典版本，绝对好用！
:MPFAN
use.gear:no # Set to yes to output gear range codes
# FORMAT STATEMENTS-n=nonmodalzl=leadingzt二trailing, i二inc. d=delta
fs
1
0.3
#Decimal absolute, 4 place
Y 1 yr
# Y rapid position from tool chcinge
fmt
Z 1 zr
# Z rapid position from tool change
fபைடு நூலகம்t
X 1 xh
# X home position
fmt
Y 1 yh
# Y home position
fmt
Z 1 zh
# Z home position
#Do not perform whatline branches?
#Use Version 7 toolname, 1= path components, 2=string
#Find geode 1004 with getnextop?
#Use Version 7 style contour flags?
#
##| FEATURES：# Users Note: #
#Following Misc.Reals&Miscjntegers are used:
#
#mil-Work coordinate system
#0二Referenee return is generated and G92 with the X, Y and Z home positions at file head.
fs
8
0.2
#Decimal absolute, 2 place
fs
9
0.3
#Decimal absolute, 3 place
fs
10 0 4t
#No decimal absolute, four trailing
fs
11 0.4t
#Decimal absolute, four trailing
#FORMAT ASSIGNMENTS
#球
#*DO NOT DISTRIBUTE ! ! !
#****察*****車車****京************康*********京**木**京******本**京**本**本**本*******
#
#
# |REVISION LOG|
#Programmers Note:
#CNC 8/15/2005-grt-Updated for Mill Version 6
:MILL
:FANUC
：6M
:GENERIC FANUC 6M STYLE POST
■
:NO
:NO
:NO
:MP 4.03 #
#*京**車*****車******************/************京*******%**車*（車************
#**
#*POST PROCESSOR INTENDED FOR VERSION 6 BETA TESTING
fs
2
0.4d
#Decimal delta
fs
3
1 0
#lntegerznot leading
fs
4
2 01
#lnteger, two leading
fs
5
3 01
#lnteger, three leading
fs
6
4 01
#lntegec four leading
fs
7
0」
#Decimal absolute, 1 place