Spirent Testcenter 自动化测试脚本TCL -1基本功能2015-06-18 浏览(69) #!/bin/sh#exec tclsh "$0" ${1+"$@"}#-----------------------------------------------------###-----------------------------------------------------#引用STC API ,的路径source {C:Program FilesSpirent CommunicationsSpirent TestCenter TestCenter }#开启日志，-logTo ：日志保存路径，使用stdout为标准输出； -loglevel ：可选DEBUG、INFO 、WARN 和ERROR 四种；stc::config automationoptions -logTo "" -logLevel DEBUG#配置机框Ip 槽位端口号set chassisAddress ""set slotPort1 "8/25"set slotPort2 "8/26"#创建一个项目set ProjectA [stc::create project]#在项目ProjextA 下创建一个发送端口和一个接收端口set TxPort [stc::create port -under $ProjectA]set RxPort [stc::create port -under $ProjectA]set portReturn [stc::config $TxPort -location"//$chassisAddress/$slotPort1"]set portReturn [stc::config $RxPort -location"//$chassisAddress/$slotPort2"]#配置端口类型，根据实际端口类型选择参数：Ethernet10GigFiber、Ethernet100GigFiber、Ethernet40GigFiber、Ethernet10GigCopper、EthernetCopper等；set ethernetFiber(1) [stc::create "Ethernet10GigFiber" -under $TxPort-Name "ethernetFiber 1"]set ethernetFiber(2) [stc::create "Ethernet10GigFiber" -under $RxPort-Name "ethernetFiber 2"]#在发送端口下创建StreamBlock(1)set StreamBlock(1) [stc::create "StreamBlock"-under $TxPort-frameConfig ""-FrameLengthMode "FIXED"-FixedFrameLength "222"-name "StreamBlock_1"]#在StreamBlock(1)中添加EthII头set StrEthII [stc::create ethernet:EthernetII -under $StreamBlock(1) -name eht_1 -srcMac 11:11:11:11:11:11 -dstMac 22:22:22:22:22:22 ]#添加IPv4头set strIPv4 [stc::create ipv4:IPv4 -under $StreamBlock(1) -name Ipv4_1 -sourceAddr -destAddr#添加TCP头set strTcp [stc::create tcp:Tcp -under $StreamBlock(1) -name tcp1-sourcePort 10 -destPort 20 ]#创建Streamblock2set StreamBlock(2) [stc::create "StreamBlock"-under $TxPort-frameConfig ""-FrameLengthMode "FIXED"-FixedFrameLength "222"-name "StreamBlock_2"]set StrEthII [stc::create ethernet:EthernetII -under $StreamBlock(2) -name eht_2 -srcMac 31:11:11:11:11:11 -dstMac 42:22:22:22:22:22 ]#添加IPv4头set strIPv4 [stc::create ipv4:IPv4 -under $StreamBlock(2) -name Ipv4_2 -sourceAddr -destAddr#添加TCP头set strTcp [stc::create udp:Udp -under $StreamBlock(2) -name tcp_2-sourcePort 40 -destPort 50 ]#配置StreamBlock(1)的modifier 可以选择RangeModifer 、RandomModifier 、TableModifier#StreamBlock1 源Ip 随机set RandomModifier1 [stc::create RandomModifier -under $StreamBlock(1) -Mask { -RecycleCount 10 -Offset 0 -EnableStream FALSE-OffsetReference {} ]#StreamBlock2 目的Ip 递增set RangeModifier2 [stc::create RangeModifier -under $StreamBlock(2)-ModifierMode INCR -Mask { -StepValue { -RecycleCount 10-RepeatCount 0 -Data { -EnableStream FALSE -Offset 0 -OffsetReference {} -Active true]#在发送端口创建generatorset generator1 [stc::get $TxPort -children-Generator ]stc::config $generator1 -Name "Generator_1"#配置generator1 ,set generatorConfig1 [stc::get $generator1 -children-GeneratorConfig ]#-------------------------------配置说明--------------------------------------------#SchedulingModes属性，可选参数：PORT_BASED 、RATE_BASED 、PRIORITY_BASED 、MANUAL_BASED#DurationMode属性，可选参数：CONTINUOUS 、BURSTS 、SECONDS 等，#LoadUnit属性，可选参数：PERCENT_LINE_RATE 、FRAMES_PER_SECOND 、BITS_PER_SECOND 、# KILOBITS_PER_SECOND 、MEGABITS_PER_SECOND 、INTER_BURST_GAP#--------------------------------------------------------------------------------- stc::config $generatorConfig1 -SchedulingMode "PORT_BASED"-DurationMode "BURSTS"-BurstSize 1-Duration 20#在接收端口创建analyzerset analyzer1 [stc::get $RxPort -children-Analyzer]#配置analyzerstc::config $analyzer1 -Name "Analyzer 1"set analyzerConfig1 [stc::get $analyzer1 -children-AnalyzerConfig]#-------------------------------配置说明-------------------------------------------- #TimestampLatchMode 属性，可选参数：START_OF_FRAME 、END_OF_FRAME##--------------------------------------------------------------------------------- stc::config $analyzerConfig1 -TimestampLatchMode "END_OF_FRAME" -JumboFrameThreshold "1500" -OversizeFrameThreshold "2000"-UndersizeFrameThreshold "64" -AdvSeqCheckerLateThreshold "1000" -Name "AnalyzerConfig_1"#配置实时结果获取#结果保存在与脚本相同路径下，结果文件名为result set generatorResult [ stc::subscribe -Parent $ProjectA-ResultParent $TxPort-ConfigType Generator-resulttype GeneratorPortResults-filenameprefix "result"]set analyzerResult [ stc::subscribe -Parent $ProjectA-ResultParent $RxPort-ConfigType Analyzer-resulttype AnalyzerPortResults-filenameprefix "result" ]#连接机框set resultReturn [ stc::connect $chassisAddress]#占用端口set resultReturn [ stc::reserve "//$chassisAddress/$slotPort1"] set resultReturn [ stc::reserve "//$chassisAddress/$slotPort2"] #配置抓包端口set captureRx [stc::get $RxPort -children-capture]set captureTx [stc::get $TxPort -children-capture]#-----------------------------------配置说明-------------------------------------##mode 属性，可选参数：REGULAR_MODE，抓所有报文；SIG_MODE：抓有signature的报文。