表1美国已公布的电动汽车及混合动力电动汽车SAE标准
标准代号标准名称（英文）标准名称（中文）
Vehicle Systems整车系统
SAE J551/5-1997Performance Levels and Methods of Measurement of Magnetic and Electric
Field Strength from Electric Vehicles,Broadband,9kHz To30MHz
电动汽车电磁强度（带宽9kHz~30MHz）的特点和
测量方法
SAE J1634Electric Vehicle Energy Consumption and Range Test电动汽车能量消耗和续驶里程试验方法
SAE J1666Electric Vehicle Acceleration,Gradeability and Deceleration Test
Procedure
电动汽车加速、爬坡能力和减速试验方法
SAE J1711Recommended Practice for Measuring the Exhaust Emissions and Fuel economy
of Hybrid-Electric Vehicles
混合动力电动汽车燃料经济性和排放污染物检测
推荐规程
SAE J1715Hybrid Electric Vehicle(HEV)and Electric Vehicle(EV)Terminology混合动力电动汽车和电动汽车术语SAE J2344Guidelines for Electric Vehicle Safety电动汽车安全导则
SAE J2464Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System
(RESS)Safety and Abuse Testing
电动和混合动力电动汽车充电储能安全和滥用试
验
SAE J2711Recommended Practice for Measuring Fuel Economy and Emissions of
Hybrid-Electric and Conventional Heavy Duty Vehicles
重型混合动力电动汽车、传统汽车能量消耗及排
气污染物试验方法推荐规程
SAE J2758Determination of the Maximum Available Power from a Rechargeable Energy
Storage System on a Hybrid Electric Vehicle
混合动力汽车的充电储能系统最大功率的测定方
法
Batteries电池
SAE J1766Recommended Practice for Electric and Hybrid Electric Vehicle Battery
Systems Crash Integrity Testing
电动和混合动力电动汽车蓄电池碰撞完整性试验
推荐规程
SAE J1797Recommended Practice for Packaging of Electric Vehicle Battery Modules电动汽车蓄电池组组装的推荐规程
SAE J1798Recommended Practice for Performance Rating of Electric Vehicle Battery
Modules
电动汽车蓄电池组性能评价推荐规程
SAE J2288Life Cycle Testing of Electric Vehicle Battery Modules电动汽车蓄电池组循环寿命试验SAE J2289Electric-Drive Battery Pack System:Functional Guidelines电驱动蓄电池系统功能要求SAE J2380Vibration Testing of Electric Vehicle Batteries电动汽车蓄电池的振动试验
Interface接口
SAE J1772SAE Electric Vehicle Conductive Charge Coupler电动汽车和插入式混合动力汽车传导充电连接器SAE J1773SAE Electric Vehicle Inductively-Coupled Charging电动车辆感应充电连接器
SAE J1850Class B Data Communications Network Interface B类数据通信网络接口
SAE J2293.2Energy Transfer System for EV Part2:Communications Requirements and
Network Architecture
电动车辆能量转换系统第2部分：通讯信号和
功能要求
Infrastructure基础设施
SAE J2293.1Energy Transfer System for EV Part1:Functional Requirements and System
Architecture
电动车辆能量转换系统第1部分：功能安全和
系统构造
SAE J2841Utility Factor Definitions for Plug-In Hybrid Electric Vehicles Using2001
U.S.DOT National Household Travel Survey Data
基于2001年美国运输部全国旅游家庭统计数据的
混合动力汽车实用因子的定义
表2美国计划制定的电动汽车及混合动力电动汽车SAE标准
标准代号标准名称（英文）标准名称（中文）
Vehicle Systems整车系统
SAE J2889Measurement of Minimum Sound Levels of Passenger Vehicles乘用车最低声级的测量
SAE J2894Part1Power Quality Requirements for Plug-In Vehicle Chargers-Requirements插入式混合动力车充电器的功率质量要求要求
SAE J2894Part2Power Quality Requirements for Plug-In Vehicle Chargers-Test Methods 插入式混合动力车充电器的功率质量要求测试
方法
SAE J2907Power Rating Method for Automotive Electric Propulsion Motor and Power
Electronics Sub-System
车辆电驱动电机和电子功率器件的功率评定方法
SAE J2908Power Rating Method for Hybrid-Electric and Battery Electric Vehicle
Propulsion
混合动力和纯电动车辆驱动功率评定方法
Interface接口
SAE J2836Part1Use Cases for Communications between Plug-In Vehicles and the Utility Grid Plug-in车辆与公用电网间的通讯用例
SAE J2836Part2Use Cases for Communications between Plug-In Vehicles and the Supply
Equipment(EVSE)
Plug-in车辆与供电设备（EVSE）间的通讯用例
SAE J2836part3Use Cases for Communications between Plug-In Vehicles and the Utility grid
for Reverse Flow
Plug-in车辆与公用电网间逆功率流的通讯用例
SAE J2847Part1Communications between Plug-In Vehicles and the Utility Grid Plug-in车辆与公用电网间的通讯SAE J2847Part2Communication between Plug-in Vehicles and the Supply Equipment(EVSE)Plug-in车辆与供电设备（EVSE）间的通讯
Communication between Plug-in Vehicles and the Utility Grid for Reverse
Power Flow Plug-in车辆与公用电网间逆功率流的通讯
SAE J2847Part3。