1.5m and above
1.9m and above
30 TPM
36 TPM
3
Continuous Miner
连续采煤机
Traditional Room and Pillar Continuous Miner operations produce on average 500,000 to 650,000 ing vehicle transportation, increasing up to 2 million t.p.y. when using the DBT continuous haulage system.
连续采煤机是采用房柱式开采煤矿的主要设备。 DBT公司最近对其连续采煤机进行 了改造和革新，使用过程中，您会发现 DBT公司的连续采煤机是您提高产量，降低吨煤 成本的关键设备。
Model Name 30M2
Min. Height 1.2m and above
Capacity 24 TPM
30M3
40M
1140 v 1067 53 2 x 37 0 26
2 x 167
1140 v 1067 53 2 x 37 0 26
2 x 261
1140 v 1346 53 2 x 41 0 28 6
Up 3.1M
24 567
30 587
36 812
Cutter Motor Power (kW)
Rated Voltage （v） Drum Dia. (mm) Drum Rotate (r/min) Haulage Power (kW) Haulage Speed (m/min)
2 x 167
随机安装的锚杆机装置在顶板破碎条件下 可及时进行支护。
5
Continuous Miner Specifications
连续采煤机规格
30M - 2 30M - 3
Up to 4.0 M
40M - 1
Up to 4.72 M
Working Height (m) Production Capacity (t/min) Total Power (kW)
The bolter Miner was developed to provide rapid driveage in single or double entry developments.
掘锚机适用于单巷或双巷掘进的快速开拓
The integrated bolter system, gives immediate support in weak roof conditions.
Cutting height Ranges from 1.2m to 5 m.
传统的房柱时连续采煤机配套使用车辆运输 时，其年产量平均为50至65万吨。如采用 DBT连续运煤系统配套运输时年产量可增加 到2百万吨。 DBT连续采煤机的切割高度范围为1.2米至5 米。
4
Bolter Miner
掘锚机
Continuous Miner & Bolter Miner 连续采煤机与带有锚杆机的连续 采煤机
1
Continuous Miner
连续采煤机
主机身宽度 3180MM
履带宽度 508MM
切割滚筒直径 1067MM
运输机深度 300MM
最小通过高度
2
Continuous Miner
连续采煤机
The workhorse of any room and pillar mines is the Continuous Miner. With its recent upgrades and engineering updates, the new DBT Continuous Miner will prove to be your key to increased production available and lower cost per ton.